Reviews Steel Anchor Bolt Kit

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock

ENO, Eagles Nest Outfitters Deluxe Hammock Hanging Kit, Take Your Hammock Inside, Charcoal

  • Bring the outdoors in: When you have the hammock itch, but the weather is crummy, create your own relaxation station inside with the Deluxe Hammock Hanging Kit.
  • Master the art of lounging: Simply install the 2 anchor bolt hangers with the lag screws and washers to the wall studs.
  • Clip your hammock (not included) to the hangers and let the relaxing begin.
  • Trustworthy material: Falling is not an option, unless it's to sleep.
  • The Indoor Hanging Kit features sturdy 6061 anodized aluminum hardware and is designed to support up to 250 pounds.
  • The full hanging experience: Every kit includes 2 anchor bolt hangers, 2 lag screws, 2 washers, 4 bolts and a detailed installation guide.
  • ENO gives back: ENO loves the outdoors and shows it by donating to organizations that preserve our wild places.
Check Stock

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8\ to 2-1/2\ Grip Range, For 3/8\-16 UNC Fastener Size (Pack of 25)

  • Practical Kit: Zinc plated steel round head is used for hanging and fixing heavy objects. It is easy to use and bring more convenience to your life.
  • Premium Material: This toggle bolt and wing nut kit is made of high quality zinc plated steel which is strong and sturdy and offers good corrosion resistance and rust resistance in bad environment like high temperature, cold weather, and high humidity areas.
  • Wide compatibility: Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches.
  • Three Sizes: We have prepared 3 sizes of toggle bolt and wing nut kit, a complete kit, for you to meet different needs in your daily life.
  • What You Get: 1/8inch: 8pcs, 3/16inch: 8pcs, 1/4inch: 8Pcs, Lenink butterfly screws anchor drywall provide you with a more convenient driling way. Please feel free to contact us if you have any problem.
Check Stock

Glarks 42Pcs 6 Size Heavy Duty Zinc Plated Steel Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit for Drywall Plaster and Tile

  • ★【Product Type】: High quality heavy duty molly bolt drive hollow drive wall anchor screws kit..
  • ★【Package】: In this kit, it include 6 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm, 6x65mm total 42pcs packed in a durable plastic box, convenient for your use and storage..
  • ★【Material】: They are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, strong and durable enough for you to hanging items..
  • ★【Feature】: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety..
  • ★【Application】: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

Glarks 60Pcs Heavy Duty 1/8 inch 35/46/59mm Zinc Plated Steel Molly Bolt Drive Hollow Drive Wall Anchor Screws Assortment Kit

  • ♛ Product Type: High quality heavy duty molly bolt drive hollow drive wall anchor screws assortment kit..
  • ♛ Package: In this kit, it include 3 size of 1/8SDx35mm, 1/8SDx46mm, 1/8SLDx59mm each for 20pcs, total 60pcs drive wall anchors packed in a durable plastic box, convenient for your use and storage..
  • ♛ Quality: All the anchors are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items..
  • ♛ Feature: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety..
  • ♛ Application: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

Lag Bolt Kit for Mounting TV Bracket Into Wood or Concrete Wall Heavy Duty Bolts Anchors and 2 Drill Bits

  • Application: The lag bolt kit fit for concrete wall, wood studs and brick wall.
  • Material: High quality plastic anchor, Zinc plated lag screws and alloy steel drill bits.
  • Package: The kit includes 4 lag screws, 4 concrete anchors, 4 washers,2 kinds of drill bits.
  • Note: Concrete anchors are not compatible with wood and drywall.
Check Stock

2 Pcs 10mm Screw Pin Anchor Shackle 3/8 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 2 Pcs 3/8"(10mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 22mm, Working Load Limit: 2000lbs, Breaking Load: 8000lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

1 Pcs 12mm Screw Pin Anchor Shackle 1/2 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 1 Pcs 1/2"(12mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 1" (25mm), Working Load Limit: 1400kg / 3086lbs, Breaking Load: 5500kg / 12125lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

NAXEN 26kN Bolt Hanger Stainless Steel Climbing Hanger Climbing Anchor for 10 mm / 3/8 Bolt Pack of 6

  • Durable Hanger. With stainless steel and vibrated polished, the climbing anchor features corrosion resistant..
  • Sturdy Anchor. The bolt hanger is rated at 26kN, which offers a safe connection point for you..
  • Rounded Edges Design. The clever design offers anti-wear effect when clip carabiner or other gear on the bolt..
  • Large Open. The wide connection hole design facilitates carabiner or any other gears clipping..
  • Available Bolt Diameter: 10 mm / 3/8 in..
Check Stock

TRX Training XMount Mounting Anchor Suspension Trainers V4 Training Club App, Grey

  • SUSPENSION-TRAINER WALL ANCHOR: This is the ultimate anchor for full range of motion. This anchor secures to your ceiling or wall for maximum stability. It’s a great permanent wall hanging kit..
  • WHAT’S IN THE BOX: This wall anchor kit comes complete with 2 bolts for mounting. The unique X design allows you to hang multiple straps. The durable powder-coated steel is indoor- and outdoor-ready, and the plastic backing reduces nicks and scratches..
  • EASY INSTALLATION: This kit mounts to any load-bearing wall or ceiling stud with the included bolts. It can be set up inside or outside, and the powder-coated steel makes it low key. You can transform any space into a training environment!.
  • FOR ALL FITNESS LEVELS: We have a suspension training system for everyone, and our exercise accessories can perform in the gym or at home. Whether you’re a seasoned pro, a beginner, or ....
Check Stock