Reviews Sump Pump Foot Valve

B BURCAM QUALITY PUMPS SINCE 1978 300400ZN Emergency Water Powered Back-up Sump Pump

  • BACK-UP SUMP PUMP: Emergency water back-up system that operates without a battery or power to protect your home from flooding in case of power failure or pump failure..
  • EMERGENCY PUMP: It does not require electricity or a battery to function, but is powered by your municipal water supply. It is easily connected to the municipal water supply line and to your existing conventional sump pump discharge line..
  • EASY INSTALLATION: No electricity, no battery, no maintenance required..
  • POWER OUTAGE PEACE OF MIND: In the event of a power outage or an electric pump failure, the rising water in the sump will activate an automatic control valve which will start the system. Water under pressure will flow through the Contractor Sump Buddy which creates a vacuum and causes the water in the sump to be drawn out into the discharge line..
  • HEAVY DUTY BRASS CONSTRUCTION: The pump and valve are made of brass for strength and longevity..
  • PUMP PERFORMANCE: The maximum lift is 15 feet and the moves up to 1200 GPH..
Check Stock

Liberty Pumps CSP-237 Pump one-size Gray

  • 16.5" x 15" poly sump pit (perforated) and poly cover.
  • Automatic sump pump, 115 V, with 10' power cord.
  • 24' flexible hose kit, polyethylene 1-1/4" (Model DHK-24).
  • Check valve threads directly into pump discharge.
Check Stock

JACKEL 1/2 HP Pre-Plumbed Sump Pump System (Model: JPACK22S-250V)

  • 1/2 HP Sump Pump w Stainless Steel Housing, Cast Iron Volute, SJE-Rhombus Vertical Switch, Piggyback Plug.
  • Polyethylene Structural Foam Sump Basin ( 18 x 24 in. / 22 Gal. Capacity ).
  • Polyethylene Structural Foam Sump Basin Cover ( 1.5 in. Threaded Discharge Flange, 2 in. Threaded Vent Flange, 2-Hole Cord Grommet, Clear View Removable Inspection Plate and DrainTrap ).
  • 1.5 in. / 1.25 in. Check Valve and 4 in. Inlet Hub.
Check Stock

PumpSpy Dual Pump Install Kit - Double Sump Pump Connection, Basement Water Pump Backup Y-Connector - Sump Pump Submersible Backup Connector To Single Discharge Line - Dual Pump System To 1-1/2' Line

  • ...h this dual pump backup installer kit. Everything you need to connect a back up sump pump is in the box. There’s no need to purchase a PVC pipe, elbows, couplings and cement. Say goodbye to messy, laborious installations!.
  • WHAT’S IN THE BOX: This kit contains a Y-Connector, Two (2) 1-1/2″ Threaded Silent Check Valves, Stainless Steel Clamps and Buna-N Rubber Couplings. The only thing you’ll need to put everything together is a standard screwdriver. This kit is compatible with all pumps that have a standard 1-1/2″ NPT pump discharge/output..
  • HOW TO INSTALL: Simply screw the check valves into both pumps, drop the Y-connector into the check valve boots, attach the rubber boot to the top of the Y-connector and then to your existing discharge line. Tighten all the stainless steel clamps with a screwdriver and you’re done. It’s that easy!.
Check Stock

Acouto Shower Sump Pump 12V,Shower Sump Pump System Boat RV Bilge 12V 750GPH Marine Multi Port Drain Box

  • The pump has a built‑in switch, which can automatically control according to the water level, no external float switch is required..
  • Shower Sump Pump 12V,Transparent snap‑on cover with gasket seal and removable mesh filter for easy cleaning..
  • This shower sump pump systerm has multiple sizes of port connector, easy to operate..
  • Boat Shower Pumps,Built‑in check valve, which can prevent dirty water backflow to the bathtub and cabin..
  • With ignition protection function, no need to worry about the unsecure factors when you start it..
Check Stock

Water Pump Submersible Pump DC 12V Sump Pump 1500 GPH Utility Pump With Switch-Black

  • ★【The Specifications of This Submersible Pump】 Volts:12V DC. Rated Current:13.5 A. Max. Flow: 1500 GPH. Max. Head: 25 Feet. Rotate speed:6000....
  • ★This Submersible Pump use with most 12-volt battery (battery not included), 20-foot battery cord with on/off switch, and battery alligator clips..
  • ★This Sump Pump has a very good structure design, and it uses tough thermoplastic materials and a high-quality DC motor and other accessories, its....
  • ★This Sump Pump is great for clean or dirty water. The multiple applications include home, outdoors, basement, yards, pools, flat roofs, window....
  • ★This Water Pump has a one-year warranty（Attention: Defects due to improper use of the pump are not within the warranty) and NOTE: It is....
Check Stock

Red Lion 599304 Sump Pump Discharge Hose Kit, 24-Feet

  • Compatible with sump pumps with 1-1/4 inch FNPT or 1-1/2 FNPT discharge. Not compatible with garden hose fittings..
  • Includes 24-foot corrugated polyethylene hose, ABS thread x barbed adapter and galvanized steel clamp.
  • Ideal for discharging water out of basement sump to a safe location outside of the home.
  • Can be attached to pump for emergency applications.
Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Sump Pump M95

  • Includes: Model 53 115-volt pump, Model 508 Aqua not, 115 Volt DC backup system with pump, check valve, float switch and piping.
  • Comes fully assembled and ready to install in your clear water sump.
  • Extra protection when the primary AC pump fails due to power outages.
  • Fully solid state automatic 10A charger/controller with alarm, light indicator and warning system.
Check Stock