Reviews Stock Keeping

Delmar Tools Patented Push Block For Table Saws, Makes Narrow Rip Cuts Safe And Easy, Helps Prevent Kickback

  • ... to a 1/4" wide smooth, easy, and safe! The Delmar Tools patent pending push block creates an adjustable width tunnel for the table saw blade to pass through under the push block on difficult narrow rip cuts as small as 1/4”. Gain complete control of both side of stock on your rip cuts.Helps reduce kickback while keeping your hands above and away from the saw blade..
  • THE BEST TOOL FOR EFFECTIVELY RIPPING THIN STOCK ON THE TABLE SAW- Unlike cumbersome push sticks and feaher boards, this push block design distributes even and accurate pressure to both sides of the stock for fluid rip cuts. This push block grips both side of the stock and guides it through the table saw cut while safely keeping your fingers and hands out of the way. Eliminates those dangerous close calls with your fingers by the saw blade on narrow rip cuts!.
  • USER FRIENDLY ADJUSTMENTS TO SET UP EACH RIP CUT- Adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different width cuts. Innovative balance wheel is deployed via a button to deliver stability on narrow cuts. No annoying thumbscrews that have to be loosened and tightened for each cut..
  • COMES FULLY ASSEMBLED, NO INSTALLATION NECESSARY- Arrives ready to go right out of the box, no frustrating assemb....
Check Stock

How to Catch an Elf

  • ...s try to cut the piece we need on the outside of the blade rather than dealing with narrow cuts. However, cutting narrow stock is sometimes unavoidable. In this case it is recommended that you use a safety device such as a push stick to help feed the stock through. Push sticks also help you safely push a workpiece, keeping it flat against a table top while it is being cut..
  • Designed to keep your hands away from blades or cutter, this push stick is an essential tool for your safety. The push stick prevents your hand from getting to close to the cutters or blades on table saws, router tables, shapers and jointers. The push stick has a 90 degree notch on the end with a relief circle to accept the 90 degree corner of your stock. The notched end is designed to be at the ideal angle to the handle and allows for even pressure while pushing stock through the blade..
  • One of the “handiest” features of this push stick is that we have embedded two magnets into the handle. We have done this because many of us have a hard time keeping track of our tools once we are done with them. The embedded magnets remedy this issue by allowing you to place the push stick directly on metal surfaces like the side of a table saw cabinet. We have embedded not just one, but two s....
Check Stock

Charging Bull and Bear Sculpture with Bronzed Metal Finish on Burl Wood Base

  • A unique look while keeping with the modern appeal. The PERFECT GIFT of luxury, design and function!.
  • This desk sized stock market Bull and Bear Statue is a great show piece that looks great in a home, executive office or financial firm..
  • Made of bronzed metal the fighting bull and bear statue is mounted on a solid burl wood base. Featuring the famous bull and bear fighting, it reflects one of the stock market's timeless themes..
  • A fine decoration for the executive or stock broker's office, it is a high quality and realistic. The bull and bear statue is made of cast material on a wood base. Elegant and sophisticated. A wonderful stock market gift idea.
  • FAST SHIPPING – from the moment you click purchase, shipped in 2 business days. Each piece goes through a rigorous QUALITY CONTROL inspection before shipping..
Check Stock

PIILOO Knife Making Tongs Set Assembled Knife Making Blacksmith Bladesmith Anvil Forge (3PCS)

  • ...s and can be shaped into box jaws, wolf jaws or v-bit tongs to accommodate various sizes of metal..
  • Material–Forged from high quality steel round stock, and finished with non-slip wax to protect from rust and corrosion. The size of all tongs is about 15 1/2 to 16 inches, making them easy to maneuver in addition to keeping your hands and forgings at a safe distance when removing steel..
  • Function–All tongs will provide you with excellent grip and deadlock the work piece so that you can accurately control over your work piece while delivering heavy hammer blows on the anvil..
Check Stock

Magswitch Ultimate Thin Stock Jig Rip Guide - Tool Attachment for use with the Magswitch Workholding System

  • The Thin Stock Jig Rip Guide attachment is the ultimate thin stock work holding tool - it's three tools in one! Built for use with the Magswitch Workholding system, the jig rip guide mounts to the Universal Mounting Base and MagJigs (not included).
  • Features a stepped side for most common sizes of 1/8, 1/4 and 3/8". The opposite side is sloped for odd sizes up to ¾ inch.
  • Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts and is low profile enough for use on your smallest tables.
  • This jig rip guide features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock, making it ideal for thin stock hold down or infeed/outfeed on a table saw.
  • The jig rip guide is built from strong and durable ABS UL94VO material for years of use. All required attachment hardware is included.
Check Stock

Knife Making Tongs Set - Bladesmith Blacksmith Forge Tong Tools Set Vise Tools Anvil Hammer (3-Pack)

  • 【High Quality Material】Forged from quality steel round stock with non-slip wax surface, rust and corrosion resistance, providing the user with a comfortable grip. All tongs measure about 15 1/2 to 16 inches, making them easy to operate and keeping your hands a safe distance from the forge when removing steel..
  • 【Package Includes】Including 1 x V-Bite Blade Tongs, 1 x Blade Tongs and 1 x Flat Tongs. This featured tongs kit will provide you with the versatility you need when forging knives..
Check Stock

Knife Making Tongs Set Forging Blade Knife Tongs Tools Assembled Knife Making Blacksmith Bladesmith Anvil Forge (3-Pack)

  • ...ed into box jaw, wolf jaw or v-bit tongs to hold various sizes of metal..
  • 【High Quality Material】Forged from quality steel round stock with non-slip wax surface, rust and corrosion resistance, providing the user with a comfortable grip. All tongs measure about 15 1/2 to 16 inches, making them easy to operate and keeping your hands a safe distance from the forge when removing steel..
  • 【Package Includes】Including 1 x V-Bite Blade Tongs, 1 x Blade Tongs and 1 x Flat Tongs. This featured tongs kit will provide you with the versatility you need when forging knives..
Check Stock

Blacksmith Forging Tools Knife Making Tongs Set Fire Tongs Anvil Blacksmithing Tongs Forge Tools Includes V-Bit Bolt Tongs, Wolf Jaw Tongs, Flat Tongs, Blade Tongs (Pack of 4)

  • Heavy Type Steel Construction: Sturdy and durable steel craft, finished with non-slip wax to protect from rust and corrosion for long-lasting reliability. Round stock providing the user with a comfortable grip. All tongs measure approximately 15.16 to 16.26 inches making them easy to operate in addition to keeping your hands a safe distance from the forge when removing steel. Specially designed for blacksmiths..
Check Stock

Wild Shot Butt Stock Ammo Holders for Shotgun and Rifle, Makes Reloading Faster and Convenient, 2-peice

  • FASTER RELOADING: Whether hunting or shooting for practice, its nice to be able to reload as quickly and efficiently as possible. The Wild Shot Butt Stock Ammo Holders helps achieve that goal. No fumbling around in pockets to find that round..
  • KEEP YOUR EYE ON THE PRIZE: By having your shells and rounds ready on the stock of your rifle or shotgun, you can reload safely while keeping your eye on that buck or duck. You know exactly where the next round is and how its positioned..
  • PLENTY OF AMMO WHEN YOU NEED IT: The Wild Shot Butt Stock Ammo Holder for rifles holds 9 rounds at the ready, while the shotgun version holds 5 shells. Plenty of ammo when you need it and its quick and easy to fill them back up..
  • NO INTERFERENCE: These ammo holders easily fit on the butt of your rifle or shotgun and are positioned so there will be no interference while holding, aiming, or shooting your weapon. The Wild Shot Butt Stock Ammo Holders install in seconds..
  • MAKES A GREAT GIFT: The Wild Shot Butt Stock Ammo Holders make a great gift for the shooters in your life. Whether they like to target practice, hunt or shoot for sport, they will love and appreciate this two-piece set..
Check Stock

Pack of 15 Chinese Take Out Boxes PAGODA 8 oz / Half Pint Party Favor and Food Pail

  • ECO FRIENDLY: Made from natural kraft paper stock using a chlorine-free manufacturing process and integrated soy blend eco-wax, this bag supports the....
  • KEEP FOOD FRESH LONGER: The Stock Your Home Kraft Brown Take Out Boxes are perfect for keeping your food fresh, as well as, refrigerating and....
  • HEAT TOLERANT AND LEAK-PROOF DESIGN: These large boxes were specially designed to hold greasy foods without having liquids seeping through. Your meals....
  • PERFECT FOR CATERING: Whether you're hosting a party or running a food servicing business, these containers are perfect for serving both cold and hot....
Check Stock