Reviews Straight flute Cutters

FTG USA Replacement Wood Countersink Drill Bit Set 3 Piece Same Size #6 9/64 Parabolic Flute Taper Point for Woodworking with Straight Shank - Tapered HSS M2 Drill Bit Only

  • ...ic Flute allows chips to flow up quickly leaving less damage to be corrected after drilling. Improved chip evacuation leads to a better surface finish in the hole. The parabolic drill tip can slip-on wood surfaces.
  • it is recommended to hold it rigidly and drill slowly until the tip grabs the material.
  • Higher Quality cutters FTG Parabolic Flute drill bits are manufactured from premium High Speed Steel M2 Grade 6542. Parabolic flutes are constructed with a wider flute shape for increased chip flow.
  • THIRD-PARTY TESTED High Speed Steel M2 countersink drill bit for wood with tapered drill bits. FTG Parabolic Flute drill bits are premium products, they are higher quality cutters. Due to their unique design, with improved chip extraction, FTG Parabolic Flute drill bits drill holes faster than other drill models.
  • Company Based in Bloomfield, NJ, USA. This product is designed in New Jersey by Fair Trade Group USA LLC and Professionally manufactured in China at FTG USA specifications.
  • Packaging set combination/design protected by US Copyright Office. High Quality Material Component: High Speed Steel HSS M2 Grade 6542 confirmed in Certificate of Analysis issued by ANAB Accredited Lab.
Check Stock

Yakamoz 1/2 Inch Shank Bottom Cleaning Router Bit Surface Planing Spoil Board Surfacing Planer Slab Flattening Cutter Tool, Cutting Dia. 2-1/4 Inch

  • Industrial Quality Bottom Cleaning Router Bits.
  • 1/2 Inch shank, 2-1/4 Inch cutting diameter, 9/16 Inch Cutting Height.
  • Carbide cutters, solid hardened steel bodies with Anti-Kickback Design.
  • Featured with double flutes, straight shank.
  • Use on CNC and other automatic table-mounted portable routers.
Check Stock

1/16\ Tip Dia. x 1/2\ Flute Length - Solid Carbide Tapered End Mill - 10 Degree Per Side

  • 3PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • Ball Raidus 1/64 inch 1/32 inch 1/16 inch, Flute Length:15MM, Overall Length: 1 Inch.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, 3D carving.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

23pcs Woodworking Chamfer Drilling Tool Set Including 7pcs 3-Point Countersink Drill Bit 8pcs Wood Plug Cutters 6pcs Countersink Drill Bits 1pcs L-Wrench 1pcs Center Punch for Wood

  • 【Complete Drill Set】- Package includes7pcs 3-point countersink drill bit, 8pcs wood plug cutters, 6pcs countersink drill bits, 1pcs l-wrench and 1pcs center punch for wood. They can almost meet all brick and wood hole extraction needs of professionals or beginners. They are in metric size, and inches are converted..
  • 【3-pointed Countersink Drills】- 3-point countersink drill bits include 3mm(0.11"), 4mm(0.15"), 5mm(0.19"), 6mm(0.23"), 7mm(0.27"), 8mm(0.31"), 9mm(0.35"), 10mm(0.39") for drilling pilot holes. Drill tips adopt 3-point design for quick and accurate center punching, large chip flute and five edge chamfer allows faster and easier discharge of sawdust..
  • 【Wood Plug Cutters】- Wood plug set includes 4 standard plug cutters and 4 four-tooth chambered cutters. Their shank diameters are 9.5mm(0.37"), tail diameters size are 6mm(1/4"), 10mm(3/8"), 13mm(1/2") and 16mm(5/8")..
  • 【Countersink Drill Bits】- 1/4" hex 5 flute 90° countersink drill's diameters are 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4"), 90° angle on the point are designed for sharp and precise countersinking, five-flute designed with staggered cutting teeth can insure free chip flow and rapid chatter free cutting..
Check Stock

Progressive International Biscuit Set of 7 Cookie Cutters, 1 Pack, Multicolor

  • MULTIPLE COLORS: Set of 7 biscuit cutters in bright assorted colors.
  • VARIOUS SIZES: Size ranges from 1.5" to 3 7/8" in diameter.
  • REVERSIBLE: Smooth and fluted edges on each cutter.
  • MULTIFUNCTIONAL: Extra sharp rims cleanly cut through dough, bread, or a slice of produce.
  • DISHWASHER SAFE: These cutters are Dishwasher safe.
Check Stock

SpeTool 5Pc/Pack Tapered Cone 1/8 End Mills 0.5MM Cutting Radius 1.0mm Diameter 3D Wood Engrave CNC Router Bits Tools

  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance.
  • Ball Raidus 0.5MM, Flute Length:15MM, Overall Length: 1-1/2Inch, Single Side Angle 4.16°.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, 3D carving.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8 Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving

  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance.
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

Ateco Double Sided Square Cutter Set 6pc

  • Each cutter has a fluted side and plain side.
  • Cutters range in length from 1 3/4 inch to 3 1/2 inch.
  • Constructed of quality, long lasting stainless steel.
  • By Ateco – professional quality and quality design.
Check Stock

Wilton Round Linzer Cookie Cutter Set

  • Fluted cookie cutters have six interchangeable center shapes that let the filling show through.
  • Includes easy-to-make recipe and instructions included.
  • Cutters can also be used with any roll-out cookie recipe.
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock