Reviews Tapered Reamer Tool For Metal

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • ...back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
  • Use with 3/8-inch drive ratchet or wrench.
  • Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
  • Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
  • Measure your plug diameter, thread, and pitch to see if this kit is compatible.
  • PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of inserts for your convenience.
Check Stock

Taper Shank Milling Cutting Tool, Machine Reamer Precise Grinding Grooves 6 Blades Cemented Carbide for Stainless Steel

  • Universal Shank Type: This is reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
  • Integral One Time Forming: This integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
  • Wide Application: This is reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
Check Stock

Sabo Lemon Citrus Reamer Juicer 4-in-1 Multitool with Zester Channel Knife Paring Knife for Cocktail and Bar

  • 4-in-1 MULTI TOOL: This multi tool features a lemon citrus reamer for juicing, a paring knife for cutting up lemons and citrus fruits, a channel knife and zester for peeling and garnishing. It is a handy bar tool for making cocktails, drinks, and garnishing along the way..
  • FOOD SAFE AND DURABLE: The citrus reamer is made with hard ABS plastic and is FDA compliant food safe. The paring knife and zester is made with sharp polished stainless steel and can last for a long time..
  • SAVE YOUR SHELF SPACE: For those who don’t want to have multiple tools hogging up your shelf space in your kitchen, this reamer combines multiple tools into one so you don’t have to look for each individual tool anymore..
  • JUST THE RIGHT SIZE: The reamer tool is 6″ long, and the reamer head is just the right size for the average citrus fruits like lemons and oranges..
  • DISHWASHER SAFE: The plastic reamer is dishwasher safe and very easy to clean..
Check Stock

4Pcs Drill Bridge/Construction Reamer Bit Set 3/8 1/2 5/8 3/4 with 1/2 Shank HSS Taper Chucking Reamer Bit Tool for Steel Metal Wood Alloy Drilling Hole with Aluminum Box

  • What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials.
  • Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials.
  • Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes.
  • Includes: 3/8" (fits 3/8'' shank collets), 1/2", 5/8" and 3/4" (fits 1/2'' shank collets).
  • Design: Tapered point design allows reamer bits to enter irregularly overlapping holes, aligning bolt holes.
  • three symmetrically placed flats on shank provide a secure grip for portable power and air tools.
Check Stock

Mxfans High Speed Steel 29.5-33.5mm Slitting Dia Adjustable Hand Operated Reamer

  • Fit for A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials, etc..
  • Functions:The reamer are used to remove the rotating tool that has been machined to the thin metal layer of the surface. The precise size and shape can be obtained after the hole is machined through the reamer..
Check Stock

uxcell Adjustable Hand Reamer 19-21mm High Speed Steel H8 6 Straight Flutes Milling Cutter Tool

  • High-speed Steel Tool: Good for general purpose applications, offering combination of hardness and toughness for wear resistance.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.
Check Stock

Machine Reamer, Carbide Taper Shank Milling Cutting Tool High Grinding Accuracy for Cast Iron

  • Universal Shank Type: This reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
  • Application: This is a reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
  • Fine Grinding Grooves: Precise grinding grooves, high efficiency and flexibility, direct unhindered chip removal, beautiful and delicate, effective, labor saving, and fast drilling speed.
  • Integral One Time Forming: Integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock

ATOPLEE T Handle Reamer Tapered Straight Flute Handle Hole Pipe Reaming Tool for Wood Latches/Guitar/Woodworker/Luthier/Repairman Maintenance,1/8-1/2 inch 3.18-12.7mm

  • {Good Quality Material}Made of hardened and tempered tool steel(45# steel) with precision ground cutting edges,more hardness and durable..
  • {T-Handle Design}Easy turning and sure handling .;The degree of the taper is:10.
  • {Many Usage}Enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs.Also perfect for when a drill could cause cracking in sheet metal, plastic and other materials with little effort..
  • Total Length:140mm ;Shank Diameter:13mm.
  • {Package Included} 1pcs Hand Tapered Reamer.
Check Stock