Reviews Steering Wheel Puller

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
  • This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
  • Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
  • Compresses locking plate spring to allow removal of retaining clip.
  • Allows access to turn signal switch and SIR modules on current GM vehicles.
  • Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
  • Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • EASY STORAGE: Heavy-duty 12.6” x 2.25”....
Check Stock

VQL Harmonic Balancer Steering Wheel Puller Kit (13 Piece) with Blow-Molded Case Use for Removing Harmonic Balancers, Gear Pulleys, Steering Wheels and Crank Shaft Pulleys

  • 【Widely Used】 Harmonic Balancer Steering Wheel Puller Tool are used to removal of harmonic balancers, gear pulleys, steering wheels and crank shaft pulleys. This is a universal type puller.003c/p003e.
  • 【Durable】 13 Piece Harmonic Balancer Steering Wheel Puller Kit are made of high-quality steel, Drop Forged, Heat Treated, this tool set is very durable.003c/p003e.
  • 【Apply Pressure Evenly】 Yoke allows for either 2 or 3-hole application. The harmonic balancer puller allows uniform pressure on the parts, No need to worry about the steering wheel puller and harmonic puller puller kit will damage the auto parts.003c/p003e.
  • 【Package Included】 1* center screw, 1* Floating swivel, 2* 5/16 x 4 bolts, 2* 1/4 x 3 bolts, 3* 1/4 x 2 bolts, 3* 5/16 x 2 bolts and 1* Blow-molded Case.003c/p003e.
  • 【Various Sizes】 Steering wheel pullers has a caster with four slots for using in nearly any configuration. Various sized provides necessary versatility.003c/p003e Buy with confidence. We provide refund and exchange service, if you have any questions, please feel free to contact us.003c/p003e.
Check Stock

ATPEAM Car Steering Wheel Puller | Automotive Steering Wheel Compressor Remover Set | Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • Built to Last: Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • Function: Remove steering wheels of most vehicles with or without telescoping tilt steering columns.
  • Use to apply equal pressure so you can safely remove steering wheels, Perfect for the home or professional mechanic.
  • Tips: We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • Various Steer Wheel Cap Screws: Includes 4 sets of cap screws to be used for various thread requirements. Size of Cap Screws: M8-1.25 X 90 Mm, 3/8"-16 X 3-1/2", 5/16"-24 X 3-1/2", 5/16"-18 X 4".
  • Package Includeds: This steering wheel removal kit includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements and a carrying case for your convenience.
Check Stock

WYNNsky 46 Pieces Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application..
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span..
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening..
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it..
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18....
Check Stock

OTC 7929A Steering Wheel Puller Leg Kit

  • Particularly useful during steering wheel removal when there are no tapped holes in the assembly.
  • Designed for use with either the 7245 or 7403 OTC steering wheel puller.
  • These legs get behind the steering wheel assembly to provide an even straight pull.
  • The collar is designed for use on Ford and Chrysler vehicles.
Check Stock

OTC (7927A) Steering Wheel Remover/Lock Plate Compressor Set

  • With this set it's easy to remove the steering wheels of most domestic and imported vehicles with or without tilt steering columns.
  • Also accesses the turn signal switch and SIR modules on current GM vehicles.
  • Includes steering wheel lock plate remover steering pivot pin remover for Saginaw steering columns and steering wheel puller.
  • Plus four sets of cap screws all contained in convenient plastic blow-molded case.
Check Stock

OTC 7403 Steering Wheel, Flywheel, and Pulley Puller

  • OTC's Steering Wheel, Flywheel and Pulley Puller works for a variety of applications.
  • Great for pulling steering wheels on most late model cars including domestic cars with or without collapsible steering columns.
  • Also functions as a standard 2/3-way puller for removing pulleys and small engine flywheels.
  • Cap screws included (pairs): 3/8-16 x 3-1/2 inches.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

Powerbuilt 647088 Steering Wheel Puller Set, Black

  • Design to pull steering wheels on most domestic and imported vehicles..
  • Heavy-duty drop-forged steel construction.
Check Stock

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
  • Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
  • The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock