Reviews Tapered Ball Joint Bearings

Bailey Universal Joint Assemblies (Standard Series) - Universal Joint with Relubricable Bearings - Standard U Joint, 7/8’’ x 7/8’’ ID, 3/16’’ Keyway, 1000 RPM, 5” Overall Length, 2.5 lb, 133015

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 7/8’’ x 7/8’’ inner diameter, 3/16’’ keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.5 lb..
  • HIGH SPEED: Our robust Cardan joint can withstand a maximum torque of 800 lb-inches at a consistent speed of 1000 RPM. This universal joint assembly is best suited for high-speed, high torque operations..
  • TOUGH: With simple but precise construction, this U Joint from Bailey is capable of coupling laterally dissonant shafts. It reduces side thrust on bearing bushings, protecting them from damage even when subjected to long-term use..
  • FLEXIBLE: This standard rod ends ball joint allows up to 15% angular displacement at peak velocity. The universal ball rod assembly facilitates easy Up/Down movement of the drive shaft in automobile, industrial, and commercial applications..
  • MADE TO LAST: These universal joints have radical drop-forged slip yokes along with relubricable needle bearings. They are resistant to everyday wear and tear, have exceptional tolerance of high torques, and are built to go the mile..
Check Stock

Genuine Ford Fluid XG-8-A PTFE Lubricant - 1 lb.

  • GreaseCo HeavyDuty Grease Tub Cartridge is a Lithium Complex Red And Tacky Grease for use in High Temperature EP Applications.
  • Excellent Tractor Grease, Wheel Bearing Grease, Automotive Grease, Ball Joint Grease, Hitch Ball Grease, Axle Grease, Trailer Wheel Grease, Tie Rod Grease, Bushings, Bobcat Lube Points, Chassis Lubrication, Electric Motors, Gears, Plain Bearings, Presses, Roller Bearings, Steering Knuckles, Trailers, Universal Joints, Winches, And Many More!.
  • An All Purpose Grease Tube for Automotive, Construction, Mining, Hauling & Trucking Sectors Due To It’s Enhanced High Temperature And Extreme Pressure Properties.
Check Stock

Neewer Carbon Fiber Camera Track Slider Video Stabilizer Rail (80cm)

  • 6 U-shaped Ball Bearings: U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubes.
  • Flexible Uses: The track can be used on the ground or worked with tripod. It can be directly connected with camera, or indirectly connected with camera via ball head.
  • Multi-Angle Shooting: Available for vertical, horizontal and 45 degrees shooting by using the threaded holes in the slider.
  • Adjustable and Secured Legs: Height of legs could be adjusted from 8.5 centimeters to 10 centimeters.
  • Gear-shaped joint interface and locking knobs for better position locking for the legs.
  • Convenient Carrying Bag: Easy and carry, transport and store.
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, ¼” keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg)..
  • PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision..
  • HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease..
  • MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance..
  • MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series..
Check Stock

Neo Synthetics HP800 High Performance Wheel Bearing Grease, 1 Lb Tub

  • GreaseCo HeavyDuty Grease Cartridge is a Lithium Complex Red And Tacky Grease for use in High Temperature EP Applications.
  • Excellent Tractor Grease, Wheel Bearing Grease, Automotive Grease, Ball Joint Grease, Hitch Ball Grease, Axle Grease, Trailer Wheel Grease, Tie Rod Grease, Bushings, Bobcat Lube Points, Chassis Lubrication, Electric Motors, Gears, Plain Bearings, Presses, Roller Bearings, Steering Knuckles, Trailers, Universal Joints, Winches, And Many More!.
  • An All Purpose Grease Tube for Automotive, Construction, Mining, Hauling & Trucking Sectors Due To It’s Enhanced High Temperature And Extreme Pressure Properties.
  • Universal Fit: Works with Lock N' Lube, DEWALT, MILWAUKEE, Lincoln, Lucas, Ryobi, Bravex, GreaseTek, STEINBRÜCKE and Many More Manual and Automatic Grease Gun Brands!.
Check Stock

ARES 12016-15/16-inch Pickle Fork Ball Joint Separator - Tempered Drop Forged Steel Construction - 15/16-Inch Tapered Fork with Non-Slip Knurled Handle

  • SPECIFICATIONS: The ARES 15/16-inch ball joint separator is 11-7/8-inch long with a 15/16-inch tapered wedge fork opening, so you can easily replace worn out ball joints and even remove CV drive shafts on FWD vehicles..
  • DESIGN CONSIDERATIONS: Our 15/16-inch ball joint separator is constructed from tempered drop forged steel for enhanced durability and features a knurled handle to ensure a steady grip during use..
  • APPLICATIONS: This tool makes it easy to separate ball joints or even remove CV drive shafts on FWD vehicles. Just keep a grip on the knurled shaft and add extra force with a hammer as needed..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Ball Joint Separator, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of th....
Check Stock

Neiko 20687A Ball Joint Separator Tie Rod End Remover Pickle Fork Set | 5 Piece | Automotive Specialty Tool

  • [APPLICATION]: The ball joint separator is used for separating the ball joint from the spindle support arm on front wheel drive vehicles, both domestic and import..
  • [QUALITY]: This set comes with a one piece alloy steel construction that ensures durability and strength to withstand the heavy duty hammering force transferred to automotive attachments in your home garage or work..
  • [DESIGN]: The knurled handle creates a strong, tight, controlled, and well-placed grip when handling the separator on oil and greasy surfaces in automotive work and allows for precision and accuracy in its application..
  • [DURABLE]: The heat-treated tapered fork smoothly separates ball joints and slips in between the ball and housing, which makes it easy for maintenance tasks and automotive repairs on most car vehicles..
  • [VERSATILE]: The pickle fork tool in this automotive collection varies and comes in 5 sizes, making it usable for a variety of pitman arms, ball joints, and tie rods of automobiles including cars, trucks, and SUVs..
Check Stock

MJR Tumblers 20 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 20 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock