Reviews Tapered Reamer Set - BestBuyersPro.com

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..

What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials.
Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials.
Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes.
Includes: 3/8" (fits 3/8'' shank collets), 1/2", 5/8" and 3/4" (fits 1/2'' shank collets).
Design: Tapered point design allows reamer bits to enter irregularly overlapping holes, aligning bolt holes.
three symmetrically placed flats on shank provide a secure grip for portable power and air tools.

【High working efficiency】: This chucking machine reamer set has sharp cutting-edge, high efficiency cutting ability, high accuracy, so your work will become easier under the use of this tools set. Also, this set has a long-term using service life.
【High quality materials】: This set of cutter milling reamer is made of high quality and high speed steel materials, so these reamer cutters have high hardness.
【Specific and professional use】: This steel milling cutting tool set is designed for reaming to mold processing and handicraft processing.
【Wide using range】: This whole chucking reamer set can be widely used for bore machining, installed in drilling machine, milling machine, etc.
【Fine process】: This set of chucking reamer tools' surface has processed by iron, plastic, wood, copper, aluminum and other soft materials.

The Tapered Reamer is used to remove burrs from steel, brass, aluminum, plastic, wood and wall panels.
The T Reamers are Precisely machined cutting edges smooth the surface of the metal without effort.
Reamer T handle for easy reaming.The removable handle facilitates compact storage..
Material of Taper Reamers: high carbon steel heat treatment, longer service life.
Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13mm) size and 1/5" -5/8 "(5mm -16mm) size.

⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.

Shank diameter: 3,4,5,6,7,8,9,10mm, machining hole size and shape can be suitable for different componets.
Features: The sawing edge of the reamer set of the chuck machine is sharp, the sawing ability is strong, the precision is high, and the sawing is clean.
Easy to use: Straight shank machine reamers can be installed on drilling machines, milling machines, etc.
Application: The H8 reamer set can process the surface of metal materials such as iron, steel, plastic, wood, copper, aluminum, etc.
Durable: The reamer set is made of high-speed steel, with high hardness, good toughness and long service life.

Made of Stainless Steel and Rosewood, The tobacco pipe cleaner cleaning Tool has elegant and classic look , easy to use and very practical. Excellent....
3 in 1 Tamper, Reamer & Pick tool set, Prefect for cleaning & removing ash & other residue in the stem and shank as well as the bowl chamber..
Easy to use , durable, light weight and easy to carry. Weight: 1.25oz/35.44g..
Compact size,Portable, Overall Size: 3.31" (L) x 0.69" (W) x 0.25" (T)..
Package:1* (3 in 1)Tamper, Reamer & Pick tool set.