Reviews Tapping Die

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

  • Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

  • Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
  • ​​​A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
  • 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
  • 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
  • EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

uxcell Thread Milling Threading Tap 7/16\-20 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: M20 x 2.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 3/8\-24 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade

  • Tap Size: M10 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

AnNafi® MT3 Shank Threading & Tapping attachment-lathe tailstock die holder set | Machine Tools | Lathe Parts & Tool

  • ★✔️ AnNafi’s THREADING &TAPPING ATTACHMENT- LATHE TAILSTOCK DIE HOLDER SET -: Made of High Quality Tool Steel , this is a high quality product....
  • ★✔️ SIZE &CAPACITY -: Die Holder Sizes 13/16", 1" & 1-1/2”. 2 Tap Chucks Holding Capacity: 0 to 1/4" & 1/4" to 1/2".
  • ★✔️ CONTENT -: This comes along with 3 Allen Keys, Tailstock Arbor with #3 Morse Taper. Does not include dies and taps..
  • ★✔️ USES -: Used for threading and tapping purpose on the lathe machine. Comes in precisely ground MT3 Shank, that goes inside your lathe....
  • ★✔️ SATISFACTION GUARANTEED:- We provide 30 Days full Money Back Guarantee if there is any Manufacturing Defect. So Buy with Confidence..
Check Stock

Williams B-52A 3/8-Inch Drive Round Head Ratchet

  • Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
  • Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
  • Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check Stock