Reviews Tapered Flute Chucking Reamer Set

7-Piece HSS Chucking Reamer Set, 1/8 Inch - 1/2 Inch

Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.

Type- Straight Flute Chucking Reamer Bits.
Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.

Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.

Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
Size Infor: Length of chucking reamer is 6.5 inch.
Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.

Type- Straight Flute Chucking Reamer Bits.
Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.

⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.

Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.

Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.