Reviews Steel Bar Cutting Machine

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • ...: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
  • 【10】Shipping, under normal circumstances, arrives in Asia and countries in 7-15 days, and a....
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

findmall 8 Pcs Indexable Boring Bars Set,3/4 Shank,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pcs TCMT21.51 & 4 Pcs TCMT221,with Alumium Carrying Case

  • Product - Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use..
  • Parameter - Positive Rake 90Degree Lead, Uses 0.050 key, C6 grade: carbide for steel and alloy steel..
  • Function - Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips..
  • Feature - Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert..
  • Application - Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine..
Check Stock

SAM Replacement Snowplow Controller - Replaces Western/Fisher OEM Part# 9400, Model# 1306902

  • [Fits 54 Inch Blade] This wear bar replaces John Deere factory part #M75674 for 54″ blades..
  • [Stainless Hardware Included] Includes stainless steel fasteners for easy installation on your compact tractor..
  • [Laser Cut Holes] Our blade's holes are laser cut which allows this to fit perfectly..
  • [4-6x Longer Life] This wear bar blade is made of super wear resistant AR400 steel for maximum life. We also designed our wear bar to have a thicker cutting edge which helps reduce bounce and prolongs the cutting edge life..
  • [Built For Sub-Compact Tractors] Our cutting edge is designed to fit with your small tractor.
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Easy to Operate & Transport: This heavy-duty rebar cutter bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Easy to Operate & Transport: This heavy-duty rebar cutter bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • ...tools required,simply loosen the knurled chuck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
  • 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame contact is not easy to roll,1.15 pounds of solid aluminum bar handle to minimize the phenomenon of warping,the handle of the frosted sense of control more to let you handle any product details with ease..
  • 【LONG SERVICE LIFE】 - Weighing 1.15 pounds of solid aluminum bar handle,high-de....
Check Stock

yeshine T-Shaped Glass Cutting Tool, Tile Cutters, Automatic Control Oiling, Nylon Pulley, 120cm Thickened Aluminum Alloy Blade Bar, Hard Steel Scale, for Thick Glass, T-Glass and Tile Cutting

  • 【Professional porcelain/glass cutting machine】: Professional manual tile and glass cutting machine, easy and convenient to operate, no electricity, no dust, no noise, easy to do the cutting of floor tiles, tiles and glass even indoors..
  • 【Sturdy structure】: Thickened and thickened knife bar with six sides, not easy to deformation, with steel scale (starting scale: 8 cm), computer laser engraved scale, minimum accuracy of 1 mm, clearly visible, accurate and error-free, scale is not easy to blur..
  • 【 Automatic oiling system】: Automatic oiling when in use, stop oiling when not in use. (Be sure to fill the oil pot with kerosene before use, so as not to damage the cutter head with the glass).
  • 【High-quality durable cutter wheel】: Support 3-12 mm thickness of glass, tile cutting, the maximum cutting width of 120 cm / 47.24 inches (strictly prohibited to hit the cutter wheel).
  • 【Nylon pulley】: Extra-long T-type glass knife knife seat with 20 nylon pulley, fully enclosed precision bearings, rust-proof, cutting process does not jump, smooth sliding, nylon pulley, durable, the use of ordinary ABS material pulley 3 times..
Check Stock

Scientific Cutting Tools (SCT) - MS33649-11S - Port Tool, Carbide Tipped, 1 in-12 Port Thread Size, UNJF

  • All copper AC electric motor, stable operation.Please do not test the capacity of this machine with steel bars exceeding the size and hardness.
  • High efficiency, cut off time 2-3 seconds.Before cutting the steel bar. The position of the screw must be adjusted.
  • Large factory products, high quality.Regular replacement of the blade position, a pair of cutter heads can be used on all four sides, cut 1000 times per side.
  • Cut off without sparks, no dust, safer. Clean the motor commutator once a month and clean it with an air gun. And check the carbon brush.
  • A variety of models to choose, more convenient. After the machine has been cut 70 times in a row, wait for the machine to cool before using it.
Check Stock

Cutting Wheel Set for Rotary Tool 36pcs High speed steel circular saw blade,Toolman Set Includes: 10PC Diamond Cutte, Compatible with dewalt, makita, ryob,and skill bosch.

  • Resin Cutting wheels are suitable for cutting metal. Do not use too much force when installing the resin cutting disc..
  • The wood cutting saw blade discs are made of high speed steel and suitable for cutting wood, plastic, copper, laminate and aluminum..
  • Diamond Cutting Blade are suitable for cutting gems, glass and ceramics..
  • Compatible with most rotary tools. Ideal for DIY projects..
  • Set Includes: 10PC Diamond Cutter (22mm), 2PC Diamond Cutter Rod 3.17mm, 10PCs resin cutter (32mm), 2pcs grit bar 3.17mm, 2pc saw blade supporting bar, rod dia: 6mm, 3.17mm, 6pcs High speed steel circular saw blade Outer diameter: 22,25,32,35,44,50 mm.
Check Stock