Reviews Straight Hump Hose Silicone

2.25inch 57mm ID Straight Silicone Hose Coupler, Turbo Intake Pipe High Temp 3-Ply Reinforced 76mm Length (Black, 57mm)

  • It provides the required performance, reliability, strength and flexibility, improves the flow and performance of the engine cooling system.
  • Application: Cooling connector, Engine Cooling Hose, Intercooler Coupler Pipe, Basic replacement, Custom , Supercharger chargepiping set up, custom compressor, inlet for charged and supercharged car etc.
  • Package Content :1 x Straight Silicone Hose.
Check Stock

Guess What Day Is It Camel Funny Hump Day T-Shirt

  • The perfect gift for everybody to wear on a hump day while shouting woot woot..
  • Perfect gift tee for Hump day. Guess what tee t-shirt funny camel gifts. The hump guess what t-shirt. It is what it is t-shirt. Camel t-shirt for hump day t-shirt..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Builder's Best 010155 Venting. Offset Elbow, Dryer, 4-1/2 In, 1 Cubic Centimeters

  • ...t (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesive silicone seals create a good seal between the pipes and fittings, which can prevent th....
Check Stock

HPS Performance 1" ID, 10" Leg, 90 Degree Silicone Elbow Coupler Hose, High Temp 4-ply Reinforced, Black (HTSEC90-100-L10-BLK)

  • 10" leg length on each side (straight section). High Temp 4-ply Reinforced Silicone..
  • Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications.
  • Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system.
  • UV and ozone resistant. Silicone hose is NOT compatible with fuel or oil.
  • Recommended to be used with HPS Embossed Hose Clamp Part Number EMSC-25-40.
Check Stock

Techecook STV-90 Dryer Duct Connector fit 4in Vent Ducting - Dryer Snap to Vent 90 Elbow, Indoor Hook-up Dryer Vent Kit

  • ✅【PACKAGE INCLUDES】STV-90 Dryer Vent Connector Kit inclueds 1 x dryer vent elbow, 1 x snap connector, 1 x seal ring. The replacement part is made of silicone and other sturdy materials and well-tested by the manufacturer. You can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match.
  • ✅【90-DAYS WARRANTY】Risk-free shopping.If the STV-90 Dryer Duct Connector has quality problem or you do not like it, we support return, replacement or refund. We are committed to providing the highest quality products and best prices to create the highest quality life for you. We will try our best to solve the problem. Customer satisfaction is our unremitting pursuit.
  • ✅【COMPATIBLE MODEL】The Dryer Vent 90 Connector 5.5 in. L x 6 in. H x 4.25 in.Fit for most brands.This dryer hose connector is made to be easily cleaned out, and the sturdy construction prevents crushing, ripping or other possible damage to the connector. In the dryer duct Fitting , the silicone sealing strip has strong viscosity, is not easy to fall off, and can form a good seal between the pipe and the joint.
  • ✅【DIY INSTALLATION】The installation needs to use screwdriver. Wear gloves to protect your hands and cut off power and water before you ....
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 10 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap fit 4in vent ducting

  • ...t (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesive silicone seals create a good seal between the pipes and fittings, which can prevent th....
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 8 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap Fit 4in Vent Ducting

  • ...t (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesive silicone seals create a good seal between the pipes and fittings, which can prevent th....
Check Stock

TRIL GEAR 8pcs Universal 610mm 2.5' Aluminum Turbo Intercooler Piping Kit with Elbow Hose & Bolt Clamps

  • [Replacement for]- Replacement for Universal.
  • Package Includes: 2Pcs OD:2.5" Straight Aluminum Pipes + 2Pcs OD:2.5" 45 Degree Aluminum Pipes + 2Pcs OD:2.5" 90 Degree Aluminum Pipes + 2Pcs OD:2.5" 180 Degree Aluminum U Pipes + 2Pcs Blue ID:2.5" 90 Degree Silicone Hose + 6PCS ID:2.5" Straight hose (avaiable Color:Blue Black Red) + 16Pcs 2.5" Stainless Steel T-Clamps.
  • Specifications: Thickness: 1.8mm；Material: T6061 Aluminum；Aluminum Pipe Length: 23.62" / 60cm.
  • [Function]-Transport clean, dry, sufficient and stable air to meet the needs of the engine, and avoid the abnormal wear and tear of the engine caused by impurities and large particles of dust entering the combustion chamber of the engine..
  • [Note]-Before you place your order, please check the compatibility table in the upper left corner and page description carefully to ensure that it is suitable for your car. If you have any questions, pls ask us for help..
Check Stock

Ronteix Universal 4-Ply High Performance 3 Inch Straight Hump Coupler Silicone Hose 3 76MM

  • Inner diameter: 3"(76mm). Length: 3.0''(76mm). Thickness: 5mm.
  • Min temperature: -60 C/-140 F. Max temperature: 220 C/428 F.
  • Work pressure: 0.3 to 0.9 MPA. Bursting pressure: 2MPA.
Check Stock

Backnets Solid Brass High Pressure Hand Held Shower Wand Arc Design Square Head with Adjustable Supply Elbow Wall Connector Shower Holder and Hose Set(Brushed Nickel)

  • BRASS HIGH PRESSURE HANDHELD SHOWER UNIQUE DESIGN: Arc Design On the Edge Handheld straight square design, Never have to worry about shaving my body in the shower again，Shower wand is easy to grip and hold..
  • SELF-CLEANING SILICONE NOZZLES---60 Powered Anti-Clogging Silicone Jets , The Silicone Nozzles prevent the build-up of minerals, easy for Self-Cleaning by fingers..
  • HAND SHOWER HOLDER:Our round HAND SHOWER HOLDER does not have any sharp arcs,Brass Material,Adjustable,The male thread standard ½” NPT PIPE connectors and the male thread G1/2" shower hose connectors..
  • SHOWER HOSE: The external tube, 100% made by stainless steel, and two solid BRASS/COPPER connectors ensure non-rusty and durable.The internal pipe, 100% made by premium material EPDM, which is non-toxic & odorless, heat-resistan and cold resistant, high water pressure resistance..
  • Backed by Backnets’s lifetime support, offer replacement within 1 years. Any reason makes you dissatisfy with this shower system about our products please feel free to contact us..
Check Stock