Reviews Synchronous Machine

Befenybay 2Kit 2GT Synchronous Wheel 20&60 Teeth 8mm Bore Aluminum Timing Pulley with 2pcs Length 200mm Width 10mm Belt (20-60T-8B-10)

  • 【Material】Aluminum Alloy, Surface oxidation treatment.
  • 【Widely Used】Widely used for milling machine, gear shaper, drilling machine, hobbing machine or other machinery transmission occasions.
  • 【Install】Easy to assemble and disassemble.
  • 【Package Include】2pcs 2GT 60 Teeth Synchronous Wheel, 2pcs 2GT 20 Teeth Synchronous Wheel, 2pcs Length 200mm Width 10mm Belt , 4pcs M4 screws, 1pcs Allen-Key.
Check Stock

Terre Products - V-Groove/V-Belt Drive Pulley, 6'' Outside Diameter, 5/8\ Bore, Die Cast, Z3A Zinc Alloy, Compatible Replacement for Chicago Die Cast 600A

  • 【Material】 Aluminum Alloy, Surface oxidation treatment.
  • 【Widely Used】Widely used for milling machine, gear shaper, drilling machine, hobbing machine or other machinery transmission occasions.
  • 【Install】Easy to assemble and disassemble.
  • 【Package Include】2pcs 2GT 60 Teeth Synchronous Wheel, 2pcs 2GT 20 Teeth Synchronous Wheel, 2pcs Length 200mm Width 6mm Belt , 4pcs M4 screws, 1pcs Allen Key.
Check Stock

Twidec/2Pcs Synchronous Motor AC100~127V 50/60HZ Turntable Synchron Motor 4W CW/CCW Electric Motor 2.5-3RPM/MIN TYC-50-2.502

  • Turntable Synchronous Motor Power: 4 watts.
  • Size: motor is 2 inch/ 4.9 cm in diameter, 1.5 inch/ 3.8 cm in height.
  • Cable is 0.08 inch/ 2 mm in diameter, 15.7 inch/ 40 cm in length.
  • Characteristics：The synchron motor has small power consumption and large torque which is convenient to use.
  • Applications: the synchronous motors are good tool for hand-made, school project.
  • Suitable for home appliance, heater machine, electric fan, Christmas....
Check Stock

Red Lion Controls/N-Tron PAXDP000 Pax Dual Process Input Meter, Red Display, AC Powered

  • This unit measures AC/DC voltage and current, resistance, capacitance, frequency, transistor hFE and temperature.
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform.
  • Large LCD, High contrast, Wide visual angle LCD display, white backlight.
  • Dual-display: Main display 80000, Vice-display 80000, analog bar 23 segments.
  • 50 kinds of measuring function, with basicly DCV, ACV, DCA, ACA, W(Omega), CAP, Hz, TEMP, diode and continuity measuring function.
  • Standard function generator: 18 kinds of frequency, 1%-99% Duty cycle, 1800 pcs wave output.
  • Single analyzed: (AC+DC) measuring synchronous, (AC+Hz) measuring synchronous, (DC+dBm) measuring synchronous, (dBm+Hz) measuring synchronous, (Hz+Duty) measuring synchronous displaying synchronous.
  • AC measuring adopt High accuracy RMS, Widely measuring and AC+DC function, can measuring the accuracy virtual value of AC by any wave.
Check Stock

AUTOTOOLHOME 6-12V Mini DC Motor High Torque Gear for Traxxas R/C and Power Wheels PCB DIY Electric Drill

  • 【Description:】This is a 50KTYZ 110V CW/CCW synchronous motor, this motor is a high torque motor,can work for a longt time. Low noise and more robust. This synchronous motor is stable, durable, and compatible. We promise we will tested ever motor before shipment..
  • 【Specification:】 Shaft Diameter: 7mm ； Shaft Length: 14.5mm ； Working Voltage: AC 110V ； Speed: 30-36RPM ； Frequency: ~50/60Hz ； Power: 6W ； Capacitor: 0.56uF ； Tourque: ≤2.5Kgf.cm； Rotation: CW/CCW (controllable)；.
  • 【Application:】An good motor for household, hand-made, school project, model, light, AD and anything you want. Mainly used in instrument, automation, gluing machine, stage lamps and advertising display equipment, curtain automatic control, automatic voltage regulator, electric image, etc..
  • 【Attention:】 1.When the motor is running, it will hot, please do not touch it, It is normal that the motor becomes hot during motor working (the surface temperature may reach to 80-90℃ ). It does not affect the use, please do not worry. 2.Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you can contact us. Welcome to bulk purchase and OEM orders!.
  • 【Package:】1 x Synchronous Motor, ....
Check Stock

BZ 3D GT2 Pulley 60 Teeth Bore 8/5mm 60T Timing Pulley Synchronous Wheel Aluminum for Width 6mm 3D Printer Parts (Pack of 4pcs) (60Teeth Bore 8mm)

  • 【High Quality Material】- Timing belt gear is made of aluminum alloy, sturdy and durable,surface oxidation treatment, anti-rust and anti-corrosion effectively.Deburring is carried out at the threaded hole, which is not easy to wear the synchronous belt, also can increase the service life of the synchronous belt..
  • 【Feature】- Timing Pulley contact with the tooth side which minimizes the risk of the belt slipping.Accurate tooth surface of inner hole, less runout and more stable..
  • 【Application】- The XL size aluminum pulley wheel is suitable for general torque transmission design and high speed transmission design. Timing Pulley is widely used in milling machine, CNC engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions..
  • 【Package Contents】- 1Pcs x Timing Pulley..
Check Stock

6PCS Turntable motor Synchronous Synchron Motor 50/60Hz AC 100~127V CCW/CW 4W 5-6RPM/MIN CCW/CW with 7mm Flexible Coupling Connector For Cup Turner,Hand-Made, School Project, Model (5-6RPM)

  • Model Name:6 Pieces Synchronous Synchron Motor Turntable Motor Electric Cuptisserie Motor Cup Turner Motor Power: 4 watts.
  • Size: motor is 1.9 inch/ 4.8 cm in diameter, 1.57 inch/ 4 cm in height.
  • Cable is 0.08 inch/ 2 mm in diameter, 15.7 inch/ 40 cm in length.
  • Efficient synchronous motor: small power consumption and large torque.
  • Simple to use: low noise and easy to install.
  • Please note that add suitable road of the synchron motor, if overroad, please cut off the power from working to protect the motor.
  • Wide uses: good electric synchron motor for hand-made, school project, model such as heater machine, air conditioner, electric fan, Christmas tree, dynamic visualizer, popcorn machine, arts and crafts lighting, etc..
Check Stock

6PCS Turntable motor Synchronous Synchron Motor 50/60Hz AC 100~127V CCW/CW 4W 2.5-3RPM/MIN CCW/CW with 7mm Flexible Coupling Connector For Cup Turner,Hand-Made, School Project, Model (2.5-3RPM)

  • Model Name:6 Pieces Synchronous Synchron Motor Turntable Motor Electric Cuptisserie Motor Cup Turner Motor Power: 4 watts.
  • Size: motor is 1.9 inch/ 4.8 cm in diameter, 1.57 inch/ 4 cm in height.
  • Cable is 0.08 inch/ 2 mm in diameter, 15.7 inch/ 40 cm in length.
  • Efficient synchronous motor: small power consumption and large torque.
  • Simple to use: low noise and easy to install.
  • Please note that add suitable road of the synchron motor, if overroad, please cut off the power from working to protect the motor.
  • Wide uses: good electric synchron motor for hand-made, school project, model such as heater machine, air conditioner, electric fan, Christmas tree, dynamic visualizer, popcorn machine, arts and crafts lighting, etc..
Check Stock

2PCS Cup Turner Motor Synchronous Synchron Motor 50/60Hz AC 100~127V CCW/CW 4W with 7mm Flexible Coupling Connector and 6ft Power Cord Switch Plug For Hand-Made School Project Model 5-6R

  • Model Name:2 Pieces Cup Turner Motor Synchronous Synchron Motor Turntable Motor Electric Cup turner Motor Cuptisserie Motor Cup Turner Motor Power: 4....
  • Size: motor is 1.9 inch/ 4.8 cm in diameter, 1.57 inch/ 4 cm in height.
  • Cable is 0.08 inch/ 2 mm in diameter, 15.7 inch/ 40 cm in length.
  • Efficient synchronous motor: small power consumption and large torque.
  • Simple to use: low noise and easy to install.
  • Please note that add suitable road of the synchron motor, if overroad, please cut off the power from....
  • Wide uses: good electric synchron motor for hand-made, school project, model such as heater machine, air conditioner, electric fan, Christmas tree,....
Check Stock

UV Flatbed Printer with 3D Textured Raised Embossed for Glass/Plastic/Leather/PVC/Metal/Phone case

  • 【Ultra-fine and Powerful Laser Technology】 Makeblock xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/....
  • 【Higher Accuracy cutter and engraver machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and....
  • 【Cylinder Engraving & Larger Engraving Area】xTool D1 laser engraving machine can engrave huge diameter cylinders with a rotary attachment.....
  • 【Wide Compatibility and Multiple Connection Ways】xTool D1 portable laser engraver can be compatible with LightBurn and our beginner-friendly....
  • 【Simple to Use and Excellent Quality】The entire engraving machine has a modular design of aluminum alloy and can typically be assembled in 10-20....
Check Stock