Reviews Stud Track

Mytee Products Heavy Duty Aluminum 4ft L-Track (2 Pcs) w/L-Track Stud Stainless Steel Ring (8 Pcs) Tie Down System for Enclosed Trailers and Cargo Vans

  • ✔ 2 Pcs - 4 Foot L-Track Aluminum: 48" L-Track with Pre-Drilled Holes. Hole Diameter is 0.25" (Fits Standard L-Track fittings).
  • ✔ Heavy Duty Aluminum. Easy to install in truck beds and trailers.
  • ✔ 8 Pcs - L-Track Stud with Stainless Steel Ring: Single stud fitting is designed to be used with L-Tracks, Stainless Steel Ring..
  • ✔ This is one of the strongest fittings available for securing into L track..
  • ✔ With the many uses of the L track, this fitting can be quickly snapped into the track to provide you the anchor point you need to connect your tie down straps too..
Check Stock

Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 8-Pack

  • This listing is for eight (8) double stud fittings with a RATED CAPACITY* of 5,000 lbs. The W.L.L.** (working load limit) is a 1,666 lb. capacity. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track..
  • RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. **W.L.L. The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
  • The fitting is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward..
  • Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. Base measures 2-1/2" long x 7/8" wide. 1/4" thick steel "O" ring measures 2" in diameter, large enough and plenty strong enough ....
Check Stock

Youliang 10PCS Bleed Fitting Rubber Cap for Bike Hydraulic Disc Brake, Black

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 5 Pieces = 1Pcs 12inch Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), 4 Pcs Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..
Check Stock

(Pack of 6) L-Track Double Lug Threaded Stud Nut Fitting Tie Down (No Track Included)

  • L-Track Double Lug Threaded Stud Fitting (Track not included).
  • One Piece Body Stud Construction with Nylon Lock Nut.
  • Working Load Limit: 1,000 lbs , 0º Vertical Breaking Strength: 3,000 lbs.
  • Great to attach your own attachement onto Tie Down System.
Check Stock

Ryobi Whole Stud Detector with LED Indicator ESF5001

  • ... More sensors = More accuracy. The ProSensor 710+ has 13 sensors. Conventional stud finders have 1 or 2 sensors. With more sensors, Franklin Sensors stud finders are the market’s most accurate and best stud finders. The ProSensor 710+ has a max detection depth of 1.6". The precision LEDs are spaced every 1/2" and track the location of studs while displaying the center and edges simultaneously..
  • EASY: One mode finds it all! It finds wood studs, metal studs and the ProSensor 710+ stud finder auto-selects the most accurate mode for changes in material or depth. No toggling between standard-scan and deep-scan. Also, with Franklin Sensors stud finders, no calibration is required. Just press and hold the button to begin your scan. Additionally, you can start over a stud, unlike other stud sensors that give false readings. It is undoubtedly the most intuitive stud finder on the market..
  • SHOWS THE CENTER AND EDGES OF STUDS SIMULTANEOUSLY: The ProSensor 710+ saves you time by showing you more of what is behind the wall. It displays the center and edges of studs simultaneously, shows double studs and irregular configurations found in older homes that other stud finders cannot detect..
  • DURABLE: Designed for all users from homeowners to DIY enthusiasts to pr....
Check Stock

US Cargo Control Black Powder Coated Aluminum L Track Tie Down System - 8 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else! The black track has a powder coat paint finish to protect the aluminum, and resist scratches and scuffs..
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 8 Pieces = QTY 4: 4' Lengths of Black Powder Coated Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Single Stud Fittings with Stainless Steel Round Rings. Does not include the mounting hardware..
Check Stock

US Cargo Control Black Powder Coated Aluminum L Track Tie Down System - 6 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else! The black track has a powder coat paint finish to protect the aluminum, and resist scratches and scuffs..
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 6 Pieces = QTY 2: 4' Lengths of Black Powder Coated Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Single Stud Fittings with Stainless Steel Round Rings. Does not include the mounting hardware..
Check Stock

US Cargo Control Aluminum L Track Tie Down System - 6 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 6 Pieces = QTY 2: 4' Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..
Check Stock

Franklin Sensors FS710PRO ProSensor 710+ Professional Stud Finder with 13-Sensors for the Highest Accuracy Detects Wood & Metal Studs with Incredible Speed, Yellow

  • ... More sensors = More accuracy. The ProSensor 710+ has 13 sensors. Conventional stud finders have 1 or 2 sensors. With more sensors, Franklin Sensors stud finders are the market’s most accurate and best stud finders. The ProSensor 710+ has a max detection depth of 1.6". The precision LEDs are spaced every 1/2" and track the location of studs while displaying the center and edges simultaneously..
  • EASY: One mode finds it all! It finds wood studs, metal studs and the ProSensor 710+ stud finder auto-selects the most accurate mode for changes in material or depth. No toggling between standard-scan and deep-scan. Also, with Franklin Sensors stud finders, no calibration is required. Just press and hold the button to begin your scan. Additionally, you can start over a stud, unlike other stud sensors that give false readings. It is undoubtedly the most intuitive stud finder on the market..
  • SHOWS THE CENTER AND EDGES OF STUDS SIMULTANEOUSLY: The ProSensor 710+ saves you time by showing you more of what is behind the wall. It displays the center and edges of studs simultaneously, shows double studs and irregular configurations found in older homes that other stud finders cannot detect..
  • DURABLE: Designed for all users from homeowners to DIY enthusiasts to pr....
Check Stock

Franklin Sensors T6 Professional Stud Finder with 6-Sensors for The Highest Accuracy Detects Wood & Metal Studs with Incredible Speed, Yellow

  • ...: More sensors = More accuracy. The ProSensor T6 has 6 sensors. Conventional stud finders have 1 or 2 sensors. With more sensors, Franklin Sensors stud finders are the market’s most accurate and best stud finders. The ProSensor T6 has a max detection depth of 1.5″. The precision LEDs are spaced every 1/2″ and track the location of studs while displaying the center and edges simultaneously..
  • EASY: One mode finds it all! It finds wood studs, metal studs and the ProSensor T6 stud finder auto-selects the most accurate mode for changes in material or depth. No toggling between standard-scan and deep-scan. Also, with Franklin Sensors stud finders, no calibration is required. Just press and hold the button to begin your scan. Additionally, you can start over a stud, unlike other stud sensors that give false readings. It is undoubtedly the most intuitive stud finder on the market..
  • SHOWS THE CENTER AND EDGES OF STUDS SIMULTANEOUSLY: The ProSensor T6 saves you time by showing you more of what is behind the wall. It displays the center and edges of studs simultaneously, shows double studs and irregular configurations found in older homes that other stud finders cannot detect..
  • DETECTS WOOD AND METAL STUDS: The ProSensor T6 will identify any change in d....
Check Stock