Reviews Stepping Motor Drive

DC 5V-9V 12V 2 Phase 4 Wire Stepper Motor Linear Rail 90mm Stroke Lead Screw Linear Stage Actuator with Nut Slider Step Angle 18 Degree for DIY Laser Engraving Machine

  • 【All metal】 The linear screw adopts an all-metal structure, with fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion..
  • 【Size】 Screw length: about 45mm/1.8inch, screw diameter: about 3mm/0.1inch, pitch: about 0.5mm/0.02in (moving in one step is 0.025mm, if smaller, you can use a subdivision driver)..
  • 【2-phase 4-wire stepper motor】 With a miniature 2-phase 4-wire stepping motor, the slider stroke is about 34 mm/1.3 inches, and the motor diameter is about 20 mm/0.8 inches. The driving voltage of the motor is 5-9V/200-600mA (the higher the voltage, the greater the force Larger, the greater the calorific value)..
  • 【Easy to use】 The micro stepping motor slide table can drive the accurate diagonal to move the metal slide up and down..
  • 【Application】 Stepper motor guide linear slide table can be used for DIY small slider/project/measurement equipment/laser printer, etc..
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

  • 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Motor diameter: 1.1 inches.Wire length：9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..
Check Stock

EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17 23 Series Stepper Motor CNC Controller single Axis Hybrid MicroStepping

  • This driver is an upgraded version of TB6600 and with plastic cover..
  • The subdivision is increased to 32 subdivision, which is suitable for high subdivision..
  • Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A..
  • Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires).
  • Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines,....
Check Stock

NIKKOR Z DX 18-140mm f/3.5-6.3 VR

  • Camera compatibility: Compatible with FX and DX format Nikon Z series mirrorless (27mm – 210mm on a DX format Z camera)..
  • Close focusing: Minimum focus distance of 7.9 inches (at the wide-angle position)..
  • Custom control ring: Turn the ring on the lens to control focusing, aperture, ISO or exposure compensation..
  • Video: Make smooth iris transitions and exposure adjustments.
  • and the ultra-quiet stepping motor prevents focus drive sounds from being captured on video..
Check Stock

Sigma 100-400mm f/5-6.3 DG DN OS Contemporary Lens for Sony E-Mount Bundle with LaCie Rugged Mini 1TB Hard Drive and 64GB SD Card (4 Items)

  • Bundle Includes: Sigma 100-400mm f/5-6.3 DG DN OS Contemporary Lens for Sony E-Mount, External Portable Hard Drive, 64GB Memory Card, and Photography Cleaning Kit.
  • Lens Construction: The lens construction comprises 16 groups and 22 elements, with one FLD and four SLDs used for the effective correction of aberrations and distortions. Built on the latest optical design technology and optimized for mirrorless systems, this lens ensures high-resolution image quality all the way to the edges.
  • Stepping Motor System: Thanks to the stepping motor system that is optimized for both phase detection AF and contrast AF, the Sigma 100-400mm f/5-6.3 makes shooting with the video or eye-tracking AF very smooth. This lens will expand the possibilities of mirrorless camera photography even further.
  • Image Stabilization: The Sigma 100-400mm incorporates powerful image stabilization (OS) of four steps built into the lens. When combined with a camera body with image stabilization built in, the lens corrects for pitch and yaw axis rotations, providing even more powerful image stabilization.
  • Effects: Exceptional level of bokeh and compression effect.
Check Stock

Panasonic LUMIX S PRO 70-200mm F4 Telephoto Lens, Full-Frame L Mount (Black)

  • LUMIX S PRO CAMERA LENS – 70-200mm telephoto zoom F4 L-mount lens, LEICA certified for LUMIX S Series Full-Frame digital mirrorless cameras.
  • O.I.S. STABILIZATION – Complies with LUMIX camera Body I.S..
  • 5-Axis Dual I.S. 2 [1] makes it possible to use 6-stop slower shutter speed [2].
  • LENS ELEMENTS – 23 lenses in 17 groups.
  • an aspherical lens and 3 ED (Extra-low Dispersion) lenses effectively suppress both axial chromatic aberration and chromatic aberration of magnification.
  • LENS FOCUSING – A double focus system combines a linear motor and stepping motor to achieve sensor drive at a maximum speed of 480 fps for fast, high-precision autofocus.
  • RUGGED LENS DESIGN – Dust/splash*/freeze-resistant design withstands use under harsh conditions for high mobility.
Check Stock

Usongshine Stepper Motor Driver TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor（1 pcs

  • Package included: 1 x Stepper Motor Driver..
  • ✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • ✿The largest 32 subdivision of the 6 models are optional.
  • Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper....
  • ✿Protect form✿: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage....
  • ✿Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines,....
Check Stock

Rotating Platform TBVECHI HT03RA100 Precision Electric Rotating Machine Optical Rotating Platform Motorized Rotation Stage 100mm Bearing Scale

  • ...l positioning and reading. The electronically controlled rotary table can be used flat, vertically, and inverted..
  • 【Useful】The limit function and zero function can be added. The stage can be used vertically or assembled with other stages. The prototype stepper motor 42 stepping motor (1.8°). The servo motor can be replaced according to requirements. The steel cup has high precision, large carrying capacity and long service life. (【Note】The turntable does not support optical angle feedback.).
  • 【Guaranteed】This item will ship from USA, delivery time need about 5-8 days. If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your buy, we will provide a money-back guarantee..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock