Reviews Steel Wall Panel

Free

  • More than ten times stronger than conventional pegboard and 32in Tall x 16in.
  • Galvanized steel pegboard panels accept slotted, stable, and more secure hooks, pegs, brackets, and shelves.
  • Steel panel prevents the pegboard holes from fraying and wearing out over time. For mounting into concrete, we would recommend using Blue TapCon screws or equivalent.
  • Steel pegboards are constructed with a pre-formed 3/4-inch flange that separates the panel storage surface from the wall.
  • Pegboard panels mount directly into studs or sheet rock with no framework required.
Check Stock

HulkFit Y-Dip Bar Attachment for Wall Mounted Power Cage Black

  • Heavy Duty Steel Construction：4 strong steel hooks and heavy duty steel with high density non-slip grips, this unit is built to last which offers great stability and rigidity,supports up to 440 pounds..
  • Multifunctional Fitness Machine: This multifunctional wall mounted pull up bar can support many kinds of sport exercise like pull ups, chin ups, dip station, leg raises and boxing. Perfect for exercising your backs, shoulder, chest, arms, triceps, biceps, lats, and the front of your abs..
  • Easy to Assemble:A few minutes are just what you need in order to assemble our portable pull up bar..
  • Wall Mounted Requirements: Concrete brick/solid cement wall/solid red brick wall /solid tile wall are a great surface for mounting this pull up bar.DON'T install on hollow brick wall/honeycomb brick wall/drywall /sandwich panel..
Check Stock

StarTech.com 4U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT4)

  • 4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm], recommended for networking equipment up to 12in deep, leaving 2in for cable routing.
  • maximum weight capacity of 44 lbs [20kg].
  • EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
  • Installs onto 16" studs with mounting holes.
  • EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
Check Stock

StarTech.com 2U Vertical Wall Mount Patch Panel Bracket - Steel Rack Mount Bracket w/Hardware for 19

  • VERSATILE FUNCTIONALITY: This multi-use 2U vertical patch panel bracket enables you to mount your server, data, networking or AV equipment vertically on a wall or horizontally under a desk for added versatility..
  • STURDY DESIGN: Constructed to EIA-310 19in rack standards, the black wall mount patch panel bracket features a solid steel design for ultimate durability. The rack can hold up to 125.3lb (56.7kg) to ensure your equipment is secure..
  • NO ASSEMBLY REQUIRED: The open frame, L-shaped rack arrives fully assembled with cage screws for mounting equipment and 1 ½” screws for mounting the rack to wood surfaces. It’s a convenient solution for all your SoHo (small office/home office) rack needs..
  • STANDARDIZED HOLE SIZING: The wall mounting holes on the 2U vertical mountable rack bracket are 16” center to center to provide greater stability and match standard wall studs. It works with most 19” rack mountable equipment for ultimate compatibility..
  • INDUSTRY-LEADING SUPPORT: StarTech.com offers a lifetime warranty and free lifetime technical support on this wall mount patch panel bracket, and has been the choice of IT professionals and businesses for over 30 years..
Check Stock

HQYing 2U Wall Mount Patch Panel Bracket-19 Inch Vertical Wall Mount Rack- 125 Pounds Heavyload Wall Mountable Server Rack 2U Black

  • Product Size: 5.9" High, Fitting your Standard 19" Server or Networking Equipments..
  • Heavy Duty Loading: Made of one Piece of Steel and Makes the Bracket Strong Enough to Load 125 lbs Maxly..
  • Vertically or Horizontally Mounting: This multi-use patch panel bracket enables you to mount your equipment vertically on a wall or horizontally under....
  • No Assembly Required: the wall mount patch panel bracket arrives fully assembled with cage screws for mounting equipment in your data center.
  • Standard Wall Mounting Holes: Wall Mounting Holes are 16-inch Center to Center for Mounting to Standard Wall Studs..
Check Stock

Wall Control 30-P-3232GV Galvanized Steel Pegboard Pack

  • More than ten times stronger than conventional pegboard and 32in Tall x 16in.
  • Galvanized steel pegboard panels accept slotted, stable, and more secure hooks, pegs, brackets, and shelves.
  • Steel panel prevents the pegboard holes from fraying and wearing out over time.
  • Steel pegboards are constructed with a pre-formed 3/4-inch flange that separates the panel storage surface from the wall.
  • Pegboard panels mount directly into studs or sheet rock with no framework required.
Check Stock

iwillink (5 Packs Unshielded RJ45 Cat6 Keystone Jack, 180 Degree Toolless Keystone Jack

  • Toolless Termination - 24 Port Cat6 pass through Patch Panel came with couplers making it easier to connect the cables without any punching down. Simply plug the Cat6 cable into the 24 RJ45 coupler jacks on either side of the Ethernet panel..
  • Gold Plated Keystone - Gold-plated contacts ensure corrosion-free connections and improve connector durability. This patch panel meets and exceeds industry standards to support better network connections up to 10G Ethernet speed..
  • Rack Mountable - Install this Ethernet patch panel in a standard 1U (1.75") height universal 19" rack, cabinet or wall bracket..
  • Easy Repair - The keystone of coupler patch panel are removable if necessary for replacement or upgrade.Meanwhile, if need expand in the future, you can easliy replace cat6 coupler with other coupler such as fiber adaptor, coax coupler, HDMI, VGA and so on..
  • Detachable Back Bar - This patch panel wall mount is made of cold-rolled thick steel coverd by strong,painting and sanding ABS surface.It can effectively improve the working stability of the network connection port, and avoid the occurrence of network failures caused by loose cornerstones and loose cables..
Check Stock

DIYHD 8FT Stainless Steel Ceiling Mount Sliding Barn Door Hardware

  • Each two rollers can hold one door panel MAX weight 90kg.
  • Package's including:Flat roller*2,Stopper*2,4FT Track*2,Track connector*1,Track&wall connector*5,Floor guide*2.
  • The track is not pre-drilled 16" holes,can not be used for studs wall.
Check Stock

Proslat 88102 Heavy Duty PVC Slatwall Garage Organizer, 8-Feet by 4-Feet Section, White

  • ...askets, shelves and bins and the Proslat wall panel design makes it easy to add, remove or change the way you organize your space. Our wide selection of hooks, baskets and shelving is designed to give you maximum flexibility today and for many years to come. These hanging solutions are all made from high grade steel. We designed our backplates to disperse the working load throughout the wall so you can hang whatever you want without worrying. Powder coated finish adds durability and larger hooks feature rubber tips for safety. To view these items, type Proslat hooks, Proslat baskets or Proslat shelves in the search bar. Proslat also offers the Probin, the storage bin that offers maximum storage options. We designed our translucent Probins with a high load bearing capacity despite their lightweight construction. They are great for storing those products (like oil cans and soap containers) that often leak onto the floor. Probins are easy to wash.
  • you can even put them in the dishwasher. To view these items, type Proslat Probins in the search bar. If you are looking for a technologically advanced panel that is the strongest, greenest and simplest, Proslat is the solution for you..
Check Stock

DIYHD 6FT Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware

  • Each two rollers can hold one door panel MAX weight 90kg.
  • Package's including:Flat roller*2,Stopper*2,6FT Track*1,Track&wall connector*4,Floor guide*1.
  • The track is not pre-drilled 16" holes,can not be used for studs wall.
Check Stock