Reviews Steel Rule

General Tools 444 Depth/Angle Gage

  • This easy-to-use depth and angle gage allows you to accurately measure and mark the outside, inside and sloped angles of a surface.
  • The hardened steel base is grooved on both sides to deliver accurate angles.
  • Permits easy setting of the protractor angle to 30, 45 and 60 degree on both sides.
  • The rule can also be used as a depth gage for measuring small holes and slots.
  • Spring tension nut eases depth and anglemeasuring by securing rule in milled slot at a 90 degree angle to base.
  • This gage features a 6 inch by 1/4 inch etched stainless steel rule graduated in 32nds and 64ths with a 2-1/2 inch wide hardened steel base.
Check Stock

6\ / 150 MM DEPTH GAUGE METRIC & IMPERIAL STANDARDS - ENGINEERING

  • 6" / 150 MM DEPTH GAUGE METRIC & IMPERIAL STANDARDS - ENGINEERING.
  • This steel depth gauge is used to quickly obtain measurements of holes or grooves by adjusting the rule to the desired depth.
  • This depth gauge consists of a gun metal finished base and a steel rule.
  • This gauge can be adjusted to the required measurement and then locked into position by a knurled nut.
  • Head is cut out on one side, adjacent to the rule, permitting easier and more precise measurements.
Check Stock

General Tools CF1264 Ultra Test Flex Steel Rule

  • General Tools and Instruments CF1264 Ultra Test Flex Steel Rule, 12 In., 1 In. Wide, 1/8-1/16-1/32 and 1/64 is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 12 inches long, and has a width of 1 inch.
  • The graduations of measure are 1/8, 1/16, 1/32 and 1/64 inch.
  • Features a plastic sleeve for corrosion prevention and a hard satin chrome finish.
  • The rule is 12 Inch long and has a width of 1 inch.
Check Stock

General Tools CF1845 Ultra Test Rigid Steel Rule

  • General Tools and Instruments CF1845 Ultra Test Rigid Steel Rule, 18 In., 3/4 In. Wide, 1/32-1/64-1/10 and 1/100 is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 18 inches long, and has a width of 3/4 inches.
  • The graduations of measure are 1/32, 1/64, 1/10 and 1/100 inch.
  • Features a plastic sleeve for added corrosion protection, and a hard satin chrome finish.
  • The rule is 18 Inch long and has a width of 3/4 Inch.
  • Features a plastic sleeve for added corrosion protection and a hard satin chrome finish.
Check Stock

Incra Precision T-rules - Metric (150mm)

  • Instead of squinting at that blur of lines along the edge of your old steel rule.
  • Incra has re-invented the steel rule by putting micro-fine holes at every scale position.
  • Using a T-square this guide draws perfectly placed horizontal lines with dead-on accuracy, with guide slots that wrap around any edges.
  • Rule Set that lets you mark precisely where you want.
  • Micro-fine holes at every scale position.
  • Perfectly placed horizontal lines with dead-on accuracy.
  • Helps you draw perfectly placed horizontal lines.
Check Stock

Enjoy MFG Ribbed Seat Cover for 2001-2013 Kawasaki KX 85/100 - All Black/Black Ribs

  • Fits Kawasaki KX 85 / 100 2001 - 2013 Models.
  • Steel rule die cut panels for an exact fit.
  • Easy Installation and Handcrafted in the U.S.A..
Check Stock

General Tools 308 Pecision Flex Steel Rule, 3/4 x 6-Inch

  • General Tools and Instruments 308 Precision Flex Steel Rule, 6 In., 3/4 In. Wide, 1/32 and 1/64 Inch is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 6 inches long, and has a width of 3/4 inches.
  • The graduations of measure are 1/32 and 1/64 Inch.
Check Stock

General Tools and Instruments 307 Precision Flex Steel Rule, 3/4 x 6-Inch

  • General Tools and Instruments 307 Precision Flex Steel Rule, 6 In., 3/4 In. Wide, 1/8-1/32 and 1/64 Inch is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 6 inches long, and has a width of 3/4 inches.
  • The graduations of measure are 1/8, 1/16, 1/32 and 1/64 Inch.
  • Features a polished stainless steel finish.
Check Stock

Kungfu Graphics Custom Decal Kit for Yamaha YZ125 YZ250 YZ 125 YZ 250 1996 1997 1998 1999 2000 2001 YMYZ9601008-KO

  • Fits Yamaha YZ 125 / 250 1996 - 2001 Models.
  • Steel rule die cut panels for an exact fit.
  • Easy Installation and Handcrafted in the U.S.A..
Check Stock

Parrothead summers

  • Easy to Use - The square head can be moved up and down on the rule with a lockable assembly and a specially designed bolt to engage the slot for....
  • Perfect Attachment - The Center Head is an available attachment that provides an easy means of accurately locating the center of cylindrical or square....
  • Get Accurate Measurements - The protractor head has revolving turrets with direct-reading double graduations, a full 0 to 180° range in opposite....
  • Complete Quality Made Tool - The set includes the rule, square, protractor, and center heads that are made from durable hardened steel, which can....
  • Versatile Layout Tool - Starrett squares are offered in a practical variety of styles to suit the needs of the individual, whether it be a toolmaker,....
Check Stock