Reviews Steel End Fitting - BestBuyersPro.com

Sooprinse Pressure Washer Wand,Stainless Steel Quick Connect Lance,Replacement Spray Wand,16",5000PSI

❤【High Pressure】5000 PSI high pressure power washer gun extension wand, brass fitting.ATTENTION：The end of the wand is M22 14. Make sure that the head of your pressure washer gun is this size. It can not be extended, the other end is 1/4 quick connection, mainly used to connect the nozzle..
❤【Perfect Size】16 inches stainless steel replacement lance.
❤【Quick Connect】1/4 inch stainless steel quick connect outlet fitting for easy attachment of spray tips and other accessories.
❤【Widespread Use】Can be used on both gasoline and electric pressure power washers.Universal fit for metric pressure washers, hoses, M22 Metric thread inlet fitting.
❤【Quality Assurance】With 3 years product warranty .Any problem,feel free to contact us.The professional team is always ready to serve you..

...i. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
5.Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..

Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
Stainless steel 304 for resistance to corrosion and high temperatures.
Ferrule Size(51MM end):64mm ferrule fits 2" tri clamp.
Ferrule Size(38MM end):51mm ferrule fits 1.5" tri clamp.

Ferrule Size(76MM end):91mm ferrule fits 3" tri clamp.
Ferrule Size(51MM end):64mm ferrule fits 2" tri clamp.
Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
Made of Stainless steel SS304,there for resistance to corrosion and high temperatures.

What you get: You will get a total of 6 sanitary tube caps suitable for 1.5 inch clamps, beautiful internal and external polishing, beautiful internal and external mirror surfaces, and smooth surface, acid and alkali resistance, corrosion resistance.
Quality material: this sanitary fitting cap is made of quality stainless steel 304, therefore, it's sanitary, rust and resistance to corrosion and high temperatures with long service life.
Easy replacement: it is standard size and regular material parts compatible with most standard size clover or clamp fittings, the solid end cap should be combined with a gasket and clamp to make a sanitary and easily cleanable connection.
Sealing performance: this stainless sanitary fitting cap has good sealing performance, it is clamping on to the end of a pipe or tube to close the line, providing a non-permanent seal that provides take down access.
Widely use: these stainless steel end caps can be applied in the dairy products, food, wine, beverage, cosmetics, mechanical and electrical engineering, mechanical manufacturing and and other sanitary process industries.

...ure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
however, depending on package requirement it can be modified to 3/8 inch. - Scale free filters can also be added to mist systems to prevent clogging of nozzles due to hard water..
Tubing - ¼ Inch OD Tube - Rated for 1500 PSI - Nylon Tubing - UV Treated - Available in Black, White, Beige and Grey Colors.
Fittings - ¼ Inch - Push Lok – Push to Connect - Nickel Plated - Rated for 2000 PSI - Re-Usable - Misting Tee comes with 10/24 threads - End Plug – Simply connect it to the misting Tee. MC13040-MC13041.

{Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
{Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
{Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
{Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
{Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....

Blank end fittings have no outlet and are used to block the line at any coupling point.
The end opposite the coupling head is flat, with an eye for a chain to secure the fitting when not in use.