Reviews Steel Valve Casting

TCP Global Commercial 5 Gallon (20 Liters) Spray Paint Pressure Pot Tank with Manual Mixing Agitator

  • 2.5 Gallon Pressure Pot for Casting with Rubber Feet & Handle.
  • Features a Teflon coated steel tank for easy clean up..
  • Internal Dimensions : Wide: 9 ¼” , Deep : 10” with lid assembled.
  • Input connector, regulator, On/Off ball valve and pressure relief valve..
Check Stock

Yescom 3 Gallon Stainless Steel Vacuum Chamber Tempered Glass Lid kit Degassing Urethanes Silicones Epoxies

  • ...amber]: 3 Gallon vacuum chamber kit includes 1pc vacuum chamber with lid & gasket, 1pc glycerin filled gauge, 1pc silicone pad, 1pc hose and 1pc Teflon tape.
  • help for providing vacuuming and showing the accurate vacuum pressure, widely using on degassing urethanes, silicone, epoxies, extracting essential oil, resin casting and wood stabilizing.
  • [Easy Operation]: Glycerin filled industrial gauge for clearly displaying the operating vacuum pressure, perfect for you to monitor the whole vacuuming process.
  • noise eliminating valve for reducing vibration and noise.
  • air intake switch and air exhausting switch on the valve for easy to start and stop pulling vacuum.
  • [Durable Construction]: Made of strong stainless steel, the chamber ensures sturdiness, corrosion & rust resistance and durability.
  • high strength and shatter-resistant tempered glass lid for providing safety.
  • [Good Sealing]: Chemical resistant silicone gasket on the edge of chamber for providing perfect sealing on degassing.
  • max rated vacuum up to 29 inHg at sea level and can maintain vacuum within 24 hours.
  • [Practical Accessories]: Steel wire hose for strength and durability.
  • non-slip silicone mesh pad for placing in the chamber while degassing.
  • Teflon tape for enhancing the sealing tightness of join....
Check Stock

LIWEIKE Matte Black 3 Handles Shower Faucet Set with Tub Spout,Stainless Steel Tub and Shower Faucet Set with Valve,Wall Mounted,ASSB05U

  • 【2-Function Shower Set】Shower Faucets Sets Complete valve mixer made of copper casting,comes with USA Standard NPT 1/2 interface,easy to install..
  • Shower tub faucets sets complete with shower head, tub spout and rough-in valve for your easy installation and saving costs!.
  • 【3-handles】Come with three cross knob handles to control hot & cold water flow and switch water from the rain shower to filler spout..
  • 【8 Inches Shower Head】Matte Black Ultra-thin stainless steel shower head, ensuring water saving and providing aesthetic appeal. 8 inches large....
  • 【5 Years Warranty】All metal accessories, quality assurance and enjoy your bath!.
Check Stock

TCP Global 5 Gallon 20 Liters Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid Caster Wheels Regulator Gauge - Use for Curing Resin in Casting Molds

  • Professional heavy-duty 5 gallons (20 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds....
  • The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 12.3" inside diameter and is 13"....
  • Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge....
  • The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless....
Check Stock

MaxSen 60mm-245mm Adjustable Center Wall Mount 25\ Height Commercial Kitchen Sink Faucet Brass Mini Pre Rinse Unit with Spray Valve and 8 Inch Add on Spout (M6813-1P)

  • 8 Inch center Brass cartridge commercial faucet with Pull down Sprayer. This faucet features a 5-layers chrome plated casting brass construction that looks great in any setting and is easy to keep clean. The heavier and thicker copper cartridges are better sealed than the ordinary stainless steel cartridges. The mirror-like surface of the faucet makes you live a exquisite life. It is the smart choice to install the faucet on a 2 or 3 utility compartment sink of your restaurant kitchen..
  • Built-in water sealing washer , no need to apply PTFE tape.Easy Install.
  • Comfortable Height of 25'' , with 1.42GPM (5.38LPM) Water Saving Powerful Spray Valve..
  • Ceramic Cartridge with Brass Housing , New Designed "No Screw" Design Spray Valve, Avoiding Latent Leakage Problem Caused by Corroded Screw..
  • 8 inch 304 Stainless steel spout and Pre-rinse sprayer. The faucet comes with a 12 inch long touch spout. With the high pressure sprayer, the sink faucet can easy clean every corner of the commercial sink. The material we used to the swing spout and the sprayer is 0.8mm thickness of 304 heavy duty stainless steel whereas the similar product on the marketplace is made of 0.6mm of stainless steel which seems lighter and thinner. Our faucet is Overall, a price for a qualit....
Check Stock

DK SONIC Ultrasonic Cleaner with Heater,Timer and Basket for Lab Tools, Metal Parts, Carburetor, Fuel Injector, Brass, Auto Parts, Engine Parts, etc (30L, 110V)

  • 40KHz Ultrasonic Frequence for Intensive Rinse: 40KHz ultrasonic frequency can be used to clean stuffs with complicated surfaces, such as blind holes and deep holes etc..
  • SUS304 Stainless Steel Drain Valve and Die-casting Tank: Both the cleaning tank and drain valve of the device are made with SUS304 stainless steel materials, and that makes the device be resistant to weak acid and weak alkali..
  • User-friendly Control Panel with Simple Mechanical Controllers: The devices are equiped with two simple mechanical industrial controllers which have a long service life and make the devices be operated easily..
  • Always ON or Free time setting among 0~20 minutes: Extensive time-setting range makes the device be freely set to work for any certain time based on the characters of the stuffs to be cleaned..
  • 20~80°C Heating Range for Degreasing and Dewaxing: Heating function is helpful for reducing the adhesion strength of oil and wax so as to improve the cleaning effect, and generally the best cleaning temperature is among 40~60°C, i.e. 104~140°F..
Check Stock

DK SONIC Ultrasonic Cleaner with Heater,Timer and Basket for Lab Tools, Metal Parts, Carburetor, Fuel Injector, Brass, Auto Parts, Engine Parts, etc (10L, 110V)

  • 40KHz Ultrasonic Frequence for Intensive Rinse: 40KHz ultrasonic frequency can be used to clean stuffs with complicated surfaces, such as blind holes and deep holes etc..
  • SUS304 Stainless Steel Drain Valve and Die-casting Tank: Both the cleaning tank and drain valve of the device are made with SUS304 stainless steel materials, and that makes the device be resistant to weak acid and weak alkali..
  • User-friendly Control Panel with Simple Mechanical Controllers: The devices are equiped with two simple mechanical industrial controllers which have a long service life and make the devices be operated easily..
  • Always ON or Free time setting among 0~20 minutes: Extensive time-setting range makes the device be freely set to work for any certain time based on the characters of the stuffs to be cleaned..
  • 20~80°C Heating Range for Degreasing and Dewaxing: Heating function is helpful for reducing the adhesion strength of oil and wax so as to improve the cleaning effect, and generally the best cleaning temperature is among 40~60°C, i.e. 104~140°F..
Check Stock

WOOSTAR 52.4mm Complete Cylinder Head 66mm Valves Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Go Kart Dirt Bike

  • Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
  • New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
  • Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
  • All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.
Check Stock

GM REMANUFACTURED 4.8L 5.3L Cylinder Head 706 Assembly w/Rocker Arms LS LR4 LM7 LM4 NO CORE CHARGE NECESSARY

  • Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
  • New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
  • Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
  • All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.
Check Stock

GM REMANUFACTURED 4.8L 5.3L Cylinder Head 862 Assembly w/Rocker Arms LS LR4 LM7 LM4 NO CORE CHARGE NECESSARY

  • Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
  • New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
  • Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
  • All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.
Check Stock