Reviews Suction Fittings

BISupply 10 Foot Water Pump Hose for Water Transfer Pump - Spigot Suction Intake Outtake Clear PVC Hose with Couplings

  • [Transfer Water Anywhere]: The BISupply 10-Foot Transfer Water Pump Suction Hose is a transparent PVC hose that is lightweight and portable.
  • Use to evacuate a flooded yard, pump out water from a barrel, and more.
  • [Perfect Size]: 10-foot (3m) long water pump hose has brass male and female end fittings.
  • Fittings designed to fit standard garden hose spigot.
  • [Use Your Pump]: Threaded brass ends for use with your water pump.
  • Fits any sized pump with necessary adapter pieces (adapter and rubber gasket not included).
  • [No Collapsing]: Constructed from transparent, flexible PVC that is reinforced to handle full vacuum (suction) and pull water from a source through your pump without collapsing.
  • [Package Contents]: Hose water pump package includes (1) water suction hose, male/female brass couplings, and (6) plastic zip ties.
Check Stock

Zodiac Cyclonic Scrubbing Turbine Assembly MX8 Pool Cleaner R0714300

  • Works with Zodiac automatic suction pool cleaners.
Check Stock

Marlig Industries S Fix Marlig for Swimming Pool Spa Hot Tub Leaks 32 oz None

  • With pump running add FIX-A-LEAK slowly through skimmer or in front of any other suction intake..
  • After adding FIX-A-LEAK adjust suction to main drain. If this is not possible, the vacuum cleaner could be used alternatively, simply by placing the....
  • FIX-A-Leak is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension, either manually using a pool broom....
  • After the leak has stopped and given the proper time to cure, (24-48 hrs.) you may return to normal filtration. Sand filters: Set filter valve to....
  • Suction Leaks are usually known by air mixed with the water at the return fittings. In most cases suction lines only leak water when the filter pump....
Check Stock

Blastline 2\ Dia Heavy-Duty Clear/Orange Braid Flexible PVC Suction and Discharge Hose Assembly, Part CxE Cam & Groove (10 Feet)

  • Applications: Fish suction, Irrigation lines, Pumps, rental and construction dewatering, Trash Pumps, Suction and discharge, Water suction - heavy duty.
  • Assembly Type: 2 Inch Part C x Part E Cam & Groove Fittings.
  • Construction: Double-ply PVC tube, polyester fabric reinforcement and rigid PVC helix.
  • Clear visual flow, Excellent flexibility, Easy to drag with "Go-Glide" external clockwise PVC helix..
Check Stock

Blastline 3\ Dia Heavy-Duty Clear/Orange Braid Flexible PVC Suction and Discharge Hose Assembly, Part CxE Cam & Groove (25 Feet)

  • Applications: Fish suction, Irrigation lines, Pumps, rental and construction dewatering, Trash Pumps, Suction and discharge, Water suction - heavy duty.
  • Assembly Type: 3 Inch Part C x Part E Cam & Groove Fittings.
  • Construction: Double-ply PVC tube, polyester fabric reinforcement and rigid PVC helix.
  • Clear visual flow, Excellent flexibility, Easy to drag with "Go-Glide" external clockwise PVC helix..
Check Stock

Seaworks Boat Winterizer Gravity Motor Cleaning Kit - Gravity Flow System DIY Winter Preparation Solution for Marine Engines - For Inboard and Outboard Engines

  • Seaworks Boat Winterizer flow system flushes, prepares and protects your boat engine for winter storage. Compatible for inboard and outboard engines..
  • Kit includes: antifreeze tank with on/off valve, T-Connector, shutoff valve, braided hose with fittings..
  • Fittings designed for uninterrupted antifreeze flow to your engines, cleans impurities and enhances engine performance. Use at regular intervals to improve engine life expectancy..
  • Antifreeze(not included) and flusher (not included) required to operate kit, 5-gallons of compatible antifreeze required for boat winterization. Do not use an antifreeze with a burst protection level of less than -50°F..
  • For front engine mounted raw water pumps (including most Volvos and inboards) a Front Engine Pump adapter (not included) is needed to connect directly to the suction side of the raw water pump. Do not attempt to to connect directly to the suction side of the raw water pump. Do not attempt to winterize a front engine mounted raw water pump system using this method..
Check Stock

Seaworks Boat Winterizer Gravity Motor Cleaner with Flusher Kit - Gravity Flow System DIY Winter Preparation Solution for Marine Engines - For Inboard and Outboard Engines

  • Seaworks Boat Winterizer flow system flushes, prepares and protects your boat engine for winter storage. Compatible for inboard and outboard engines. Flusher included with kit..
  • Kit includes: antifreeze tank with on/off valve, T-Connector, shutoff valve, braided hose with fittings, flusher..
  • Fittings designed for uninterrupted antifreeze flow to your engines, cleans impurities and enhances engine performance. Use at regular intervals to improve engine life expectancy..
  • Antifreeze(not included) and flusher (included) required to operate kit, 5-gallons of compatible antifreeze required for boat winterization. Do not use an antifreeze with a burst protection level of less than -50°F..
  • For front engine mounted raw water pumps (including most Volvos and inboards) a Front Engine Pump adapter (not included) is needed to connect directly to the suction side of the raw water pump. Do not attempt to to connect directly to the suction side of the raw water pump. Do not attempt to winterize a front engine mounted raw water pump system using this method..
Check Stock

Baracuda R0527700 MX8 Cleaner Hose for Pool Cleaner (Fоur Paсk)

  • This listing includes everything needed to get started today ~ New G3 Cleaner For In-Ground Pools, 36 Feet of Hose and an additional Diaphragm and additional finned disc..
  • works with low-speed pumps for maximum efficiency. Durable Long-Life Diaphragm with reliable, one-moving-part-technology.
  • FlowKeeper Valve automatically regulates water flow to maintain peak cleaning performance even with lower horsepower pumps. Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces..
  • 36-Fin Disc increases adhesion to pool surface and avoids getting hung-up on lights, drains covers, fittings and other pool features..
  • The Zodiac G3 In-Ground Suction Pool Cleaner is a quiet and powerful suction cleaner that works with low-speed pumps to clean with maximum efficiency..
Check Stock

Intex 28005E ZX300 Deluxe Automatic Pool Cleaner, Grey

  • KEEPS YOUR POOL CLEAN: Powerful 700 gal/hour water powered suction.
  • ALL-WHEEL DRIVE: Water powered all-wheel drive for swift cleaning action and superior wall-climbing performance.
  • REQUIRED PUMP: Intex pump with a flow rate between 1,600-3,500 gal/hour required.
  • DUAL SCRUBBERS: Rotating dual dirt scrubbers for cleaning even the finest and hard to remove dirt up to the water line.
  • DEBRIS FILTERING: Fine 6ga (0.15mm) mesh filter for capturing even the finest debris. 0.48gal large capacity debris container. 21ft 4in non-tangle hose.
  • PRESSURE SIDE OPERATION: Hooks up to the inlet for water coming back into the pool and uses the water pressure (not suction) to operate.
  • For use with Intex above ground pools with PVC liners and 1.5in threaded inlet fittings ONLY.
  • Not suitable for Intex Easy Set Pools or pools with inflatable top ring.
Check Stock

ZZHXSM Plastic 10 Pcs Standard Couplers Cake Decorating Pipe Tip Couplers for Icing Nozzles, White

  • Packing: 10 cake decoration couplers, enough to meet different purposes, you can change the test tube of similar size without emptying the contents in the decoration bag.
  • Standard fittings: These white fittings are 3 cm / 1.2 inches long and have a base diameter of 2.5 cm / 1 inch, suitable for standard size icing nozzles.
  • Available range: The standard coupler is suitable for all decorative bags and standard size tips, which can help you replace pipe tips without unnecessary waste.
  • Simple and easy to use: cut a small hole in the corner of the bag, insert the plastic coupler, and then fix the suction head and screws on the ring. After completion, remove the tip and coupler and clean them.
  • Durable and practical: The tube head connector is made of high-quality plastic and has a sturdy structure that allows you to decorate cakes and biscuits quickly and easily.
Check Stock