Reviews Stern Mount Trolling Motor

NyVoozy Transom Trolling Motor Mount for Kayaks, Trolling Motor Mount for Clamp-on Electric Trolling Motors, Maximum Trolling Motor Thrust of 62 Pounds

  • Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don’t worry rudder out of control any more. It is recommended using for towing motors which the biggest horsepower up to 3 HP or the biggest thrust up to 70 pounds, recommended the maximum weight for 55 pounds..
  • Our kayak rudder kit measures 3.75″ high x 4.75″ wide and suitable for a 23-32MM” shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It’s commonly used for motor guide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc..
  • It can last long time. And the screws are made from hight quality material which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater..
  • Very easy to install, just with screws, you could install our trolling motor mount to trolling motor only a few minutes. Because of multiple pattern screws, so you could install it on all kinds of boats..
Check Stock

Newport Vessels 55lb Thrust Electric Kayak Trolling Motor with Kayak Mount Set

  • FISH INSTEAD OF PADDLE: Get right on top of the big fish with this trolling motor and mount kit from Newport Vessels and you’ll be catching more....
  • MOTOR: The ultra efficient Newport Vessels 5-star rated Kayak Series 55lb Electric Trolling Motor will keep you fishing longer in fresh or saltwater.....
  • MOUNT: The Railblaza Kayak Transom Mount uses two sturdy StarPort HDs to securely outfit your kayak, this tested design can quickly be removed in....
  • INCLUDES: All necessary hardware is included in kit. Install the Railblaza Transom Mount on your kayak, bolt on Newport Vessels Trolling Motor, add a....
  • EEASY TO USE: Switch from paddle only, to motor ready in less than 30 seconds!.
Check Stock

Bullnose Rudder clamp on boat rudder fits a 1.125\ transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured

  • PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S.
  • FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more..
  • ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install a....
Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

  • 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
  • CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
  • FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
  • REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check Stock

Minn Kota 1358805; Trolling Motor, Terrova 55/ Ip_Bt 54 No Fpdl

  • What's in the Box: Terrova 55lb. 54" motor, i-Pilot Remote, Lanyard, Heading Sensor, MKP-32 Prop, Mounting Hardware. 2-Year Warranty.
  • Lift-Assist Design: A spring-loaded assembly on the Terrova mount makes stowing the trolling motor effortless, every time. Stow/Deploy Lever: Press this lever on the mount and fallaway ramps will effortlessly slide your trolling motor into the water. And when you're ready to move, Lift-Assist helps the motor stow effortlessly. Push-to-Test Battery Meter: Press a button on the trolling motor head to get an instant status of battery life you have left..
  • i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen..
  • Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay r....
Check Stock

Ironwood Pacific EasyTroller Trolling Plate - Standard with Fins for Motors 50 HP - 300 HP

  • SLOWS TROLLING SPEED - Slow your boat to as low as 1 MPH for the ideal trolling speed.
  • DAMAGE-RESISTANT DESIGN - The patented hinged plate design flexes upward to prevent damage to the plate under accidental acceleration.
  • EASY INSTALLATION - Mounts directly to the cavitation plate of your outboard or outdrive, a few inches behind the propeller.
  • TWO MODELS TO FIT YOUR MOTOR - The Standard Model fits outboard and stern drive motors of 50-300 horsepower, while the Short Model is for 30-45....
  • OPTIONAL FINS FOR GREATER PERFORMANCE - The optional hydrofoil trolling plate model combines two products into one to improve fuel economy and....
Check Stock

Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks

  • 【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
  • 【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
  • 【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
  • 【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
  • 【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.
Check Stock

Pro Controll EZ Mount II Bow Mount Trolling Motor Bracket

  • UNIVERSAL REPLACEMENT: A universal bracket that converts transom mount trolling motors to bow mount in minutes.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep..
  • STRONG & STURDY: Built to mount trolling motors up to 60 lb thrust.
  • Indestructible fiberglass reinforced nylon.
  • FAST & EASY SET UP: Installs quickly with a small hammer and punch to remove and replace pin.
  • Spend less time assembling and more time fishing.
  • ULTIMATE VERSATILITY: A trolling motor mounting bracket with choices.
  • EZ Mount 2 lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

Battery Box, Duokon Trolling Motor Power Center ,USB & 12V Charger Port Minnkota Trolling Battery Box Plastic Minnkota Trolling Motor Power Center Station Battery Box

  • ... please check online to avoid purchase errors.
  • Can display the current status ---- Motor Power Battery Box built-in battery meter can display the current charging status, easy to connect the battery terminal, used to connect the wire, only battery box / battery box, excluding battery.
  • Excellent material ---- Minnkota Trolling Battery Box is made of plastic material, durable, rust-proof, wear-resistant, corrosion-resistant, , which can effectively extend the service life of the product.
  • Superb craftsmanship ---- Motor Power Station strictly follows the original factory standard, after strict quality inspection by our production team, professional manufacturing, can provide lighting power demand in various scenarios, stable performance, long-term use.
  • Easy installation ---- The Motor Battery Box is easy to install and has reliable performance. The user can install it according to the installation instructions. The product also provides a pair of 12V accessory plugs and manual reset circuit breakers, which can directly replace the old or damaged ones.
Check Stock

Intex Seahawk 4 Inflatable Raft Set and 2 Transom Mount Boat Trolling Motors

  • Intex 12V Transom Mount Boat Trolling Motor | 68631E.
  • There will be no part of the lake out of your reach!.
  • Ideal for a wide variety of boats including these Intex inflatable boats:.
Check Stock