Reviews Surface Primer

POR-15 Self Etch Primer Spray - Gray - 15 Fl. Oz. - Adheres to Metal & Painted Surfaces | Quick Drying | Easy Application

  • ✅ POR-15 SELF ETCH PRIMER - Is formulated to dry quickly and promote adhesion for the coming layers. Proven to bond incredibly well to all top coats. For a superior layer of protection against rust, apply POR-15 Rust prevention coating following self etch primer spray..
  • ✅ APPLICATION - All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint and any other matter. Shake well before spraying. Spray two light coats of and allow 10 to 15 minutes between coats. Our Self Etch Primer can be topcoated in 30 minutes..
  • ✅ INCREDIBLE BOND - Our Self Etch Primer is NOT a high-build primer, but it can be sprayed on almost any painted surface and can be top coated in 20 - 30 minutes. It bonds incredibly well to POR-15 Rust Preventive Coating, and all topcoats bond incredibly well to POR-15 Self Etch Primer. It can be sanded lightly, and if desired, multiple coats may be applied..
  • ✅ WHEN DO I NEED THIS? – The etching creates a rougher surface for your topcoat to cling to, much like sanding would accomplish. It adheres well to steel, aluminum, stainless steel, brass, and other primed and painted surfaces. POR-15 Self Etch Primer will help maintain the overall look of your surface while preventing future rust and corrosio....
Check Stock

Evercoat Dura Build Acrylic Primer Surfacer for Body Filler, Putty, Fiberglass and More - 128 Fl Oz

  • Convenient Primer: Easily fills grind marks, sand scratches, and other minor surface imperfections.
  • Easily Applicable Primer: Use a primer gun with a 1.4 to 1.8 fluid nozzle or air cap.
  • Easy Sanding: Use 80, 180, 220 & 320 grit sandpaper on an orbital sander, depending on the surface.
  • Versatile Surfaces Application: Our products are applicable on steel, aluminum, fiberglass, and more.
  • Automotive Body Repair: We provide high-quality putty, primer, and body filler formulations.
Check Stock

Smashbox Photo Finish Oil Primer, 1 Ounce, Multi

  • 1.0-fluid ounces of Neutrogena Shine Control Matte Booster Face Primer & Serum with rice protein to absorb excess oil and leave a mattified finish on skin.
  • Wear this nourishing facial primer before applying makeup to help prep skin and create a smooth, matte surface for makeup application.
  • Can also be used alone as a mattifying serum to help leave skin shine-free while looking and feeling healthier.
  • Formulated with rice protein, which acts like a sponge to absorb excess oil, so skin stays shine-free and fresh-looking.
  • Skin-boosting serum to primer hybrid helps to bridge the gap between skincare and makeup with versatile two-in-one benefits.
  • Enhance your skin with the nourishing touch of the two-in-one Neutrogena Shine Control Matte Face Primer & Serum. This face serum and primer hybrid comes infused with rice protein, which can help absorb excess oil to reduce shine. This serum-to-primer provides a mattified finish and a smooth surface that preps skin for makeup application. You can also use the face priming serum on its own for its shine control effects. Enjoy the dual benefits of this two-in-one hybrid and bridge the gap between skincare and makeup..
Check Stock

Karlash Professional Nail Primer Bond Non Acid & Non Burn 0.5 oz Help Adhere Natural Nails

  • PREVENT LIFTING: When used together Karlash high-quality products will prevent lifting and provide nails with the etch to help adhere to the natural nail bed surface..
  • KARLASH MAX BOND IS COMPATIBLE with all gel nail, acrylic powder and liquid system, as well as any artificial nail art..
  • IMPORTANCE OF NAIL PREP AND BONDER/PRIMER: The biggest difference between a nail dehydrator and a nail primer, is that a nail primer can be used as a base coat to your manicure. A nail dehydrator is placed on your natural nail before anything else and creates a surface that nail polish and acrylic nails can easily bind to, after that is when a nail primer is put on.
  • Max Bond Info: Nail Primer is one of the most important substances that has an effect on longevity, of gel, gel polish and acrylic nail design..
Check Stock

KILZ Adhesion Primer, Interior/Exterior, 1 Gallon

  • A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray..
  • KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Viscosity - 93 - 100 KU. Roller - Smooth Surface - 3/8 - 1/2 inch nap.Roller - Porous Surface - 1/2 - 3/4 inch nap. Spray Pressure - 2,500 - 3,200. Spray Tip -.015 - .021 inches.
  • Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint..
  • Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour..
  • This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square f....
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Majic Paints 8-0101-1 Town & Country Exterior Latex Primer, 1-Gallon, Red

  • Great foundation for latex, acrylic or oil/alkyd exterior house paints, apply primer to surface you intend to paint prior to finish coating.
  • Provides the important first-step for a long lasting paint system that is blister and peel resistant.
  • Superior Coverage up to 500 Sq Ft per Gallon plus Dries bug-free in 30 minutes.
  • Excellent primer for exterior wood, masonry, brick and clean metal.
  • Weather-Resistant Latex Primer Paint for all Latex, Acrylic and Alkyd House Paints.
  • For best results prepare surface properly and time work so that you can stop painting at least 4-hours before nightfall. Not for use on roofs or floors.
Check Stock

The Ordinary High-Adherence Silicone Primer 30ml

  • ...hile energizing the skin for lasting makeup wear..
  • EASY TO USE CHEMICAL-FREE MAKEUP PRIMER: This face primer under foundation does not contain paraben, mineral oils, acrylamide, talc, and animal ingredients, making it perfect for any skin type. Pump to dispense a small amount and apply a thin layer across the entire surface of your face, and massage..
Check Stock

L R Liquid Rubber EPDM Rubber and RV Roof Primer - Weatherseal Camper and Trailer Roofing Coating 1 Gallon

  • WHY EPDM PRIMER - EPDM Primer is a rubber polymer water-based roofing primer, designed for adhesion bonding on EPDM surfaces..
  • RV ROOFING MAINTENANCE - Weatherproof RV roofs and other EPDM rubber surfaces by first applying this EPDM Primer before applying the actual waterproof sealant or seam tape.
  • EASY TO APPLY - Apply using a conventional brush or roller equipment.
  • may also be sprayed using a delivery system and nozzles appropriate for this material.
  • APPLICATION - All surfaces should be clean, dry, and free of contaminants that may result in a surface that is uneven or not sound.
  • FOR A BULLETPROOF SYSTEM - Liquid Rubber RV Smart Cleaner before Primer application.
  • EPDM Primer improves adhesion for Seam Tape and other Liquid Rubber RV Roof Coating.
Check Stock

Oatey 30246 PVC Regular Cement and 4-Ounce NSF Purple Primer Handy Pack

  • ALL-PURPOSE CEMENT AND PURPLE PRIMER HANDY PACK: Includes one 4 oz. can of all-purpose clear cement and one 4 oz. can of purple primer for PVC pipe....
  • REGULAR CLEAR CEMENT: Recommended for potable water, pressure pipe, conduit, and DWV applications, and it flows freely and sets up quickly at the....
  • INDUSTRIAL-GRADE PURPLE PRIMER: Recommended for use on CPVC/PVC pipe and fittings of all schedules and diameters, and it is for use in areas where....
  • AGGRESSIVE PRIMING: Formulated to remove surface dirt, grease, and grime as well as soften the pipe surface to allow for a fast, secure, and permanent....
  • COMPLIANCE: Both the cement and primer are certified to UL Greenguard Gold, NSF and UPC approved, exceed ASTM Standard D2564 and ASTM F 656, and....
Check Stock