Reviews Steel Primer

POR-15 High Build Primer - 1 gl. - Sandable Bonding Coat | Fills in Minor Imperfections | Single Component Formula

  • ✅ POR-15 HIGH BUILD PRIMER - Provides sandable and buildable coating that can be applied over cured POR-15 Rust Preventive Coating and all POR-15 topcoats to enable quick refinishing and recoating of these products. Single component formula that fills in minor Imperfections and adheres well to steel, aluminum, stainless steel, brass, and other primed and painted surfaces..
  • ✅ INTERLOCKING PRIMER - Formulated with special adhesion characteristics that make POR-15 High Build Primer perfect for most painted surfaces especially POR-15 Rust Preventive Coating. Our High Build Primer Provides sandable and buildable coating that can be applied over cured POR-15 Rust Preventive Coating and all POR-15 topcoats to enable quick refinishing and recoating of these products..
  • ✅ APPLICATION - For maximum adhesion sand surfaces to be painted with 320 grit sandpaper. Clean painted and bare metal surfaces with POR-15 Cleaner Degreaser. Bare metal surfaces should be treated with POR-15 Metal Prep for maximum adhesion. Spray or brush on one or two covering coats of POR-15 High Build Primer and allow 10 to 15 minutes between coats. POR-15 High Build Primer can be topcoated after 24 hours of cure..
  • ✅ WHEN DO I NEED THIS? - POR-15 High Build Primer is highly resistant t....
Check Stock

POR-15 Self Etch Primer Spray - Gray - 15 Fl. Oz. - Adheres to Metal & Painted Surfaces | Quick Drying | Easy Application

  • ✅ POR-15 SELF ETCH PRIMER - Is formulated to dry quickly and promote adhesion for the coming layers. Proven to bond incredibly well to all top coats. For a superior layer of protection against rust, apply POR-15 Rust prevention coating following self etch primer spray..
  • ✅ APPLICATION - All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint and any other matter. Shake well before spraying. Spray two light coats of and allow 10 to 15 minutes between coats. Our Self Etch Primer can be topcoated in 30 minutes..
  • ✅ INCREDIBLE BOND - Our Self Etch Primer is NOT a high-build primer, but it can be sprayed on almost any painted surface and can be top coated in 20 - 30 minutes. It bonds incredibly well to POR-15 Rust Preventive Coating, and all topcoats bond incredibly well to POR-15 Self Etch Primer. It can be sanded lightly, and if desired, multiple coats may be applied..
  • ✅ WHEN DO I NEED THIS? – The etching creates a rougher surface for your topcoat to cling to, much like sanding would accomplish. It adheres well to steel, aluminum, stainless steel, brass, and other primed and painted surfaces. POR-15 Self Etch Primer will help maintain the overall look of your surface while preventing future rust and corrosio....
Check Stock

Canopus - 3M Scotch Brite Scuff Pads Very Fine and Ultra Fine (5+5)

  • 5Pk Grey Detail Sander + 5pk Red Maroon Scotch Brite pads, Scouring Pads, 3M Sandpaper Equivalent.
  • Load resistant, Performs like steel wool grade 00 without splintering, Ultra fine consistent finish.
  • Excellent general purpose sanding pads for prepping, final finishing and light cleaning, automotive primer, for final sanding of primer-surfacer, does not rust like steel wool.
  • Scotch Brite sponges may be used by hand sander, orbital sander, lathe tools and as boat accessories or auto body tools.
  • Aluminum Oxide, Made of nylon web,Designed for scuffing before applying paint and primer-surfacer like automotive sandpaper.
Check Stock

Evercoat Dura Build Acrylic Primer Surfacer for Body Filler, Putty, Fiberglass and More - 128 Fl Oz

  • Convenient Primer: Easily fills grind marks, sand scratches, and other minor surface imperfections.
  • Easily Applicable Primer: Use a primer gun with a 1.4 to 1.8 fluid nozzle or air cap.
  • Easy Sanding: Use 80, 180, 220 & 320 grit sandpaper on an orbital sander, depending on the surface.
  • Versatile Surfaces Application: Our products are applicable on steel, aluminum, fiberglass, and more.
  • Automotive Body Repair: We provide high-quality putty, primer, and body filler formulations.
Check Stock

RCBS Trim Mate Primer Pocket Uniformer, Large

  • Manufactured with high speed tool steel cutters.
Check Stock

Custom Shop - Gray DTM High Build 2K Primer Surfacer 2.1 VOC (1-1/4 Gallon Kit) High-Performance Direct to Metal Primer for Automotive and Industry use Kit= 1 Gal. of DTM Primer and 1 Qt. of Hardener

  • Custom Shop – DTM Series High Build DIRECT TO Metal Primer Surfaceris a 4 to 1 Mix Ratio high performance primer specifically designed to be used  DTM (Direct to Metal) .  DTM Series Primer contains an advanced resin technology system that offers superior adhesion to Bare Metal, Steel, Bare Aluminum, Fiberglass, Gelcoat, Body Fillers and many properly prepared Rigid Plastics and sanded OEM Finishes..
  • DTM High Build Primer is Lead and Chromate Free and its formulation contains a rich blend of Anti-Corrosive additives to achieve maximum defense against rust and corrosion while adding the benefit of outstanding adhesion. DTM also offers easy High Build Properties and is a fast dry product. Easy to Sand in as soon as 3 hours.
  • Custom Shop – DTM Series Primer is great as a DTM primer with an easy 4 to 1 Mix Ratio. And a low 2.1 Voc that can be used Coast to Coast.
  • DTM Primer Surfacer is Available in Primer Gray with 1-1/4 Quart and 1-1/4 Gallon kits available. Great for Automotive and Industrial applications. DTM is compatible with and can be top coated with most Automotive Paint brands like Custom Shop, Restoration Shop, PPG, House of Kolor, Valspar, etc..
  • Custom Shop DTM High Buid Primer Surfacer offers superior sanding characteristics and excellent To....
Check Stock

TP Tools 2K Direct-to-Metal (DTM) Epoxy Primer/Sealer - Gray, Quart #TP-1094

  • Good choice for complete or partial refinish work. Use when stripping entire panels or complete cars..
  • 2K epoxy primer/sealer is an isocyanate-free product designed to be used as a corrosion-resistant primer. It dries fast and provides very good topcoat holdout. Provides excellent adhesion to properly prepared steel, aluminum, factory finishes, fiberglass, and plastics. Can be topcoated with color or with 2K urethane primer. Sand and clean all surfaces prior to application..
  • 1:1 mix ratio (1 part primer to 1 part required TP Tools Activator - sold separately). Thin with urethane reducer - sold separately. Spray with 1.4 to 1.8 mm..
  • CAUTION - Respiratory Protection is required when painting. Not included..
Check Stock

White Epoxy Undercoat – Epoxy Paint and Primer Mix for Coating MDF, Plywood, and Porous Materials! Great for DIY Countertop Epoxy Kits! 1 Quart, 32 Fl Oz (Stone Coat Countertops)

  • Custom Shop – KEP Series Anti-Corrosive Epoxy Primer / Sealer is a 1 to 1 Mix Ratio high performance primer specifically designed to be used  DTM (Direct to Metal).  KEP Series Primer contains an advanced resin technology system that offers superior adhesion to Bare Metal, Steel, Bare Aluminum, Fiberglass, Gelcoat. Body Fillers and most properly prepared Rigid Plastics and sanded OEM Finishes..
  • KEP Epoxy Primer is Lead and Chromate Free and its formulation contains a rich blend of Anti-Corrosive additives to achieve maximum defense against rust and corrosion. It also offers excellent salt spray resistance and is a fast dry product..
  • Custom Shop – KEP Series Epoxy Primer is great as a DTM primer but also can be used as an excellent sealer for all single stage Urethane and Basecoat Clearcoat.  If used as a sealer add 1/2 part of XR70 or UR70 reducer, topcoat or basecoat can be applied in 30 minutes. Using KEP allows for excellent topcoat gloss holdout..
  • Available in Gray, Black and White in 1 quart kits, 2 quart kits, gallon kits and 2 gallon kits. Great for Automotive and Industrial applications. KEP is compatible with and can be top coated with most Automotive Paint brands like Custom Shop, Restoration Shop, PPG, House of Kolor, Valspar, etc..
Check Stock

Custom Shop Premium Black Self Etching Primer, 1 Quart - Ready to Spray Paint, Excellent Adhesion to Bare Metal, Steel, Aluminum, Fiberglass - Use on Automotive Car Parts, OEM Industrial Coating

  • Custom Shop – KEP Series Anti-Corrosive Epoxy Primer / Sealer is a 1 to 1 Mix Ratio high performance primer specifically designed to be used  DTM (Direct to Metal).  KEP Series Primer contains an advanced resin technology system that offers superior adhesion to Bare Metal, Steel, Bare Aluminum, Fiberglass, Gelcoat. Body Fillers and most properly prepared Rigid Plastics and sanded OEM Finishes..
  • KEP Epoxy Primer is Lead and Chromate Free and its formulation contains a rich blend of Anti-Corrosive additives to achieve maximum defense against rust and corrosion. It also offers excellent salt spray resistance and is a fast dry product..
  • Custom Shop – KEP Series Epoxy Primer is great as a DTM primer but also can be used as an excellent sealer for all single stage Urethane and Basecoat Clearcoat.  If used as a sealer add 1/2 part of XR70 or UR70 reducer, topcoat or basecoat can be applied in 30 minutes. Using KEP allows for excellent topcoat gloss holdout..
  • Available in Gray, Black and White in 1 quart kits, 2 quart kits, gallon kits and 2 gallon kits. Great for Automotive and Industrial applications. KEP is compatible with and can be top coated with most Automotive Paint brands like Custom Shop, Restoration Shop, PPG, House of Kolor, Valspar, etc..
Check Stock

Attwood 93038AI7 Primer Bulb for 3.8 inch ID Fuel Line - Not for use in The U.S.A

  • Fuel line primer bulb is alcohol resistant and suitable for use with leaded or non-leaded fuels. (NOT FOR USE in U.S.A).
  • Double check valve assures correct fuel flow direction and unrestricted flow..
  • Barb end fuel hose connectors included and attached with stainless steel hose clamps..
  • Easy to replace old primer bulbs with common tools. Hose clamps for fuel line on barb connectors required..
  • Check primer bulb and fuel line periodically for leaks, wear or loss of flexibility. Replace as needed..
Check Stock