Reviews Strip For Cable

Litever Extra Under Cabinet Lighting Bars,12VDC, 5000K Daylight White, with Mounting Clips, Screws, Self-Adhesive Pads. Compatible LL-008 Series ONLY-[2-Pack-5000K]

  • 1.Damage Free Hanging.Say goodbye to holes, marks, or sticky residue on the wall or Cabinet.
  • Light Strip Clips are easy to use and help keep your surfaces looking beautiful..
  • 2.Color: Clear.High transparency, Fixed light srtips or organize cable wire, make your home and workplace look more beautiful..
  • 3.Strong Adhesive 3M VHB Tape.It can hold the LED light strip or usb cable wire strongly and removes cleanly. Easy to apply and remove.It usually takes more than 24 hours to exert the greatest viscosity and stabilize..
  • 4.Works On A Variety Of Surfaces. ATB-WL00512 mounting clips will help you achieving fixing your cable wire or LED strip light at home,under-counter, in your cubicle, outdoor,office,car or any workspace. Reminder: Clean the surface before pasting the clips..
  • 5.Strip Light Mounting Brackets and Cable Wires Clips. The clips fix clamp IP65 waterproof LED strip light and waterproof COB LED strip light within 12mm/0.47inch width(8mm/10mm/12mm).Also suitable for cable wire(diameter 0.12inch MAX),and Flat Cables(width less than 12mm/0.47inch,thickness less than 3mm/0.12inch). We suggest 3-5PCS per meter installation..
Check Stock

D-Line Cable Grip Strip | Floor Cable Cover for Closed Loop Carpet Only | 3” Width X 10’ Length (Black)

  • Cable organizer for under desks or around the perimeter of commercial style closed loop office floors.
  • Hook and loop design on rear of D-Line Cable Management Grip Strip, acts as a cable cover only for use on closed loop and commercial office carpet..
  • Easy to remove, reusable, no adhesive residue to clean up..
  • D-Line Cable Management Grip Strip is supplied coiled and simply uncoils to lay flat..
  • To install D-Line Cable Organizer Grip Strip, simply scissor cut length to required size - pinch cables - lay over flat length.
Check Stock

2 Pack 2M 6.5ft RGB Extension Cable LED Strip Connector 4 Pin Solderless Strip Jumper Cables Kit with 4 Pack 4 Male Pin Connector for 5050 3528 RGB LED Strip Light

  • Compatibility: fit for all 10mm 4-pin RGB LED strip lights, for Both 5050/3528 RGB Waterproof and non-waterproof LED strip light..
  • Easy to Install: Solderless, installation without tools, save time. Make sure arrow to arrow, plug and play..
  • Operating conditions: The RGB LED strip light extension cable supports maximum wattage of 72W , and 0-24v voltage input. Suitable for most 10mm 4-pin....
  • 2-pack extension cable: The RGB strip extension cables can connect between the IR/RF Controller and 5050/3528 LED strip light, extending strips to the....
  • What You Get: 2 packs 2M/6.5ft RGB Extension Cables, 4 pcs 4 male pin connectors, 8 pcs self-adhesive Cable clips, 30 days money back guarantee plus....
Check Stock

RGB LED Strip Extension Cable LED Strip Splitter 4 Pin 2 Way with 4 Pin Connectors Male Plug for 5050 3528 RGB LED Strip Lights

  • 4 pin LED splitter cable for - SMD 5050/3528/2835 RGB LED strip lights (with 4 pin or 4 copper contacts at every cutting line on the LED strip)..
  • This DC Power Adapter Cable splits 1 power signal into 2, enables you to connect 2 color changing RGB LED strips to a single controller.
  • Power supply with sufficient amperage for 2 strips is required.
  • High quality cable and connectors at competitive price.
  • Package Content: 2x RGB LED Strip Splitter Cable.
Check Stock

Gaobige Coax Cable Crimper Kit Tool for rg6 rg59 Coaxial Compression Tool Fitting Wire Stripper with Gaobige 10pcs F Compression connectors - Grey

  • VERY EASY TO STRIP CABLE ONCE YOU ADJUSTED THE CUTTING DEPTH FOR CABLE: Adjustable wire stripping Pliers, which head can rotate and adjust into four kinds of coaxial cables..
  • FULLY ADJUSTABLE AND REPLACEABLE BLADES CAN STRIP CABLE PERFECTLY: Work with RG-59, RG-59 Quad, RG-6, RG-6 Quad, and RG-58, 3V, 2V, 4C, 5C. Equipped with hexagonal tools can adjust the depth of the v-shaped incision, 3 to 7 Clockwise circle, one-time peeling, keep inner core..
  • SOLIDLY BUILT CRIMPING TOOL CAN PRECISE EXTRUSION THE F CONNECTORS: Work with rg-6, rg-59 etc. Compatible for most brands of compression connectors. Portable Size, handle made of the special soft material, non-slip, comfortable to use, feel strong..
  • PREMIUM QUALITY F CONNECTORS PREFECT FOR RG6 COAXIAL CABLE: It provides a professional, secure connection for RG6 coaxial cable. Anti-corrosion nickel-plated, for indoor use.
  • LIGHTWEIGHT AND EASY TO CARRY FOR INDOOR USE: Very convenient to install a satellite tv dish /cctv , move cable tv and cable modem, or wire up the cables for your new house.DescriptionFeatures:.
  • Very easy to cut cable once you adjusted the cutting depth for cable..
  • Fully adjustable and replaceable blades can strip cable perfectly..
  • Solidly built crimping tool can precise extrusion the F connect....
Check Stock

5050 4Pin LED Strip Connector Kit - 10mm RGB LED Connector Kit Includes RGB Extension Cable, 12x LED Strip Jumper, 10x L Connectors, 2X T Connector, 10x Gapless Connectors, 20x LED Strip Clip

  • ★PACKAGE INCLUDES: 1x 2 way RGB splitter cable, 1x RGB extension cable, 10x LED strip jumper connector, 2x strip to RGB controller jumper, 10x L Shape Connectors, 2x T Shape Connectors, 10x gapless LED strip Connector, 20x LED strip light clips, 10x 4 Pin Male Connector, 2x Pry opening tool.
  • ★APPLICATION: 10mm 4 wire LED light strip connector kit for waterproof and non-waterproof 5050 RGB Color Changing LED strip lights.
  • ★OPERATING CONDITION: These LED tape connectors support 0-4A current and 0-24V voltage input, heat resistance level from -20 ~ 100 degree.
  • ★NOTE: When connecting waterproof LED strip lights with these LED strip connectors, silicon gel on the surface of soldering area must be peeled off.
  • ★WARRANTY: 24 months warranty for all iCreating LED strip light connector, 90 days money back guarantee for any reason, 24 hours online customer service.
Check Stock

CTSGC Damage Free LED Strip Light Hanger Clips Adhesive for 10mm/12mm Wide IP65 LED Strip Light ,LED Light Clips for String Light and Fairy Light Cable,60 Clips,66 Strips and 60 Screws.

  • 1.Unique Structural Design.This Mini Light Clips Hinge Type,Can Be Opened And Closed Easily.Transparent Material,Damage Free Light,Hanging LED Light Strip and Fairy Light Cable,Easy and pretty.The Internal Dimensions Of These LED Clips are 12.3MM Width And 2.9MM Height..
  • 2.Removable Adhesive Tape Strip,Reusable And Damage Free Surface Hanging IP65 RGB/RGBW LED Strip Light 10mm/12mm Width,Fairy/Christmas String Light Cable,and USB Cable.Released The Led Strip Ligt And String Light Cable Decorative For Home And Party Easily..
  • 3.Two Installation:Adhesive Tape Strips And Screws-in.You can use it according to the actual situation,Damage Free Surface Wall Hanging,And Screw-in Reinforced Hanging Outdoor String Light Cable..
  • 4.Usage:Clear Mini LED Lighting Clips,Work On A Variety Of Smooth Surface Indoor And Outdoor.When Use The Adhesive Strip,Make Sure Cleaning And Dry The Surfaces Before.Do Not Hang Heavy Objects Until The Adhesive Viscosity Has Exerted The Maximum Effect,They Take One Hour Usually.
  • Do Not Use The Wall Clips Hanging Valuable or Irreplaceable items..
  • 5.Package:60PCS Clear Clips,66PCS Removable Adhesive Tape Strips and 60PCS Screws..
Check Stock

6 Pieces 4 Pin RGB Extension Cable LED Strip Connector Cord Wire Solderless Strip Jumper Cables Kit with 12 Pieces Pin Connector for 5050 3528 RGB LED Strip Light (Black, 1.6 FT, 3.3 FT, 6.6 FT)

  • What you get: the package includes 6 pieces of 4 pin RGB extension cable LED strip connectors and 12 pieces 4 male pin plugs for 10 mm 5050/ 3528 RGB waterproof and non-waterproof LED strip light.
  • 3 Different sizes: the length of the LED strip connector cable is 50 cm/ 1.6 ft, 1 m/ 3.3 ft, 2 m/ 6.6 ft, which can meet different DIY needs.
  • 2 Major functions: the RGB extension cable can be connected to IR/RF controller and 5050/ 3528 LED strip to extend the strip to reach an nice position.
  • Or it can be connected between 2 RGB LED strips, which is convenient and practical.
  • Easy to install: with 2 pre-welded female connectors and 12 pieces 4-pin male plugs (copper plated), the installation of these light strip extension cords do not need to be soldered and without tools, saving time.
  • Quality material: the insulation of the LED light strip extension cord is made of PVC material, which is corrosion-resistant.
  • The wire contains 4 strands of tin-plated pure copper wire, which is oxidation-resistant, flexible and durable.
Check Stock

Cable Management Box, 2 Pack Cable Organizer Box, Large and Medium Size Cord Box, Cord Hider Box to Hide Surge Protector Cover on Desk or Floor - Black

  • 2PCS Cable Box Value Pack: Large box(15.7"L×5.8"W×5.2"H) fits most 12 outlet power strips.
  • medium box(12.5"L×5.1"W×5.0"H) fits most 6-8 outlet surge protectors. Meet your need to hide different size power strips. Power strip and chargers are not included..
  • Ultimate Solution for Messy Cords&Power Strip: Get rid of the power strip and cable clutter to present a tidy and sleek look with our easy-to-use cord hider box, which is perfect for TVs and computers. Hide power strips, surge protectors, and organize wires easily with just a few hassle-free steps..
  • Multiple Openings for the Cords: The power strip organizer features an easy-to-open lid and 3 entries/exits for running through cables along the sides, providing you easy access to the power strip and cables inside and allow you route wires and plug or unplug easily whenever needed..
  • Strong and Durable: Made of tough high-density ABS plastic that is impact resistant, the surge protector box has been rigorously tested to make sure to handle anything your power strips end up needing..
  • A Gift for Your Family & Friends: The Cable Management Boxes are fit for cables and power strip organizing, giving you an organized and neat place. Also, a wise gift for your family and friends..
Check Stock

IDEAL Electrical 45-025 Lil’ Ripper Stripper – Wire Stripper w/ Slitting Blade, V-Notch, Flat Blade Clip

  • Cable Stripping Tool: designed to strip the outer jacket of NM cable cleanlyand quickly, this wire stripper is a portable handheld tool used by electricians for removing the protective coating of an electric wire to replace or repair it.
  • Precise Cutting: this wire stripping tool has flat blade that clips outer sheathing to remove excess wire jacket. This stripper has a V-notch that strip the outer jacket off the inner wires cleanly.
  • Ergonomic Grip: the electrical cable stripper has a slip resistant molded elastomer handle that ensures non-slip grip for clean and quick rip, cut or strip of the outer jacket of the NM cable.
  • Added Features: the cable stripper has looping holes that provide the perfect loop for screw-on devices. It has Twist-Assist wire connector wrench at the end of the tool ensures quick tightening of most twist-on connectors.
  • Product Specifications: the IDEAL electric wire cutter perfectly fits in the palm and does not weigh down you tool belt..
Check Stock