Reviews Taper Punch Set

TuffMan Tools Roll Pin Punch Set & 1.5 lb Dead Blow Hammer, Great for Handymen & Watchmakers, Use to Remove Pins on Cars & Boats

  • ...expect a lot from my tools. Even the 1/8" punch is very rigid and sturdy. They are definitely higher quality than I expected at this price!”.
  • ✔️ A MANLY-MAN’S ROLL PIN PUNCH SET. Don’t waste your time with weak sauce tools that do more harm than good. We make our tools tough and with precision. The reverse taper tips prevent slipping, scratching, and causing damage to your machinery. We don’t mess around with our Tuffman Roll Pin Punch Set..
  • ✔️ GET THE JOB DONE RIGHT, THE FIRST TIME… We know your time, energy, and creativity are valuable, and we promise that our tools will increase the efficiency of your projects. If you are not 100% satisfied with the performance of our tools, we will give you a full refund, no questions asked. Order yours now, risk-free, and experience the “Tuffman Difference.”.
Check Stock

Amazon Basics 16-Piece Chrome Vanadium Steel Punch and Chisel Set with Storage Pouch

  • 16-piece woodworking punch and chisel set includes 3 cold chisels, 5 taper punches, 5 pin punches, 2 center punches, and 1 chisel punch gauge.
  • Heat treated, chrome vanadium (Cr-V) alloy steel construction.
  • Comfortable handles reduce hand strain and improve accuracy.
  • Storage pouch with velcro closure keeps tools organized and secured.
Check Stock

Punch And Chisel Set, 16 Pieces- Includes Taper Punches, Cold Chisels, Pin Punches, Center Punches, Chisel Gauge, and Storage Case- By Stalwart

  • ... EASY TO STORE AND CARRY- The cloth roll up carry and storage pouch will keep your chisel and punch set safe, secure, and organized until your next use. The carry case also makes for easy transport and storage of the tools..
  • SET INCLUDES-  The 16-piece set consists of 5 taper punches.
  • 3/32”x5 1/4”, 1/8”x 5 ¾”, 5/32”x6”, 3/16”x 6 ¼”, 1/4”x 6 ¾”. 3 Cold chisels: 3/8”x 5 ½”, 1/2”x 6”, 5/8”x 6 ½”. 5 Pin punches.
  • 3/32”x 4 ¼”, 1/8”x 4 ¾”, 5/32”x 5”, 3/16”x 5 ¼”, ¼”x 5 ¾”. 2 Center punches.
  • 1/8”x5”, 3/16”x 6” and 1 chisel gauge. Hardness 54~58 HRC..
  • SATISFACTION – Stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. NOTE: This is an exclusive product of Stalwart and ONLY Chisel and Punch Sets by Stalwart are to be genuine.
Check Stock

Wheeler Gas Block Taper Pin Removal Tool for Tactical Sporting Rifles Gunsmithing, Cleaning, Rebuild and Maintenance

  • SPECS: Compatible with A2 front sights, dual taper pins, and Smith and Wesson single-taper pin gas blocks.
  • INCLUDES: Finishing punch and starter punch.
  • DESIGN: Constructed from durable tool steel for longevity.
  • GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler. Please contact Wheeler customer service for assistance.
Check Stock

GEARWRENCH 27 Pc Punch and Chisel Set - 82306

  • Chisel For Cutting Rivets, Bolts, and Nuts.
  • Pin Punch For Final Removal To Drive Out Pins and Rivets.
  • Center Punch For Marking Center Lines and Pilot Drill Locations.
  • Long Taper Punch To Install and Remove Pins and Shafts and To Align Holes.
  • Starter Punch For Both Starting and Installing Pins and Rivets.
Check Stock

General Tools 1271M Arch Punch, 1 Inch

  • The General Tools and Instruments 1271M Arch Punch is the ideal punch tool for punching a 1 inch hole.
  • The punch works on leather, rubber, canvas, plastic, sheet metal, gasket material, cardboard and softer metals.
  • The internal punch features an inside taper for clearance.
  • The punches are heat treated forged steel, ensuring long lasting performance.
  • Because of this heat treatment, the cutting edge will stay sharper longer.
Check Stock

Astro Pneumatic Tool 1600 16-Piece Punch and Chisel Set

  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch.
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch.
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch.
Check Stock

Rennsteig 9-Piece Arch Punch/Wad Punch Set in roll-up pouch

  • Drop forged in one piece from the finest carbon Steel, bringing you a clean, precise punch.
  • Inside taper permits punching's to clear easily through the barrel.
  • Fully-polished barrel and black japanned handle.
Check Stock

Allpax AX1818 Arch Punch, 1-5/16-Inch

  • Osborne Arch Punches are forged in one piece from the finest special carbon steel in sizes from 1/8" to 2-1/4" diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne Arch Punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. There is no ot.
Check Stock

Amazon Brand - Denali 14-Piece Drill and Tap Combo Set

  • ideal for quick, easy thread cutting and hole making.
  • Includes a 14 piece set with 1/8-27NPT Pipe, 6-32 Taper, 8-32 Taper, 10-24 Taper, 10-32 Taper, 12-24 Taper, 1/4 - 20NC, Taper 1/4 - 28NF Taper, 5/16 - 18NC Taper, 5/16 24 NF Taper, 3/8 - 16 NC Plug, 3/8 - 24 NF Plug, 7/16 -14NC Plug and 1/2 -13NC Plug, 1-case.
  • Hardened, precision ground and polished surfaces with a rust resistant satin finish ensure long lasting strength.
  • Product dimensions: 5.12x2.95x0.83 inches(LxWxH, Carry Case).
  • This product is covered by the Accessories 1-Year Limited Warranty.
Check Stock