Reviews Steel Band Clamps

Non-Stripping 1 inch Hose Clamp Size#10 Wide Higher Torque Heavy Duty 5/8 to 1-1/16 Adjustable Worm Gear Hose Clamps Stainless Steel 304 Pipe Tubing Clamps Heater Hose Clamps 3/4 and 5/8 20Pack

  • Why Non-Stripping: Our hose clamp band material is thick and non-perforated. The other typical 1" hose clamps are thin and perforated which's easy to deform and strip the perforations if the screw clamp is over-torqued. Our screws are much bigger and with deeper threads that grip the embossed band tightly. The buckle bottom is welded into one-piece housing for higher tensile strength. These heavy duty hose clamps can provide superior clamping force for solid & safe seal!.
  • Rolled Band Edge Protection: As our 3rd picture, the rolled-up band is effective to prevent the metal edge cutting into the soft hoses, no matter for silicone, pvc or rubber hose. This is an important and safe design for worm drive hose clamps to eliminate the damage to hoses during installation and final torquing, especially for heater silicone hose and automotive applications..
  • Non-Perforated Band Stronger: Compared with perforated band, our non-perforated solid band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of screw clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding (like "cheese-grater" making you hard to remove the tubing clamps out of ....
Check Stock

ROADFAR CV Joint Boot Kit Inner 1999-2005 for Polaris Sportsman 500 700

  • ☛ 1, 【Brand Advantage 】----- Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • ☛ 2, 【With 8Pcs CV Boot Clamp】 ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • ☛ 3, 【With 2Pcs CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • ☛ 4, 【Easy To Use】 ----- Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding ....
Check Stock

Squirrelly 4 Inch Heavy Duty Stainless Steel with Rounded Band Edges T-Bolt Clamp Turbo Intake Soft Hose Intercooler

  • Tired of your intercooler piping blowing off? Upgrade to these Heavy Duty Stainless Steel T-bolt Clamps and leave those old worm clamps in the dust..
  • Our T Bolt clamps are made from heavy duty 304 stainless steel with rounded band edges to protect soft hose materials from cuts..
  • These high quality T-Bolt Band Clamps provide high tensile strength, durability, and are corrosion resistance..
  • Clamp sizing: 104mm-112mm // 4.09" - 4.40". Fits 4" outside diameter..
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

Squirrelly 3 Inch Heavy Duty Stainless Steel with Rounded Band Edges High Quality T-Bolt Soft Hose Clamp Silicone Turbo Intercooler Pack of 4

  • Tired of your intercooler piping blowing off? Upgrade to these Heavy Duty Stainless Steel T-bolt Clamps and leave those old worm clamps in the dust..
  • Our T Bolt clamps are made from heavy duty 304 stainless steel with rounded band edges to protect soft hose materials from cuts..
  • These high quality T-Bolt Band Clamps provide high tensile strength, durability, and are corrosion resistance..
  • T-Bolt clamp measurement: Largest 87mm / Smallest 79mm..
Check Stock

Adjustable House Clamp 304 Stainless Steel, 14.7 FT Duct Metal Strapping with Holes + 10 Stronger Fasteners, Large Worm Gear Hose Clamps Band Clamps for Pipe Plumbing Mechanical Applications

  • [Any size hose clamps Assortment Kit] Do you sometimes need an odd-sized hose clamp, especially one that would be bigger than you would normally use? If so, this is the hose clamps assortment kit for you, with this kit you custom-cut your own clamps when and as you need them. No more ill-assorted collections of mostly wrong-size clamps that are usually too big or too small for your needs with no bulky, wasted material..
  • [Package Include] The hose clamp kit includes 0.5’’ X 14.76 FT stainless steel strapping bands, and 10 pcs fasteners in total. They can be adjustable for most clamp and securing situations. Moreover, very strong good quality 304 stainless steel will not rusty for a long time..
  • [How to Use] Before using, prepare plier for cut the hose clamps, and a small flat bladed screwdriver. Then, test feed the direction of the band before crimping the screw end on by feeding in, screwing, making sure it is not locking up after few turns. The band will work smoothly and is tightened by a screw with threads of the screw engaging the slots in the band, if put together proper way. Once you get screw clamp part mounted on the band, just measure how long you need i....
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • ...p Pliers : Use with any banding up to 2/5-inch (10mm) in width.
  • Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the desired length ....
Check Stock

Stainless Steel Band Hose Clamps Ideal Tridon #16 10 Pcs 1 Box (11/16\ TO 1-1/2\) Made in USA

  • 10 PIECES 1 box #16 Hose Clamps Stainless Steel Band (11/16" to 1-1/2").
Check Stock

BAND-IT CP3119 3/8\ Wide x 0.025\ Thick 1-3/8\ Diameter, Galvanized Carbon Steel Center Punch Clamp (100 Per Box)

  • Galvanized carbon steel band offers medium strength with medium corrosion resistance to mild chemicals and occasional fresh water.
  • Center Punch clamps use a punch style clamp for economy and ease of installation.
  • For general plant maintenance or emergency field repairs.
  • BAND-IT Center Punch Clamps are constructed with a double wrap of band material which increases the holding power of clamped assemblies.
  • Center Punch Clamps can be installed with BAND-IT hand tools: S03869, or T30069, or pneumatic production tool: SM1700.
Check Stock