Reviews Stubby Screwdriver Extension

HONEYSEW Flat and Stubby Screwdriver Set Mini Stubby Tools Sewing Notions for Sewing Machine

  • Flat and Stubby Screwdriver Set. Stubby handle lets you get right at the problem. Handy for machine work. Set of two screwdrivers allows you to get in the small spaces.
  • Set of two screwdrivers allows you to get in the small spaces. One Flat Head and One Phillips.
  • Flat and Stubby Screwdriver Set Mini Stubby Tools Sewing Notions For Sewing Machine.
Check Stock

STREBITO Right Angle Screwdriver 32-Piece 1/4 Inch Mini Ratchet Set Low Profile Offset Screwdriver Bit Set with 72-Tooth Ratcheting Wrench Stubby Ratchet 90 Degree Screwdriver for Small Spaces

  • 【Mini Size for Tight Spaces】STREBITO angle screwdriver set includes a low profile stubby ratchet which is only 3.66″ length, compact fit in your palm, make it a great troubleshooter and timesaver when work in tight spots. The precision 72-tooth reversible ratcheting mechanism produces a minimal sweep of 5 degrees while give more torque than short stubby screwdriver – perfect for tight, confined, close quarters, and hard to reach spaces.
  • 【Mechanical Design for Easy Use】The small ratchet set has been professional design to maximize your repair capabilities. Teardrop, low profile head offers better access, while a finger touch flip switch lets you change directions(clockwise/counter clockwise) with ease. The 1/4″ bit extension can extend your access to hard-to-reach places. And the bit holder has a magnet to prevent bit from dropping when replacing and supports smooth bit exchange.
  • 【Variety Bits for Common Application】This 32 Piece angled screwdriver kit offers a wide variety of 1/4″ bits for any user need – from standard phillips, flat head, square, pozidriv, to special security torx, tamper resistant hex, spanner and spline. Whether you’re experienced or just starting out, this micro ratchet set is a very professional a....
Check Stock

Klein Tools 80027 Screwdriver Set, 11-in-1 Multi-bit Screwdriver, 6-in-1 Stubby Screwdriver, Phillips, Slotted, Square, Torx Bits, 2-Piece

  • Klein Tools Multi-Bit Screwdriver Tool Kit includes the 11-in-1 multi-bit screwdriver / nut driver (Cat. No. 32500) , and the 6-in-1 multi-bit stubby screwdriver / nut driver (Cat. No. 32561).
  • 11-in-1 multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • 11-in-1 includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • 6-in-1 multi-bit stubby screwdriver / nut driver with compact interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes.
  • 6-in-1 includes non-magnetic nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted.
  • The compact design of the multi-bit stubby features standard 1-1/4-Inch (32 mm) shaft allowing easy access to tight work spaces.
  • Cushion-Grip handle provide greater torque and comfort.
Check Stock

WORKPRO Magnetic Screwdrivers Set, 8-piece Pink Hand tools for Womens, Includes Philips, Flathead, Slotted, Stubby Screwdrivers with Organizer Rack

  • Non-Slip & Comfortable: With PP + TPR material handle, WORKPRO magnetic screwdriver can provide maximum grip and comfort. Rounded end handle is stamped for quick screwdriver identification, simultaneously prevent tearing up the palm of your hand when putting pressure on it..
  • Organize Screwdrivers for Easy Grab: This magnetic screwdriver set is equipped with a wall mounted rack, holds your small tools with efficiently designed pink clips, so you will no need to worry about a cluttered work area or misplaced tools..
  • Great for Jobs in Small Spaces: The perfect stubby screwdriver for small, tight areas and confined spaces where regular screwdrivers are too big. WORKPRO magnetic screwdrivers sets are perfect for the maintenance needs of furniture, automobiles, motorcycles, bicycles, and other household products..
  • Durable & Anti-Corrosion: Magnetic Screwdriver's Rod is covered in nickel chrome plated and hardened at the magnetic processed tips, effectively against rust and corrosion for longer life. Magnetic tips can hold screws easily and make it to lift the screw after it has finished unraveling, prevent dropping and subsequently losing screws..
  • PINK RIBBON: WORKPRO Tools is donating $0.20 from this order of screwdriver set to NATIONAL BREAST CANCE....
Check Stock

ANEX Ultra Low Profile Offset Ratcheting Screwdriver 90 Degree Angled For Tight Area (Magnetic 5 Bits Set) Straight Flathead, Green

  • [ HIGH GRADE HEAVY DUTY RIGHT ANGLE RATCHET SCREWDRIVER ] Stubby low profile and long flat handle with 90 degree screwdriver & bits set are perfect for tight workspaces and close quarters. The plate-shaped handle is easy to press and apply force and even a strongly tightened screw can be easily loosened. ５bits phillips (+１mm, +2 mm, +2 mm, +3 mm) and flathead (-6 mm) are included..
  • [ MAGNETIC BITS MINI SLIM SCREWDRIVER KIT ] The bit holder has a magnet to prevent the bit from dropping when replacing and supports smooth work. The small pocket size is portable. You can put it in a tool box or put it in your pocket for work as well. The short & stubby bits do not disturb the work even in a narrow place..
  • [ EFFICIENT RATCHETING MECHANISM] It is a screwdriver with a ratchet mechanism that can turn the screw only by the left and right repetitive operations. Reduces screwdriver time and increases work efficiency. Both the tightening and loosening of the screws can be switched with the button on the screwdriver, so no need to change the grip..
  • [ AUTHENTIC JAPANESE QUALITY TOOL ] Made in Japan. ANEX official English pack....
Check Stock

ANEX Ultra Low Profile Offset Ratcheting Screwdriver and Hex Wrench 90 Degree For Tight Area (Magnetic 9 Bits Set) Upwards Angled Head, Red

  • [ HIGH GRADE HEAVY DUTY RIGHT ANGLE RATCHET SCREWDRIVER & ALLEN WRENCH] Stubby low profile and long flat handle with 90 degree screwdriver & bits set are perfect for tight workspaces and close quarters. The plate-shaped handle is easy to press and apply force and even a strongly tightened screw can be easily loosened. The upwards angled bent head allows screwdrivers to enter even complex work areas. 9 bits phillips (+1, +2, +3 mm), flathead (-6 mm) and hex (2.5, 3, 4, 5, 6 mm) are included..
  • [ MAGNETIC BITS MINI SLIM SCREWDRIVER KIT ] The bit holder has a magnet to prevent the bit from dropping when replacing and supports smooth work. The small pocket size is portable. You can put it in a tool box or put it in your pocket for work as well. The short & stubby bits do not disturb the work even in a narrow place..
  • [ EFFICIENT RATCHETING MECHANISM] It is a screwdriver with a ratchet mechanism that can turn the screw only by the left and right repetitive operations. Reduces screwdriver time and increases work efficiency. Both the tightening and loosening of the screws can be switched with the button on the screwdriver, so no need to change the grip..
  • [ AUTHENTIC JAPANESE QUALITY TOOL ] Made in Japan. ANEX official English package. High quality products ....
Check Stock

DURATECH Stubby Ratcheting Screwdriver, 12-in-1 Multi-bit Short Screw Drivers, Innovated Bits Quick-Load Mechanism, with Phillips, Slotted, Torx, Square Bits Stored in Handle

  • [High quality material] 12 in 1 stubby ratcheting screwdriver comes with 6 pc bits,including phillips, slotted, torx screw driver bits,PH1 / PH3,5 / 3 ,3/16 / 1/4,T20 / T25,PH2 / 4,T10 / T15, multi bits are made of high quality S2 alloy steel with nickel plating surface, high hardness, strong torque, corrosion resistance and beautiful appearance..
  • [Perfect design] This multi-bit small ratchet screwdriver with quick-load mechanism, automatic locking function, strong torque, one-handed switchable bits, internal structure of bit driver with 3 ball bearing lock mechanism, can quickly clamp the bits and prevent them from slipping off..
  • [Three ratcheting settings] This short multi screwdriver comes with 3 ratcheting switching modes, which can be adjusted by ratcheting settings to achieve clockwise, counterclockwise ratcheting and locking positions. It is more labor-saving and convenient than ordinary screwdrivers..
  • [Bits storage function handle] Ergonomically designed bit driver handle with bits storage function to store 6 bits, prevent bits from being lost and easy to carry..
  • [Multipurpose] This multi-head stubby ratchet screwdriver is 4 3/4'' in length, it is suitable for all jobs in tight spaces, DIY, home repair, tool repair, and various repair needs. Whet....
Check Stock

ANEX Ultra Low Profile Offset Screwdriver Set 3 Piece, 90 Degree Straight Slim Plate For Tight Area, Made in Japan, Black

  • [ HIGH GRADE HEAVY DUTY RIGHT ANGLE SCREWDRIVER ] Stubby low profile and long flat handle with 90 degree screwdriver set are perfect for tight workspaces and close quarters. The plate-shaped handle is easy to press and apply force and even a strongly tightened screw can be easily loosened. 2 types of phillips screwdriver and 1 type of flathead screwdriver are included..
  • [ MINI SLIM POCKET SIZE KIT EASY TO CARRY ] Portable small size. You can put it in a tool box or put it in your pocket for work as well. The short & stubby bits do not disturb the work even in a narrow place. The three drivers are bundled with a key chain to prevent the loss of tools..
  • [ HIGH QUALITY TOUGH STRONG & DURABLE BITS ] The material is high quality Chrome molybdenum vanadium steel from Japan with excellent toughness and wear resistance. Useful not only for DIY at home but also for professional hard work on site. Securely enters the screw groove to prevent the screw from being stripped..
  • [ AUTHENTIC JAPANESE QUALITY TOOL ] Made in Japan. ANEX official English package. High quality products manufactured by craftsmen in Tsubame city where is a famous site of metal and cutlery in Japan..
  • [ PRODUCT INFORMATION ] Total length: 4.25" / Thickness: 0.40" / Total Weight: 2.82 oz/ Han....
Check Stock

PZ2 x 38mm Pozi Headed Stubby Screwdriver with Magnetic Tip + Rubber Handle

  • Magnetic tip to prevent the screws falling off when using.
  • Comes with a soft compound rubber handle.
  • Stubby screwdriver for access in restricted hard to reach areas.
Check Stock

Black Watch Tartan 5 Piece Kilt Outfit - Size 38

  • ♥Package includes the essential tools for daily life: 8oz mini claw hammer with TPR handle.
  • ♥7 IN 1 MULTI - BIT SCREWDRIVER: Interchangeable screwdriver bit is fast and easy to switch out. 6 different bits inside the screwdriver head. Which....
  • ♥6'' ADJUSTABLE WRENCH: Heat-treated forge carbon steel with surface electroplate for a long time lasting. Small size design is easier to operate in....
  • ♥8OZ CLAW HAMMER: Stubby hammer consists of high quality forged head and TPR handle. Soft handle with shock absorption and antiskid function, which....
  • ♥PINK RIBBON: WORKPRO Tools is donating $0.20 from this purchase to NATIONAL BREAST CANCER FOUNDATION, INC.. NBCF is Helping Women Now by providing....
Check Stock