Reviews Swivel Tip Welding Clamps

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

  • ...R PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
  • This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
  • 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
  • 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
  • 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
  • BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
  • Hex key adjustment screw for adjusting to the correct pressure.
  • Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
  • Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
  • Each wood working clamp comes lightly pre-oiled fo....
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

MAXPOWER Heavy Duty Locking C-Clamp Set 6-Inch, 9-Inch,11-Inch, 3-Piece Locking Pliers Nickel Plated C Pliers With Regular Tip and Swivel Pads

  • WELDING GRIP CLAMPS – 6-inch C Locking Clamp with regular tips, 9-inch Locking C Plier w/ swivel pad and 11-inch Locking C Plier with regular tips.
  • LONG-TERM RELIABILITY – Made from nickel plated alloy steel to withstand corrosive working environment.
  • ADJUSTABLE LOCKING MECHANISM - Screw adjustable locks with trigger release.
  • SWIVEL PADS - Clamp wood joints and auto body panels while avoid damaging.
Check Stock

IRWIN VISE-GRIP Locking Pliers, Welding Clamp, 9-Inch (25ZR) (Pack of 4)

  • LOCKING C-CLAMP SET: A 3 piece set of imperial C-clamps with precision screw adjustable locks and trigger releases in the most convenient sizes you’ll ever need – 1 x 6” fixed pad, 1 x 6” swivel pad and 1 x 11” swivel pad..
  • COMMERCIAL GRADE CHROME VANADIUM STEEL: Our C-clamps are drop-forged from chrome vanadium steel with nickel plated finish to withstand long-term corrosion for real durability. That’s made to last the distance..
  • BUILT TO LAST: Whether you’re a professional mechanic or a handyman looking to complete your tool kit, you need a set of these premium quality C plier set in your kit. Work great as welding clamps too..
  • ROLL-UP POUCH: We’ve included a handy numbered nylon pouch for your clamp set. It rolls up for easy storage or transportation, and can also be hung up for quick access. A bright orange internal lining finishes off this sturdy clamp organizer for easy visibility..
  • SATISFACTION GUARANTEED: At Kendo tools we stand by the quality construction and durability of all our products. We are fully committed to customer satisfaction with a lifetime warranty against any manufacturer defects..
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

The Weekend Brewer Ball Lock Cornelius Keg Pigtails by

  • MUST HAVE for all cornelius keg owners. Allows for injecting CO2 in and dispensing beer out of standard ball lock kegs..
  • 5FT OF GAS TUBING allows for your CO2 tank to be placed in a convenient position. Competitor products make you compromise with only 3ft..
  • EASY CLEANING by removing the MFL disconnect and running water through the tubing. Most competitor products use barb disconnects with pex clamps which is extremely difficult to clean..
  • WORKS WITH ALL STANDARD REGULATORS. Includes swivel nut for mfl regulators. Remove swivel nut for barb regulators..
  • Upgrade your current regulator to our ultimate regulator that works with 5 types of CO2 tanks.
  • including paintball, sodastream, CO2 cartridges, and standard welding tanks. Search B071ZNP5BS to learn more..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

MAXPOWER 3PCS Water Pump Pliers and Locking C-clamp 11 inch 9 inch 6 inch

  • WELDING GRIP CLAMPS – 6-inch C Locking Clamp with regular tips, 9-inch Locking C Plier w/ swivel pad and 11-inch Locking C Plier with regular tips.
  • ADJUSTABLE LOCKING MECHANISM - Screw adjustable locks with trigger release.
  • SWIVEL PADS - Clamp wood joints and auto body panels while avoid damaging.
  • Plumbing Pliers Sizes and Opening Capatities: 1-3/16 inch (30mm) for 7-inch model, 1-1/2 inch (38mm) for 10-inch model, 3-3/4 inch (95mm) for 16-inch model.
  • Fast Adjustment Directly on the Work Piece, Just Position the Upper Jaw to the Work Piece , Push Button and Move Close the Lower Jaw.
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • ...RABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock