Reviews Steel Tubing Pipe

Rapid Repair RP77271 1/8 Inch to 1-5/8 Inch Outside Diameter Pipe and Tubing Reamer, Red (Single Pack)

  • Removes burrs on tubing from 1/8 inch to 1-5/8 inch outside diameter.
  • NOTE FOR USE: Little pressure is needed to deburr smaller pipe and tubing, too much force will cause damage to the pipe or tubing.
Check Stock

CG2-11 PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING PIPE BEVELING ​MACHINE

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel t....
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • Mini Tubing and Pipe Cutter: our tubing cutter is especially designed to assist plumbers, electricians and mechanics.
  • It is made of heavy duty alloy steel, this tube cutter mainly use for cutting copper, brass, aluminum and thin steel pipes.
  • Tube pipe cutter makes clean and precise cuts.
  • Various Tube Cuts: this tubing cutters will efficiently cut copper, brass, aluminum, thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
Check Stock

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confid....
Check Stock

MATEWORK Pipe Cutter - Fast Tubing Cutter Set with Mini Cutter & Deburring Tool Pipe Cutter Tool for Cutting 3/16 to 2 Aluminum Copper PVC Stainless Steel Tube for Plumber and Home Working 3PCS

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft ste....
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

Ridgid 64962 No. 73 Plastic Pipe and Tubing Deburring Tool, 1-1/2 to 3-inch plastic pipe capacity

  • This product manufactured in United States.
  • Removes the outside ridges and inside burrs on plastic pipe and tubing.
  • Features specially-designed, long-lasting cutting edges.
  • Incorporates a slip-resistant vinyl hand grip for added control and leverage.
Check Stock

BTSHUB Exhaust Pipe Cutter Tool, 3/4' - 3' Universal Exhaust Tailpipe Tube Cutting Pliers with 15 Blades for On- and Off-Vehicle Use

  • High-Efficiency Pipe Cutter: Quickly remove old exhaust pipes with the Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness. Suitable for mild steel, galvanized steel, copper, and aluminum pipes.
  • Unique Design: 10 inches (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. There is a cutting wheel on each roller for smooth tracking..
  • High-Quality Blades: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels, only a 1/4 inch rotation is needed for a complete cut..
  • Easy to Use: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • Comfortable Grip: 9.3 inches (23.6cm) exhaust pipe cutting tool has 3.8 inches (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security..
Check Stock

TOLESA Pipe Cutter Tool 3/16-2 Inch 5-50mm Heavy Duty Metal Pipe Cutter With Deburring Tool Pipe Reamer Sharp Copper Tube Cutter Speed Cutting Tubing Cutter For Stainless Steel Aluminum Brass Pipe

  • ...during tube cutting process, especially for various metal, stainless steel, copper pipes and tubes. It saves you from the trouble of uneven cutting surface due to unstable clamping..
  • 【Heavy Duty】 - The copper pipe cutter is made of high-density but lightweight aluminum alloy, which is durable and compact. Copper tubing cutter can ensure your cutting work is smooth and will not break after many cuts, and has a longer service life. And the aluminum alloy body makes the conduit cutter more suitable for cutting high-density metal materials..
  • 【Clean Cutting】 - The stainless steel pipe cutter with 6 ball bearings provides you with smooth cutting and improved cutting efficiency. However, some small burrs on the edges are inevitable in the process of cutting tube. That's why our aluminum pipe cutter is equipped with a deburring tool pipe reamer, which consists of a sturdy plastic construction and a high-speed steel blade. It can ream the inside and outside of the cut to prevent scratching..
  • 【Ease Of Use】 - The bottom of the brass pipe cutter is equipped with a knob, which is comfortable to hold, can quickly adjust the conduit cutter , and provides a strong clamping force to ensure the stability of cutting. Just rotate the tubing cutter, cut the pipe....
Check Stock

VEVOR Pipe Notcher Punch and Press Tool for 0-50 Degree Tube Notcher Tool Notches 3/4\-3\ Round Tubing Bore Hole Pipe Knotcher Aluminium Frame Tubing Notcher for Cutting Holes Through Metal, Wood.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. Hole saw not included..
  • Sturdy Construction: The tubing and pipe notcher is made of premium A3 low-carbon steel, make the notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-50 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Simple Operation: Ergonomic design and built-in protractor make it easy to use. The pipe notcher tool can work with a 1/2" drill for grooving 3/4" to 3" pipe, vise, or benchtop mount..
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock