Reviews Stud Bolts

Spurtar Stud Remover Fit 1/4" to 3/4" (6 to 19mm) Bolt Extractor Nut Splitter With Knurled Roller and Cam Lock, Stud Extractor Tool For Broken Bolt Remover or Seized Studs

  • ...ge to threads. Cam rotates to grip onto the stud for quick and easy use. Help easy out bolt extractor set studs quickly and efficiently.
  • Safe Stud Extractor Tool: Spurtar professional tools are for commercial or occasional use. Suitable for safely removing broken or seized bolts and studs. 2 holes 1/2" (14mm) and 3/4" (19mm) allow for an optimal fit and minimize thread damage.
  • Bolt Extractor Operation Guidance: Use with 1/2-inch drive ratchet wrench or flex handle and turn the extractor to engage the cam and stud to tighten, then turn until the stud is removed..
  • Rounded bolt Remover Unique design: The design allows the tool to be flush with the mounting surface of the stud, so it can grab a stud that breaks off very close to the mounting surface..
Check Stock

Wax Rim Former Paddle Hot Plate Lab Denture New Dentist Dental Instrument

  • Removes broken screws, bolts and fasteners with ease..
  • This tool will remove any stud, screw, pipes and bolts from 3mm to 25mm..
  • Ideal tool for any professional or hobbyist..
Check Stock

Mostbest Head Stud Replacement Kit for SBC Cylinder Head Stud Set # 1525-Stud/ 279.1001

  • ❤️This kit has 14 long studs, 4 medium length, and 16 short studs..
  • ❤️ This listing is for the sbc head stud kit. We have used this kit on all of our sbc engine buildups, and the fitment is perfect. You will receive every stud needed to install both cylinder heads on your engine..
  • ❤️These head studs are made from aircraft quality 8740 high tensile strength chrome moly steel. They are twice as strong (190,000 psi steel alloy) as the stock head bolts. Kit that comes complete with 12 point hex nuts and washers. Very similar or rather identical in design and function to the ARP kits..
  • ❤️Studs make head installation a lot easier as the studs align the head and hold the head gasket in place.
  • ❤️ They clamp much better since the stud is loosely threaded into the block and the clamping torque is generated at the stud-nut interface rather than the block-bolt interface.
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

Brass Button, 10 Sets 5/6.5/8mm Solid Brass Screw Nail Durable Screw Suitable for DIY Leather Craft Belt Purse Handbag(8mm)

  • Steel flat round double-head stud rivets.
  • Used in riveting, decoration, fastening..
Check Stock

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

for sbc Valve Covers Gorgeri Cover Bolt Set,8 PCS Stainless Steel Cover Bolt Set Fits for 283 302 305 307 327 350 383 400 SBC Engine

  • Small Block Chrome Hex Valve Cover Bolts Set For CHEVY 283 305 327 350 383 SBC STUD KIT 8PCS/SET,Chrome Steel With Black Oxide Finish.
  • FITS 283 302 305 307 327 350 383 400 ENGINES..
  • SIZE - Bolts are 1/4" - 20 Thread Pitch. Bolts Measure 1 3/8" IN Length studs measure 1 1/4" IN Length..
  • EASY INSTALLATION - Direct replacement, fitment tested before shipping, no extra adjustment needed..
  • WHAT YOU'LL GET - Set of 8 CHROMED STEEL HEX HEAD BOLT KIT & 12 Months Warranty, If the chromed steel hex head bolt ever fails on your vehicle, or you got any problem with our products, feel free to contact us, we will sort things out together..
Check Stock

ZYTC Bullet Style Stubby Antenna Mast Radio Aerial Black Replacement Fit Toyota Tacoma 1995-2019 Harley-Davidson 1998-2019 | 4.2 inches

  • IMPROVE THE LOOK OF YOUR CAR: The Bullet Style Stubby antenna replacement is designed to match the factory base perfectly so it looks as good as the....
  • EASY INSTALLATION:No modification is required and You won't need any tools.Simply install this bullet antenna in minutes by unscrewing your existing....
  • COMPATIBLE TO MOST CAR MODELS:Comes with the necessary bolts,fitment for the cars matched to the bolts,such as Toyota Tacoma 1995-2019 /....
  • LONG LASTING - All Metal Hardware and 6061 Solid Billet Aluminum construction with Hard Anodize finish that will not chip or fade over time..
  • PACKAGE INCLUDES: 1 x Aluminum Stubby Antenna,6 x Different Size Stud bolts (Please select the correct one for your automobile),2 x washers.
Check Stock

5x5.5 Hubcentric Wheel Spacers for Dodge Ram 1500 2002-2010, Durango 2004-2009, Dakota 2005-2011, Dynofit 1.5 Inch 4Pcs 5x139.7 Solid Forged Wheels Spacer 9/16 Stud 77.8mm Hub for 5 Lug Wheels

  • Fits: 2005-2011 Dodge Dakota, 2004-2009 Dodge Durango, 2002-2010 Dodge Ram 1500, Do not use system filter, contact us if not sure your specs.
  • 100% Match Specs: wheel bolts pattern=vehicle bolts pattern=5x5.5", stud thread=factory bolts thread=9/16-18, hub bore:77.8mm, 1.5 inch/pc.
  • Well Made: forged 6061-T6 air Aluminum Alloy, 10.9 grade bolts(SGS Test Approved), heavy duty than other casting ones, give your truck really aggressive stance, driving straight and smooth.
  • Features: hub centric lip fits perfect to your hub, reduce vibration and danger especially in winter and bad environment.
  • Brand Guarantee: comes as picture shown in padding anti-cracking box, set of 4 hubcentric spacers and studs.
Check Stock