Reviews Tapered Counterbore

DEWALT Drill Bit, #6 Countersink, 9/64-Inch (DW2537)

  • Drill, countersink and counterbore in one step.
  • Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.
  • Replacement tapered bits offered. Product consist of Drill Bit Only no tool holder.
Check Stock

uxcell Knurled Insert Nuts, M8 x 10mm(L) x 10mm(OD) Female Thread Brass Embedment Assortment Kit, 5 Pcs

  • [SIZE] - M8x1.25mm thread size, 0.39" (10mm) long, 0.39" 10mm outer diameter ,OD tolerance: +0.02"/0"..
  • [MATERIAL] - Made of brass, rust resistance, good thermal conductivity and heat resistance, can ensure long time using..
  • [FEATURE] - Can be installed by ultrasonic or heat into thread tapered hole, or in during injection..
  • [ADVANTAGE] - No need to counterbore or countersink the boss hole since the insert has guide pilot..
  • [APPLICATION] - Widely used on injection for fastening..
Check Stock

DKIBBITH Pcs M2 Countersink Drill Bit Set, 3in1 Wood Pilot Countersink Drill Bits Drilling #4#6#8#10#12 Screws Holes, with Adjustable Depth Stop, Quick Release Hex Shank, 2-Allen Wrench

  • Easier & Faster – 3 in1 Drill Countersink and Counterbore in one step, with this 7 Pcs M2 Countersink Set you can get perfect counterbored holes for #4 #6 #8 #10 #10 #12 #12 screws without changing bits.
  • Meet All the Needs – with popular 82 Degrees Countersink and 3/8” Counterbore Bits - You can either have the head of the screw below the surface then conceal it with matching wood plugs, or fit flush with the surface.
  • Cutting Depth Adjustable – You may need holes for long or short screws.
  • these counterbore Drill Bits with Adjustable Depth Stop to fit the length of your screws.
  • just tighten the pilot drill bit with the hex key (included) to the Countersink / Counterbore sleeve.
  • Fit Most Tools – 1/4" hex shank design compatible with most quick-change chuck machines or power drills.
  • Includes 7 pieces of Drill/Countersink/Counterbore 3in1 bits in sizes 5/64”, 3/32”, 7/64”, 1/8”, 1/8”, 9/64” 9/64”。.
  • For Hardwood & Softwood - The HSS M2 Grade countersink drill bit perform well in softwood or hardwood and serve the needs of most woodworkers.
Check Stock

PAGOW T Handle Taper Reamer, 5-16mm Tapered 6 Hand Held Fluted Chamfer Reaming, Repairman's Bridge Pin Hole Reamer Woodworker Cutting Tools

  • Material: Made of hardened ball bearing steel (#9027) with precision ground cutting edges..
  • Tapered Reamer Diameter:1/8"-1/2"(3-13mm).
  • T-Handle Grip: Provides greater leverage and easier reaming. Provides leverage for easier operation and rotation,saving effort. Removable handle for compact storage..
  • Perfect tool kit for every DIY users to enlarge holes in wood. Suitable for reaming taper holes on wooden boards,chamfering,deburring,easy to screw counterbore..
  • Precision machined cutting edges smooth metal surfaces with little effort. Useful tool for removing burrs from steel, brass, aluminum, plastic, wood and wallboard..
Check Stock

Keadic 120 Pcs M4x8mmx6mm Thread Brass Knurled Nuts Set, Female Threaded Insert Embedment Nuts, Threaded Knurled Heat Set for Printing 3D Printer and More Projects

  • ...rresponding screw, avoiding to slip. Smooth surface without any burr, standard circular, firm and uniform, easy to install..
  • 【Easy to Use】These threaded insert nuts can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. Since the insert has a guide, there is no need for a counterbore or countersink..
  • 【Practical Fastener& Wide Application】Perfect for the injection moulding for tightly fixing, heat into thread tapered hole and ultrasonic installation.
  • Widely applied in laptop plastic housings, 3D printers, automotive,electrical injection molding, and all kinds of plastic casings..
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools Premium Metric H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 509S-007M

  • High Speed Steel. Straight Shank. Metric Set(7 Pcs/Set): M3, M4, M5, M6, M8, M10, & M12.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Aibesy 7pcs/set Counterbore Set M3-M12 High-speed Steel 4 Flutes Straight Shank Counterbore End Mills

  • High speed steel, high quality and durable..
  • It includes 7 sizes in one counterbore set(M3, M4, M5, M6, M8, M10, M12)..
  • An essential hardware tool for industrial..
  • The counterbore set works great in counter bored hole..
  • Apply to cast iron, steel, copper, aluminum, conventional hardness of stainless steel and die steel, etc..
Check Stock

Litorange 360PCS M2 M2.5 M3 M4 Female Thread Knurled Nuts Brass Threaded Insert Embedment Nuts Assortment Kit,for Daily Repair 3D Printing Projects

  • ★ 【Sizes】Brass thread inserts kit includes 4 assorted of size that contains M2，M2.5，M3,M4.Come with a plastic box, each size be placed in a single grid, no mess and easy to find..
  • ★ 【Material】Made of high quality environmentally friendly brass material, high strength and hardness, strong tolerance, the force is evenly tightened, you can use it for a long time..
  • ★ 【Excellent Workmanship】 The embedment nut has a high-precision thread that is compatible with the corresponding screw and the insert has a guide so there is no need for a counterbore or countersink. Smooth surface with no burr, standard circular, firm and uniform, easy to install..
  • ★ 【Easy To Use】These Brass Threaded Insert Embedment Nuts can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection, the material of the nut is brass and it can resist heat..
  • ★ 【Wide Applications】Widely used in mobile phones, laptops, various plastic casings, communications, micro-motors, computers, electrical appliances, electronics, toys, watches, lighting, locomotives, etc, and it can be mounted into the taper hole by ultrasonic or heat, or molded during injection..
Check Stock