Reviews Steering Gear Hoses

TOOLGUY REPUBLIC Fluid Transfer Pump - Powered by an Air Ratchet or Cordless Drill

  • Can be powered by an air ratchet or cordless drill. Universal adaptor with rubber mounting strap allows all drill sizes to be quickly mounted to pump.
  • Specifically designed for differential or transmission service. One hand operation leaves free hand to manage suction and discharge hoses.
  • Quickly fill or drain fluids: Brake fluid, Power steering fluid, Transmission fluid, Engine oil, Coolant, Gear/Differential oils.
  • Quick couple fittings allow: Easy hose changes, No drip storage of pump. Positive priming.
Check Stock

SOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS

  • Southwest Speed Heavy Duty Manual to Power Steering Gear Box Kit with 20:1 Gear Ratio, and 1400 Series Performance Power Steering Pump that fits 1976-1986 Jeep CJ > This Southwest Speed Steering Gear Box Kit includes Southwest Speed Re-manufactured Heavy Duty Factory Replacement Power Steering Gear Box featuring a 20:1 Gear Ratio with 13/16"-36 Input Shaft, and 1 1/8"-32 Spline Output Shaft.
  • Kit Includes: | Southwest Speed Re-manufactured 1976-1986 Jeep CJ Replacement Heavy Duty Power Steering Gear Box (# 105-2974) > Engineered for superior durability > O-Ring Ports > O.E. Spool Valves > Heavy Duty Gears > 20:1 Gear Ratio > 13/16"-36 Input Shaft > 1 1/8"-32 Spline Output Shaft > 2.750" Standard Piston Diameter > 18mm O-Ring Pressure Fitting > 16mm O-Ring Return Fitting.
  • Southwest Speed Re-manufactured 1976-1986 Jeep CJ 1400 Series Performance Power Steering Pump (# 149-1622) > Fits Jeeps with 258/304/401 cu. in. engines, as well as 4.0 Liter, with the OE Can > Re-manufactured > Perfect pump for rock crawlers > 1400 Series Pumps are Identical to the 1300 Series Pumps but are manufactured with much stronger components > Larger Ring and rotor which displaces more fluid per revolution.
  • Southwest Speed 1976-1986 Jeep CJ 5 3/4" Power Steering Pump V-Belt....
Check Stock

SWANLAKE Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer (1500ML)

  • Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • Includes 1 transparent fluid syringe with locking adapter, 3adapters,2 hoses with locking cap on end, extension for deep reach and small diameter applications..
  • The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
  • Heavy-duty construction allows for strength and durability. A high quality handle help holding pump easily..
Check Stock

Caltric Steering Sector & Pinion Gear W/Bushings Compatible With John Deere 155C 190C

  • 【PREMIUM QUALITY】Steering Sector Pinion Gear Rebuild Kit is made of quality steel and has nice anti-rust coated finish, which enhance the durability and superior reliability.
  • 【FITMENT】Steering sector gear and pinion gear replacement for John Deere 107H 107S 92H D105 D110 D125 D130 D140 & More. Please verify your model is listed in the fitment section.
  • 【REPLACES#】The package includes 1 x set sector plate and 1 x pinion gear as pictures show. The OEM Number: UC13515 GX26057 GX26220. Please note that the steering sector gear plate with 26 teeth!.
  • 【HIGH RELIABILITY】Taking into account the quality of the product, this steering pinion sector gear rebuild kit has undergone a rigorous testing to ensure proper operating parameters to factory specification.
  • 【24-MONTH WARRANTY】Exquisite craft, strict quality control and excellent after-sales service that is why our teering sector gear and pinion kit worth your purchase.
Check Stock

Suburban Gray

  • TEMPERATURE RESISTANT MATERIALS: Each hose in the Edelmann Elite line features innovative heat/abrasion tubing and is specifically designed to withstand a range of temperatures from polar vortex cold to extreme heat waves.
  • PREMIUM GRADE POWER STEERING EQUIPMENT: Designed to stand up to extreme conditions and rigorous daily wear, our power steering hoses absorb vibrations while reducing noise for quiet yet powerful performance.
  • RUST RESISTANT TUBES: Our high performance hoses have a durable zinc coating that helps prevent rust and corrosion damage.
  • Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity.
  • COMPATIBLE WITH: This hose fits various makes and models of 2013-07 GM Avalanche, Escalade, Sierra, Silverado 1500, Suburban, Yukon, Tahoe Vehicles. See the full list of vehicles below..
  • TRUSTED BY PROFESSIONALS: Plews & Edelmann is a leading designer, manufacturer and distributor of automotive parts, accessories, and tools sold to retail auto parts stores and industrial distribution outlets, worldwide.
Check Stock

ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose, Cooling System, Vacuum Hoses Clamping

  • ... Clamps]: Use the ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose Vacuum Hoses Clamping Tool to tighten and secure a CV boot banding strap quickly and easily.
  • [Fits Your Needs]: Use with banding straps up to 10 mm (2/5in) wide.
  • Suitable for ear-type hose clips found on a fuel, cooling, and vacuum hoses and on steering gear gaiters.
  • Compatible with VAG, Opel, BMW, Mercedes Benz, Honda, Mazda, and more.
  • [Easy To Use]: Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip tool nose and through winding mandrel slot.
  • Place 1/2-inch ratchet wrench on winding mandrel.
  • Bend band back over boot and onto clip to apply tension and cut.
  • Fold remaining band tail into clip and secure by tapping down clip ears.
  • [Comfortable Grip]: CV boot clamp tool features a 4.25-inch (10.8 cm) long plastic handle and a 1-inch (2.5 cm) long rubber grips on side levers for ultimate control, less user fatigue, and more productivity.
  • [Built To Last]: Constructed from zinc-plated alloy steel.
  • Standard band clamp crimper banding tool works with the installer’s ratchet and 1/2-inch socket (or included lever) to tighten and hold a band securely until clamped.
Check Stock

The ROP Shop | Steering Repair Kit with Sector Gear for John Deere GX21924, GX21924BLE

  • The ROP Shop replacement Steering Repair Kit with Sector Gear for John Deere GX21924, GX21924BLE.
  • Specs - Sector Gear Dimensions: 8 1/2" Diameter. 11/16" Inner Diameter. 5 5/8" Length. 5/16" Thickness. Pinion Gear Dimensions: 11 Teeth. 1" Height. 1 3/8" Outside Diameter. Shaft Bushings Dimensions: 1 1/8" Diameter without Tabs (1 5/16" with tabs). 5/8" Inner Diameter. 7/8" Height. Refer to image 2 for more information.
  • Includes - (1) Steering Sector Gear, (1) Steering Pinion Gear, (1) Bushing, (2) Screws, (1) Washer, (3) Lock Nuts & (2) Steering Shaft Bushings.
  • This kit is for/fits John Deere 102, 105, 107S, 115, 125, 135, 145, 155C, 190C, 92H, D100, D105, D110, D120, D125, D130, D140, D150, D160, D170, LA100, LA105, LA110, LA115, LA120, LA125, LA130, LA135, LA140, LA145, LA150, LA155, LA165, LA175, X110, X120, X125, X130R, X135R, X140, X145, X155R, X165 Lawn Tractors.
  • Please be sure to check your part or model number to ensure this is the correct steering repair kit for your unit. Also, please note this may replace multiple parts numbers.
Check Stock

Steering Gear Box Stabilizer Kit - Compatible with Dodge Ram Models - 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Ram 1500, 94-02 Ram 2500, 3500 4WD - Steering Brace Bar - Death Wobble Fix - 4x4

  • Steering Gear Box Stabilizer Kit - is designed to eliminate steering slop in your Ram Truck. This adds an additional bearing to the bottom of the steering box sector by a cross member tying the frame rails together which eliminates flame flex..
  • Compatible With Dodge Ram 4x4 Trucks - 94, 95, 96, 97, 98, 99, 00, 01 Ram 1500 | 1994 - 2002 Ram 2500 | 94-02 Ram 3500 |. WILL NOT FIT 2WD and Ram POWER WAGON models. Also similar to "Darin's Steering Stabilizer" (DSS) No drilling or welding required for the installation of this kit..
  • This Steering Gear Box Stabilizer Kit comes complete with all the hardware needed for proper installation which includes the stabilizing brace assembly, UCFL205-16 flanged bearing, and all the bolts and washers for your four wheel drive truck..
  • OEM Fit, Quality, Finish - Perfect snug fit that can be easily installed in minutes with no drilling or welding required. This steering gear box stabilizer manufactured by AA Ignition is designed to prolong the life of the steering components on your truck..
  • Lifetime Warranty - This steering gear box stabilizers kit comes complete with a lifetime warranty. If the part ever fail on your Ram truck simply contact us for a replacement. Save hundreds of dollars by getting quality parts & accessorie....
Check Stock

Edelmann 8904 Pitman Shaft Seal

  • Edelmann Steering Gear Lower Pitman Shaft Seal Kits include all the necessary components to reseal your leaking steering gear, restoring full factory functionality.
  • Includes only top quality components that meet or exceed OE specifications.
  • Affordable alternative to replacing the steering gear.
  • Each kit features all the necessary O-rings, seals, gaskets, hardware, etc. required for each specific application.
Check Stock

Boating Accessories New Mercury Mercruiser Quicksilver OEM Part # 92-858075Q01 Fluid Tm/Str

  • Superior quality, universal hydraulic fluid designed to mix with all hydraulic fluids in power trim and steering systems.
  • Protects seals and hoses, and prevent foaming, oxidation and corrosion..
  • Helps combat oxidation and corrosion in power trim and steering systems.
  • Recommended for all outboard and sterndrive applications except electric power steering systems.
Check Stock