Reviews Steel Concrete Nail

Ceiling Nailer Fully Automatic Nailing Woodworking Decoration Integration for Light Steel Keel, Steel Plate, Concrete, Bridge, Anti-theft (A9, Handheld)

  • ...ed design, built-in noise reduction, external sound insulation.
  • after the nail is fired, the sound comes out of the silencer hole and is absorbed by multiple silencers to achieve the ultimate silencer effect..
  • 【Adjustable power:】 4 blocks of adjustable power. Can hit 1 cm thick steel plate.
  • can hit C20-C70 grade concrete. It contains five poles and has a total length of 3.4m.
  • it can be used for 5.5m high floor slabs..
  • 【Automatic slag discharge:】 Comes with diversion groove, no need to disassemble and clean dust after finishing. After the integrated nail is excited, the shock wave discharges the residue from the muffler hole through the laminar flow groove and finally from the slag exhaust hole..
  • 【Material:】 High-strength steel is used to prevent corrosion and wear. The high-quality military materials are only used for military special technologies to ensure 100% firing and life expectancy of more than 20,000 times..
  • 【Scope of application:】 light steel keel, steel plate, concrete, wood, support installation, bridge, monitoring, anti-theft network, etc. 1 block is suitable for high-standard concrete.
  • 2 block is suitable for ordinary cement board.
  • 3 block is suitable for ordinary brick wall.
  • 4 block is suitable for wooden soft base..
Check Stock

100 Pcs 1/4 x 3 Heavy Duty Nail Drive Anchors Rustproof Drive Pins Zinc Plated Drive Anchors for Metal Steel Aluminum Angles Wood Concrete Hammer Fasteners Kit

  • A Box of 100: there are 100 pcs of 1/4" x 3" drive nail anchors in the package, plenty enough to use and replace to easily meet your daily and party needs.
  • Size Information: with a size of approximately 1/4" in diameter and 3" in length, this heavy duty nail drive anchor requires drilling a 1/4" diameter hole in concrete prior to installation.
  • Please confirm the size before placing an order.
  • Strong and Reliable: featuring zinc plated steel material, heavy duty drive nail in anchors are strong and reliable, not easy to break, deform, bend or rust, easy to serve you for a long time.
  • Practicality: these zinc plated nail drive anchors can fasten sheet metal, steel, aluminum angles, wood, etc., to concrete, ideal for structural anchoring, shelf anchoring, mechanical and handrail installations.
  • Easy to Install: 1/4 x 3" drive anchors are simple to apply, hit them into the reserved hole with a hammer, and they can be easily installed without additional tools, saving time and effort.
  • Note: anchors cannot be taken out after use, please confirm the insertion point before use.
Check Stock

Manual Steel Nails Gun Tool, Concrete Nail Gun, Mini Portable Nail Shooting Machine with 20 Nails, Nail Wall Fastening Tool for Cement Wall, Household Woodworking

  • 【LIGHT WEIGHT】 The mini nailer rivet gun is light weight and small in size. With a total weight of less than 1 kg, it is easy to handle and carry to various scenes..
  • 【SMALL HEAD DESIGN】This concrete nail gun adopts the latest small head design, suitable for ceiling. The handle is detachable and can be connected to an extension rod to work, and high ceilings can be completed without climbing. (Excluding extension rod).
  • 【4 GEAR POWER ADJUSTMENT】Unscrew the screw in the muffler sleeve, the more holes are exposed, the lower the power. 4 gears are adjustable, and can be applied to different usage scenarios, include steel, planks, concrete walls, and aluminum alloy trunking. Concrete nailer only takes 0.1s to pierce a 3mm steel plate in one step..
  • 【DOUBLE SILENCER】 Using the latest air compression technology and special noise reduction nails, thickened steel silencer to reduce noise. The construction environment is more comfortable and does not disturb family or neighbors..
  • 【EASILY USE】After the operation, hold the muffler cover, and compress it several times to remov....
Check Stock

The Hillman Group 42055 Fluted Masonry Nails

  • Material : High Carbon Steel - Package Content : 100 ( +/- 1 ) pcs Oval head - Weight : 145 g ( 5.11 oz. ) Shaft Diameter : 3 mm ( 0.11'' ) Total Length : 30 mm ( 1.18'' ) Head Diameter (Approx.) : 5 mm ( 0.19" ) - Hardened and Tempered Steel.
  • Thanks to the pointed tip angle, nailing can be done more easily than ordinary nails. They are suitable for fixing wooden boards directly to concrete wall, brick or hardwood..
  • Fixing metal sheets is possible with just a hammer without the need for a drill. Thanks to the tempering process applied after the hardening process, the breakage is prevented, the stress of the material is removed and optimum hardness is gained..
  • The coating on the surface of the nail protects the nail, prevents rusting and provides a long life..
  • To get the best performance and protect your hands, prevent the movement of the nail with pliers while driving the nail. For more information on fastening on metal surfaces, please see the product description section below..
Check Stock

The Hillman Group 42056 Masonry Nails with Fluted Shank , Blue

  • Material : High Carbon Steel - Package Content : 50 ( +/- 1 ) pcs Oval head - Weight : 175 g ( 6.17 oz. ) Shaft Diameter : 4 mm ( 0.15'' ) Total Length : 40 mm ( 1.57'' ) Head Diameter (Approx.) : 7.5 mm ( 0.29" ) - Hardened and Tempered Steel.
  • Thanks to the pointed tip angle, nailing can be done more easily than ordinary nails. They are suitable for fixing wooden boards directly to concrete wall, brick or hardwood..
  • Fixing metal sheets is possible with just a hammer without the need for a drill. Thanks to the tempering process applied after the hardening process, the breakage is prevented, the stress of the material is removed and optimum hardness is gained..
  • The coating on the surface of the nail protects the nail, prevents rusting and provides a long life..
  • To get the best performance and protect your hands, prevent the movement of the nail with pliers while driving the nail. For more information on fastening on metal surfaces, please see the product description section below..
Check Stock

OMOTOOL Brick Steel Nails Assortment Kit 220 pcs Galvanized Concrete Wall Nail for Hanging Pictures and Woodworking Cement Nails Suit for Drywall and Pine，5 Size Assortment

  • Various Sizes: package includes a variety of sizes of flat carbon steel nails suitable for your various projects. nail sizes:60*3.9mm,50*3.2mm,30*2.9mm,25*2.1mm,20*2.1mm..
  • High Quality Materies:made of 55# carbon steel,the nails are very hard and sharp enough to keep straight when you hammer them in,can be used at various types of materials, including wood and drywall,Suitable for use in most types of concrete walls, brick, plaster and pine..
  • Widely Used:This set of nails can be used with picture hangers to hang up objects, photo frame, wedding, exhibition painting and etc. also can used for woodworking, fix wall shelves and repair small things, handmade arts or other DIY home improvement projects..
  • Galvanized:The surface is Galvanized, more effectively prevent nail corrosion..
  • This kit comes with a high quality PP transparent case to store all 220 pieces of your concrete carbon steel nails, with five grids for easy to store and use..
Check Stock

Nylon Mushroom Head Drive Pin Nail-in Anchor 3/16 x 1-1/2 200 Pieces

  • Nylon mushroom head drive nail-in pin for anchoring and redundant fastening in concrete, block, brick or stone..
  • Anchor Diameter: 3/16". Anchor Length: 1-1/2"..
  • Nail Material: Steel. Anchor Body Material: Nylon..
  • Please see all available products by PHAT SATELLITE INTL.
Check Stock

Dewalt 20V Max* Cordless Concrete Nailer Kit

  • 【Heavy Duty & Durable】This industrial heavy-duty concrete T nailer with die-cast aluminum housing makes the entire gun lighter and durable.
  • 【Avoid Accidental Shooting】The thickened safety frame on both sides as the contact safety mechanism, will not shoot when not nail on the working surface, aims to prevent accidental firing and keep safe.
  • 【Quick Reloading & Large Capacity】Smooth and the well-treated magazine is for easy and quick loading by pressing the latch. The capacity is up to 100 pcs which allows you to work in persistence to reduce the interruption caused by reloading.
  • 【Friendly to the Users】Oversize handle provides more comfort and control. The front exhaust keeps the dust and oil away from your face. The nails reload visual window shows the remained nails to remind the operator to reload.
  • 【Longer Fasteners Acceptable & Wide Applications】 14GA concrete T nails from 1 Inch to 2-1/2 Inch length. Great Tool for truss building, construction framing, furring strips and decking. **For the OLD or HIGH-STRENGTH concrete floor, we suggest using conc....
Check Stock

5x70 mm - 2.7 inch Hardened Fluted High carbon steel nails for masonry and metal plates flat head zinc plated 30 pcs

  • Material : High Carbon Steel - Package Content : 30 ( +/- 1 ) pcs - Flat head - Weight : 300 g ( 10.58 oz. ) Shaft Diameter : 5 mm ( 0.19'' ) Total Length : 70 mm ( 2.75'' ) - Head Diameter (Approx.) : 9.5 mm ( 0.37" ) - Hardened and Tempered steel.
  • Thanks to the pointed tip angle, nailing can be done more easily than ordinary nails. They are suitable for fixing wooden boards directly to concrete wall, brick or hardwood..
  • Fixing metal sheets is possible with just a hammer without the need for a drill. Thanks to the tempering process applied after the hardening process, the breakage is prevented, the stress of the material is removed and optimum hardness is gained..
  • The coating on the surface of the nail protects the nail, prevents rusting and provides a long life..
  • To get the best performance and protect your hands, prevent the movement of the nail with pliers while driving the nail. For more information on fastening on metal surfaces, please see the product description section below..
Check Stock

VEVOR Pneumatic Nail Gun, ST64 14 Gauge Heavy Duty Concrete T Nailer 1" to 2-1/2", Air Nailer for Hardwood to Concrete

  • Born For Heavy Duty Applications: Vevor heavy-duty nail gun operates with 14 gauge concrete T-nails, harder and strong grip power.
  • This allows it to do jobs that regular nailers cannot, such as installing furring strips, plywood to concrete nails, decks, fencing, subfloors to concrete slabs, and more..
  • Compatible Nails & Big Capacity: Equipped with big Magazine Capacity to 100, compatible with 14 gauge concrete T-nails from 1" – 2-1/2".
  • Easily Adjust Nail Depth: This concrete nailer features with easy depth adjustment function to change nailing depth for various projects and materials..
  • Sturdy and Lightweight: Weight: 6.6 lbs/3 kg. Featuring an aluminum housing, this concrete nailer is durable and rust-resistant to withstand heavy use..
  • User-friendly Design: Ergonomic rubber handle and adjustable exhaust help reduce fatigue and maximize working comfort. The easy-to-switch safety lock is designed to prevent injury from accidental shooting..
Check Stock