Reviews Steel Structural Machinery

ALUMINUM WELDING: A COMPLETE GUIDE TO ALUMINUM WELDING

  • 1.【Body Material】This torch track gas cutting machine is made of high-strength aluminum ingot material, precision die-casting, reasonable structural design and good walking stability. It features light and compact in structure, as ideal portable machine..
  • 2.【Application】This machine is suitable for factories such as shipbuilding, machinery, steel structure, construction and other industries. Also suitable for other large, medium and small enterprises to cut steel..
  • 3.【Tech Parameters】Cutting Speed: 6"-31.4" (150-800 mm) /min.
  • Cutting Thickness: 0.23"-4" (6-100 mm) (by standard accessories). Grove range: I.Y.V(45°). Tracks: about 6'(1.8m)..
  • 4.【Advanced Design】The speed control series adopts mechanical speed regulation, which greatly reduces the influence of high temperature and humidity during cutting. And it adopts imported AC motor and has its own cooling fan, which has the characteristics of continuous operation under high heat conditions..
  • 5.【Detailed Instructions】This machine comes wi....
Check Stock

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

  • Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
  • Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
  • The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
  • The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
  • The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
Check Stock

Ram-Pro Stainless Steel Wire Brush for Power Drill Impact Brass Driver - Cleaning Brush Hex Shank

  • ...er x 2" brush, fine all-stainless steel wires, 1/4" quick-change hex shank fits power drills, impact drivers, die grinders, Length overall 4-3/4".
  • ✓ Quality: The finest quality Brushes to give you long service on the toughest cleaning jobs. These cup brushes are ideally suited for cleaning castings, structural steel and sheet metal. Durable Material: Stainless steel + Brass copper, strong and durable, can clean rust and detail completely, Hang-up hole for convenient storage..
  • ✓ Design: Designed for easy access into narrow holes and confined areas, Designed for use on right angle grinders. welding wire brushes are suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, special corrosion without damaging surfaces or fine features.
  • ✓ USES: Innovative spiral knotted wires construction for a narrow face and precision deburring, rust, spatter and paint removal, surface conditioning and preparation. Wire brushes are made of brass, stainless steel, strong and durable, can clean rust and detail completely..
Check Stock

Micarta Linen LE Phenolic Sheets .250inch (1/4inch) Thick x 12inch x 36inch,Natural(KS-2356-21-10)

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock

AIMIMI Bakelite Rod Brown Insulating Sticks Phenolic Resin Electrostatic Prevention Suitable for Structural Parts Length 500mm,Diameter,35mm

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock

ASI ASI328002 24Vdc Pluggable SPDT Relay with DIN Rail Mount Screw Clamp Terminal Block Base, 6 amp, 250 VAC Rating, 24 VDC Coil

  • SUPER MATERIAL: Made of high quality use semiconductor components. epoxy resin potting, threaded terminal wiring, high structural strength, impact resistance, strong shock resistance, small driving current at the input end can easily interface with computer terminals and various digital programmed circuits. Beautiful and generous, excellent electrical conductivity, safe and reliable, long mechanical life..
  • PACKAGE INCUDIGN: Include 2pcs solid state relay module, F type male connector easy for install simply push on it to the intended female connector antenna connection..
  • CONVENIENT TOOL: The shell of solid state relays is made of ABS flame retardant plastic material, waterproof, moisture proof, wear resistant, high temperature resistant, dustproof and oil resistant. The internal structure adopts a high-efficiency spring structure and has a high life. High mechanical strength, reliable and stable..
  • HIGH QUALITY: Super wear-resistant, anti-oxidation and corrosion resistance, reliable operation and low power consumption Fast switching speed, no spark, no noise, no electromagnetic interference, long service life, no electric shock, strong anti-interference, strong compatibility..
  • A WIDE RANGE OF APPLICATION: Widely used in Industrial automation, electric fur....
Check Stock

Centerforce N1747 Centerforce ® Accessories, Throw Out Bearing / Clutch Release Bearing \88 Buick Century 2.8L ( 173 ci )\

  • Mainly used for textile machinery, printing machinery, automotive industry, household appliances and more..
  • Enough room for grease to store with a longer relubrication interval..
  • High quality bearing steel, durable with high hardness..
  • Hard bearing steel with strong bearing capacity, not easy to deform..
  • Ensure that the clutch can be smoothly engaged, soft to disengage, reduce wear, and extend the life of the clutch and the entire driveline..
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock

3Dman GT2 Timing Belt Closed Loop Rubber Belt 200mm for Width 6mm for 3D Printer -10pcs

  • 003cb003eUpgrade Anti-slip Version: 003c/b003eThe tooth surface of the belt is made up of specially treated tooth cloth. 20 Teeth contact with the belt, that minimizes the chance of the belt slipping..
  • 003cb003eStable Transmission: 003c/b003eHigh precision. High-strength structural design, anti-extension, anti-jumping, make the transmission more stable..
  • 003cb003eLong Service Life: 003c/b003eWear resistant. Anti-wear nylon tooth surface for better protection of the tooth joint and extended service life..
  • 003cb003e Wide range of applications: 003c/b003eWidely used in 3D printers, milling machines, gear forming machines, drilling machines, CNC lathes, hobbing machines, dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, inkjet printer, and other mechanical transmissions..
  • 003cb003eMONEY-BACK SATISFACTION GUARANTEE:003c/b003eNo slip, high transmission efficiency, and greatly improve your work. If the belt disappoints you, simply contact us and we'll rush return your purchase price. 100% satisfied..
Check Stock

DEJUN Pneumatic Tapping Machine 360° Multi-directions Pneumatic Air Tapper Universal Flexible Arm Drilling Threading Machine M3-M12 Tap Collets

  • High Configuration - strong power pneumatic motor, 400rpm/min.
  • oil-water separator separates the oil and water from the air to ensure the normal operation.
  • the folding arm can rotate 360°on the workbench and tap vertically, 1000mm working radius..
  • Premium Quality - the pneumatic tapping machine adopts high strength, aluminum alloy, strong hardness, high efficiency, stable performance, simplified operation..
  • Overload Protection - our pneumatic air tapper has the clamping cylinder with overload protection device, when the tapping torque exceeds the rated torque, the adjustable safety clutch is separated to avoid tap damage..
  • Applicable Materials - can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials..
  • Applicable Fields - suitable for all machinery manufacturing industries, mold/plastic/printing machinery, packaging machinery factories, engineering machinery, automobile and motorcycle parts, aviation engines, rolling stock and other general machinery industries..
Check Stock