Reviews Taper Shank Screw Extractors

NEIKO 04204A Hex Head Multi-Spline Screw and Bolt Extractor Set | 25 Piece Easy Out Screw Extraction | Broken Bolt remover | 1/8” to 7/8” in 1/32” Increment | Cr-Mo | Stripped Fastener Tool

  • For helical coil wire screw thread insert taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

XEWEA 35-Pieces Screw & Bolt Extractor Set and Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/3....
Check Stock

Topec Spiral Screw Extractor Set, Stripped Screw Removal Tool for Easily Remove Broken Studs, Bolts, Damaged Screws, and Fittings, 7 Pieces

  • 【HIGH QUALITY】: Made from high-quality chrome molybdenum steel, our screw extractors are built to last. . Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, broken screws..
  • 【DIVERSIFIED LASERS SIZE】:Our extractor set includes 7 pieces, with 6 screw extractors ranging in size from 1#-5/64", 2#-7/64", 3#-5/32", 4#-1/4", 5#-17/64", 6#-13/32" and an additional spare size of 1#-5/64". With this set, you'll have the right tool for the job, no matter the size of the stripped or damaged screw or bolt you're working with..
  • 【Versatile Applications】: Our extractor set is designed to remove damaged or broken screws, bolts, and studs from a wide range of applications. Whether you're working on an automotive repair, home improvement project, or DIY woodworking project, our easy-out extractors are the perfect tool for the job..
  • 【User-Friendly】: Our screw extractor set is designed with the user in mind. The extractors are easy to use, Whether you're a professional mechanic or a DIY enthusiast, our bolt and screw....
Check Stock

BTSHUB 8pcs Damaged and Stripped Screw Extractor Set, Broken Bolt Extractor & Broken Water Pipe Remover Set

  • ☂FUNCTION: These extractors will easily and quickly remove most kinds of damaged, stripped, rusted, broken, or stuck screws, bolts from any wood or metal surface. The new two water pipe extractors, designed for the broken water pipes..
  • ☂RELIABLE QUALITY: Made from carbon steel and are tempered twice for extra hardness and durability. Black oxide finished for durability. It is rustproof and sturdy. Works on wood and machine screws, as well as flat, hex, or painted over screws..
  • ☂THREAD DESIGN: The damaged screw extractor is designed with deep and wide threads for longer service life. 8 screw extractor size includes #1 for 1/8″-5/32″.
  • ☂STORAGE CASE: The broken screw extractor set comes with a durable box to keep these extractors organized, clean, secure, and easy to find..
  • ☂SCREW REMOVING TOOL: 8-piece heavy-duty steel extractor，different sizes of screw extractor to meet different needs. The extractor set is an ideal screw removing tool for household use and professional electrician..
Check Stock

ACROTOL 26 Pieces Bolt Extractor Set, Spiral Screw Extractor Set and Drill Bits, Extraction Socket Set for Removing Damaged, Rusted, Rounded Bolts, Nuts and Screws

  • [Specifications] 26 PCS Screw&Bolt Extractors/Drill Bit Set includes 6 easy out style spiral flute extractors, 13 PCS bolt&nut extractors, 1 PC 1/4" hex adapter and 6 PCS drill bits..
  • [Size] Nut&Bolt Extractor Size: 1/4inch, 5/16inch (8mm), 3/8 inch, 10mm, 7/16 inch (11mm), 12mm, 1/2inch, 13mm, 9/16inch (14mm), 5/8 inch (16mm), 17mm, 11/16 inch, 3/4 inch (19mm), included 3/8"-1/4" hex adapter. Spiral Flute Extractors Size: 1#, 2#, 3#, 4#, 5#, 6#. Drill Bits Size: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8"..
  • [Material] Every screw & bolt extractor is made from high hardness chrome-molybdenum steel, the cobalt drill bit is made from HHS..
  • [Note] Cobalt drill bits should not used for stainless steel. The bolt extractor with unique plum-shaped internal thread design provides excellent torque and can be used to rotate fasteners with deep bolts..
  • [Function] Spiral flute extractors are perfect for common fasteners, the bolt extractors are for freeing partly-exposed fasteners. The kit also includes right hand cobalt drill bits for fasteners, which can be used to help drill these fasteners..
Check Stock

Damaged Screw Extractor Set, 12Pcs Screw Extractor Kit, Easy Out Bolt Extractor Set and Drill Bits Guide Set for for Broken Bolts Removing Hand Tools, 4-25mm(1/8-1") Broken Screws

  • Damaged Screw Extractor: These extractors kit will remove most kinds of damaged, rusted, broken or stuck screws from any wood or metal surface. The easy-to-remove extractor set is made from premium steel, high temperature quenching, surface anti-rust treatment, strong and durable. Easily remove damaged or broken screws, bolts, studs, threaded pipe fittings and so on..
Check Stock

AKM Screw Extractor with Drill Bit Set,bolt extractors,Multi-spline Extractors,and Left Hand Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings| SAE

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our AKM screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16",....
Check Stock

Gunsmithing At Home For Beginners And Novices

  • 49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....
Check Stock

10Pcs Screw Extractor and Left Hand Drill Bits Set, Bolt Remover Reverse Cobalt HSS Steel Drill Bit for Remove Stripped Screws and Broken Bolts

  • ...sign can not only increase the working length of the cutting edge, but also reduce the thickness of the cutting layer, which making the cutting effect better and without damaging other working areas..
  • Multi-Purpose: Simple drill extractor is multipurpose on your life. Bolt extractors that remove broken screws, whether working on wood or metal, are ideal for construction, automotive, home DIY projects or for industrial use.These extractors are excellent if you are working in a production environment and using screw head bolts..
  • High and Durable Material: The left hand drills are made from cobalt fortified HSS material, which increases durability and service life.This screw extractor has strong wear resistance and clear chip removal. HSS is harder, tougher and easier to drill, turn and remove damaged screw or bolts than other materials..
  • Multiple Sizes: 5pcs HSS left hand drill bits and 5 alloy steel bolt extractor. Screw extractors include 1#, 2#, 3#, 4#, 5#. Left hand drill models include 1/8", 5/32", 3/16", 1/4", 19/64".With a portable storage case that provides excellent protection and against los....
Check Stock

Thinkpro 26Pcs Bolt Extractor Set and Drill Bit Kit, Multi-Spline Screw Extractors, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws

  • ... screw & bolt extractor sets and drill bit kits.Package including: 13PCS Nut Remover Set: 1/4″, 5/16″(8mm), 3/8”, 10mm, 7/16”(11mm), 12mm, 1/2”, 13mm, 9/16”(14mm), 5/8”(16mm), 17mm, 11/16”, 3/4”(19mm).
  • 6PCS HSS Cobalt Drill Bits: 3/8″, 9/32″, 1/4″, 5/32″, 1/8″, 3/32″.
  • 6PCS Spiral Screw Extractors: #1, #2, #3, #4, #5, #6.
  • 1PCS 3/8″-1/4″ Hex Adapter. Multiple specifications and sizes to meet your various work needs..
  • Solid Construction: The Screw remover kit parts are precisely machined, and made of high-hardness chrome-molybdenum steel. Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, and broken screws. The drill bits is made of HHS and the head is designed with a 135° angle. which is not easily worn and has strong penetration. Surface titanium nitride coating, effective anti-corrosion and rust prevention, extending service life..
  • Reverse Spiral Screw Extractors：Reverse spiral cutting cone extractors are designed to be driven into the head of a damaged bolt if its head is no longer usable and a wrench doesn’t “bite” it. The inside edges of the extractors are designed to “cut” into the damaged bolt’s head to allow it to rotate and ultimately extr....
Check Stock