Reviews Straight through Fittings

A/C Hose Crimp Fitting Kit

  • Has everything you need to complete your custom A/C lines.
  • Includes enough hose and fitting for installations in applications without bulkhead fittings.
  • Fittings will need to be crimped at your local shop.
  • Kit includes (2) band clamps, (4) AN6 straight, (1) AN8 straight, (1) AN10 straight, (2) AN6 90 degree, (1) AN8 90 degree, (1) AN10 90 degree, (1) AN8....
Check Stock

MAXLINE COMPRESSED AIR TUBING MASTER KIT, 1' BENDABLE TUBING (M6580V, 300FT WITH SHUT OFF)

  • of 1-Inch Tubing, (3) Air Outlet Kits WITH SAFETY SHUT OFF BALL VALVES, (2) Tee Fittings, 1-Inch Straight Fitting, (30) Pipe Clips, Debar and Cutter Tool..
  • HIGHER FLOW RATE: This M6580V 1" Maxline 300FT Master Kit flows at 82 CFM at 300FT, versus the M7580 3/4" equivalent that flows at 39 CFM at 300FT..
  • 175 PSI Maximum working pressure, 1-Inch inside diameter x 1.2-Inch outside diameter..
  • Compression style nickel plated brass fittings. Use only with Maxline 1-Inch system..
  • Recommended on Industrial sized air compressors 7.5HP through 15HP..
Check Stock

Glarks 156Pcs Metric & SAE Straight and 45 Degree and 90 Degree Hydraulic Grease Brass Zerk Grease Nipple Fitting with 60Pcs M6 M10 Caps Assortment Kit

  • ☀ [What You Get]: This kit includes 12 sizes of Metric and SAE grease fittings, M6 x 1 straight for 10pcs, M6 x 1 90-degree for 7pcs, M6 x 1 45-degree for 7pcs, M10 x 1 90-degree for 10pcs, M10 x 1 45-degree for 7pcs. 1/8''-27 straight for 10pcs, 1/8''-27 45 degree for 7pcs, 1/8''-27 90 degree for 7pcs, 1/4''-28 straight for 10pcs, 1/4''-28 45 degree for 7pcs, 1/4''-28 90 degree for 7pcs. Red(M6) caps for 30pcs, black (M10) caps for 30pcs. Total 156pcs which are sorted packed in a plastic box..
  • ☀ [Premium Material]: Grease fittings are made of high-quality brass. Not only the surface is clean and shiny, but also anti-corrosion and anti-rust. They can work for a long time, use them to replace damage zerk fittings, and you will no longer have to worry fitting loss or damage..
  • ☀ [Strong Tightness]: The thread on the grease fittings is clean, tidy and deep, which can ensure that fitting is tightly engaged with grease lines, and prevent the fitting from fulling off or oil leaking form the side..
  • ☀ [Grease Fitting Cap]: Red (m6), black (m10) caps are included in the kit, different colors are convenient for you to distinguish. They can prevent dust, dirt and other pollutants from entering the nozzle, thereby extending the life of the grease fittin....
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • ...ine fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no tools or loose parts to handle in tight places. Save your effort and time. And pieces that contain a....
Check Stock

Plastic Quick Connect Male/Female Coupling Connector 3/16'' Hose Barb Insert 3 Set/Pack

  • Quick-Disconnect Fittings, Straight-Through Hose barbs.
  • Suitable for 4mm-5mm Inner Diameter Tube.
  • Subject Material: POM Sealing ring material: EDPM.
  • Suiltable for a wide variety of applications in pharmaceutical, food and beverage, labaratory, chemical.
Check Stock

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

  • ... are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Our air fitting kit quicks disconnect simply push tubing in, no tools or loose parts to handle in tight places. Save your effort and time.....
Check Stock

3-Way Solenoid Valve 3/8\ with All Fittings (12-Volt)

  • These have an air inlet, an air outlet and an exhaust port..
  • Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
  • Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
  • Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
  • Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 3-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.
Check Stock

WMYCONGCONG 80 PCS Hydraulic Zerk Grease Fitting Assortment Kit SAE Standard including Straight, 90 Degree, 45 Degree Angled Grease Fitting for Replacing Missing or Broken Zerk Fitting

  • High Quality: The grease zerks fitting are made of zinc-plated iron, galvanized iron with high strength is more durable and rust-resistance..
  • Time-Saving: The grease zerk nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, will not slippery when rotating, easy and convenient to handle..
  • Wide Application: These straight and angled grease fittings are great to replace your old or broken fittings in the hydraulic grease line, suitable for most automotive, motorcycle, truck, farm, and industrial applications..
  • Good Storage Organization: Different size of grease fitting is packaged into different grids with size label for easy identification. Durable plastic case, convenient to storage. Handy assortment in organized case, easy to carry..
  • 80 pieces SAE Grease Fittings Assortment Kit: Sizes include: Straight 1/8"-27(10pcs).
  • all common-used sizes, good value, come in handy..
Check Stock

Hooshing Brass Pipe Fitting, 1/2' Female to 1/2' Male Pipe Nipple Extension Connector Fitting, Hex Bushing Adapter, Reducer Adapter, Solid Brass Length 1.97 Inch/50mm

  • 【Material】High quality soild brass for corrosion resistance, high temperature ductility and low magnetic permeability. Strong and durable..
  • 【Size】1/2 Inch Female x 1/2 Inch Male Thread, the thread is NPS, have no tapered. It's straight thread..
  • 【Extension Design】Length: 1.97 Inch/50 mm, can be used to extend the length of the pipe or fitting.Deeper and smoother threads makes work easier and more efficient..
  • 【Widely Applications】Use to extend shower fixtures/arms through walls, extend tub spouts.Also be used with grease, fuels and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
  • 【Note】Brass pipe fittings for connecting pipes or fittings of different thread types, can be used in wet environments.Not recommended for potable water..
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock