Reviews Steel Chip

Micro 100 T-100-V Cut Off Tool - T Style - V-Groove - Brazed, 1/16\ Width.760\ Length, 1/2\ Square Shank Height, 4-1/2\ OAL, Uncoated

  • Double ended "T" style cut-off tool that is parallel ground to help achieve a straighter cut.
  • Tops are hollow ground to help curl the chip to center for better evacuation.
  • Additional V-groove ground into the top of the tool forces the chip into a " W" form to pull the chip to center resulting in better surface finish and chip evacuation.
  • Hardened and precision ground steel blades.
  • Solid carbide tipped with zinc coated hardened steel shank.
Check Stock

Micro 100 T-103-V Cut Off Tool - T Style - V-Groove - Brazed, 1/8\ Width, 3/4\ Length, 1/2\ Square Shank Height, 4-1/2\ OAL, Uncoated

  • Double ended "T" style cut-off tool that is parallel ground to help achieve a straighter cut.
  • Tops are hollow ground to help curl the chip to center for better evacuation.
  • Additional V-groove ground into the top of the tool forces the chip into a " W" form to pull the chip to center resulting in better surface finish and chip evacuation.
  • Hardened and precision ground steel blades.
  • Solid carbide tipped with zinc coated hardened steel shank.
Check Stock

1/8 27 NPT Tapered Pipe Thread Tap High Speed Steel Pipe Thread Tap

  • Using high-quality high-speed steel M2, vacuum heat treatment, can be used to process stainless steel, carbon steel, 48 steel, mold steel, etc..
  • Straight groove design, smooth chip discharge, not easy to form chip accumulation..
  • The blade is ground with high density, sharper, stable cutting, high hardness and wear resistance..
  • Uncoated tools only have a basic substrate, without any additional treatment or coating, suitable for a wide range of applications..
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Check Stock

1"-11-1/2 Npt Tapered Pipe Thread Tap High Speed Steel Pipe thread tap

  • Using high-quality high-speed steel M2, vacuum heat treatment, can be used to process stainless steel, carbon steel, 49 steel, mold steel, etc..
  • Straight groove design, smooth chip discharge, not easy to form chip accumulation..
  • The blade is ground with high density, sharper, stable cutting, high hardness and wear resistance..
  • Uncoated tools only have a basic substrate, without any additional treatment or coating, suitable for a wide range of applications..
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Check Stock

Multifunctional Axe Hammer Car Lifesaving Hammer Broken Window Multifunctional Portable Tool Safety Hammer

  • Stainless steel material 2Cr16, professional blackening, strong corrosion resistance. High hardness, easy to deal with all kinds of hard objects..
  • High carbon steel hammer head with high hardness. The clamp head easily cuts the iron wire. The axe easily cuts off wood branches and so on..
  • Material: stainless steel 2Cr16 blackened + wood chip handle/aluminum chip handle.
  • Using blackening process, stainless steel 2cr16 material.
  • Curved claw head, used to pry nails, etc..
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Hegebeck Carbide Hole Saw 3/4' Hole Cutter Carbide Tipped Tooth Round Hole Saw Drill Bit for Stainless Steel Metal Plate Iron Wood and Aluminum

  • 【Specifications】: Hole Diameter: 19mm / 3/4inch.
  • 【Material】: Adopt carbide material, longer lasting performance, unique cutting-edge grinding technology, sharp and wear-resistant, not easy to break, drilling high efficiency and fast chip removal, extremely long service life.
  • 【Features】: Fast cutting and chip removal, arc-shaped chip pocket design, conducive to the smooth discharge of iron filings, reducing chip jamming, and conducive to chip holding at the limit cutting depth.
  • Pilot drill spring design, control the displacement of the cutting edge, avoid damaging the drill bit by sudden cutting.
  • 【Applications】: Used with power drill, magnetic drills, benchtop drills to quickly and accurately cut stainless steel, sheet metal, cast iron, mild steel, aluminum less than 2mm.
  • NOTE: Prohibit the use of ceramic tile, concrete, walls, stone.
  • 【Guarantee】: We promise provide satisfied service for every client, if you have any question with the product, please contact us in time, we will solve the problem for you in 24 hours.
Check Stock

8pcs 2-12mm CNC Square Nose End Mills,Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm

  • 2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
  • Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry..
  • Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable..
  • Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
  • Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
Check Stock

Paragon Large Hot Dog Cart Red

  • Comes with red and yellow umbrella and blue base.
  • Umbrella has two adjustable heights-92" & 97" and when umbrella is fully extended it is 92" wide.
  • This sturdy cart is made of all steel construction and has a chip resistant coating.
  • Breaks down easily for storage and transportation.
Check Stock