Reviews Standard Spark Plug

Lisle 50850 Ignition Spark Tester

  • A handy tool to check ignition spark without removing the spark plug..
  • The tool is specially calibrated to measure ignition voltage..
  • Works on both standard and electronic ignition systems. Easy to use..
  • Simply adjust calibration screw to proper gap size..
  • Attach spark plug wire to end of tester..
  • Clamp tester on engine to ground. Crank engine and check for spark..
Check Stock

LOGOL 5/8' Swivel Magnetic Spark Plug Socket，3/8' Drive , Enhanced Magnetic Design With Thin Wall Socket ，Cr-V Steel

  • GOOD COMPATIBILITY:Use advanced 12-point design,standard is 6-point, so thinner than standard spark plug sockets, and it fits perfect and good compatibility.
  • QUALITY MATERIALS:Made of heat-treated chrome vanadium alloy steel which features chrome plating for superior durability.
  • EASY TO CHANGE SPARK PLUGS：The interior magnet effectively retains and protects the spark plug for easier removal and installation. not easy to loose the plug when installing/removing, more easy and efficient.
  • YMUST HAVE：360 degree swivel action for maximum flexibility in a tight area.
  • RISK-FREE :Meet & Exceeds ANSI (The American National Standard Institute) and backed by our Lifetime Limited Warranty for your complete peace of mind.
Check Stock

KIMISS 2Pcs Spark Plug Re-thread Tap,Carbon Steel Spark Plug Thread Insert Tap Set M101.0 / M121.25 M141.5 / M181.5 Black

  • Carbon steel material ----------- The spark plug threaded joint is made of high quality carbon steel material, which is scratch-resistant,....
  • Product function ----------- The spark plug thread insertion tap repair tool is used to repair the damaged spark plug installation thread, is a good....
  • Product size ------- The small faucet size of the spark plug threaded joint: M10 * 1.0 / M12 * 1.25, large faucet size: M14 * 1.5 / M18 * 1.5, easy to....
  • Professional production -------- The spark plug threaded joint is professionally produced, meets the standard specifications, stable performance, high....
  • Note--------- Please refer to the description for detailed product parameters..
Check Stock

PAGOW Spark Plug Boot Wire Removal Tool Ignition Coil Puller for Volkswagenn Audi VW Hand Install Repair Tool

  • Best Compatibility: The spark plug wire puller installer can perfect match with Volkswagen and Audi vehicles with standard prong plug caps on each side (not recommended for non-VW/Audi plug leads). Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD)..
  • Size Inforamtion: The size of spark plug boot removal tool kit: 12.6inch (32cm) overall length, 3.75inch x 0.4inch x 1.2inch (9.5cm x 1cm x 3cm) handle, 9.25inch (23.5cm) shaft, 2.2inch x 0.8inch (5.6cm x 2cm) boot end..
  • Wide Applications: The spark plug puller tool suitable for Bora, Mercedes, Smart, and other Volkswagen and Audi vehicles with similar engines and standard prong plug caps on each side..
  • Easy to Use:Perform spark plug change when engine is cold to prevent the heads from stripping. After pulling the plugs, we recommend applying lubrication to make the job easier. When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck..
  • Material:The handle of ignition coil puller is made of hard p....
Check Stock

BOSCH (FIX 7828 Professional Compression Tester

  • Measures cylinder compression to accurately diagnose engine condition.
  • Compatible with most standard spark plug threads.
  • Quick disconnect coupler separates hose from gauge for faster, easier connections to the engine.
  • Push button side release valve allows repeated testing without disconnecting.
  • Includes adapters for most standard spark plug threads: 10mm, 12mm, 14mm, 4mm long reach, 18mm.
Check Stock

Briggs & Stratton 5062K Spark Plug Platinum

  • Replaces Briggs & Stratton Service Part #802592S.
  • Extended Life Series Version of Standard Spark Plug #802592S/5095H.
Check Stock

AloneGoer 2pcs DPR8EA-9 Spark Plug Compatible with stk 4929 5083 98069-58916 TRX300 TRX300FW GL1100 GL1200 GOLD WING Yamaha 94700-00241 XT600 XV1900 XVZ1200

  • DPR8EA9 (4929) Spark Plug Compatible with CBR600F (1987-1989).
  • Spark Plug for Goldwing 1100-1200 (1982-1984).
  • Spark Plug for Interceptor 700-750 (1984-1991).
  • Spark Plug for Nighthawk 450-650 (1983-1986).
  • Spark Plug for Magna 700, 750 (1984-1995).
  • Spark Plug for Shadow ACE 750 (1998-2000).
  • Spark Plug for Shadow VLX 600 (2002-2007).
  • Spark Plug for Shadow 500-750 (1983-1986).
  • Spark Plug for Shadow ACE 750 (2000-2003).
  • Spark Plug for Shadow VLX 600 (1988-2001).
  • Spark Plug for Kawasaki KLR650 (1993-2009).
  • Spark Plug for Kawasaki Ninja 750R (1990).
  • Spark Plug for Kawasaki Voyager XII ZG1200B (1998-2003).
  • Spark Plug for Suzuki S40-S50 Boulevard (2007-2009).
  • Spark Plug for VS1400GLP Intruder (1991-1996).
Check Stock

LOGOL 14mm Swivel Magnetic Spark Plug Socket,3/8-Inch Drive x 12" Total Length,12-Point Thin Wall Socket With Enhanced Magnetic Design for BMW,Mini,Nissan and More

  • GOOD COMPATIBILITY:Use advanced 12-point design,standard is 6-point, so thinner than standard spark plug sockets, and it fits perfect and good compatibility.
  • QUALITY MATERIALS:Made of heat-treated chrome vanadium alloy steel which features chrome plating for superior durability.
  • EASY TO CHANGE SPARK PLUGS：The interior magnet effectively retains and protects the spark plug for easier removal and installation. not easy to loose the plug when installing/removing, more easy and efficient.
  • YMUST HAVE：360 degree swivel action for maximum flexibility in a tight area.
  • RISK-FREE :Meet & Exceeds ANSI (The American National Standard Institute) and backed by our Lifetime Limited Warranty for your complete peace of mind.
Check Stock

ARES 11017-14mm 3/8-inch Drive Thin Wall Magnetic Spark Plug Socket - 12-Point Design For Enhanced Grip and Fit - Walls 2mm Thinner Than Standard Spark Plug Sockets

  • SPECIFICATIONS: This ARES 14mm Thin Wall Magnetic Spark Plug Socket is 3/8-inch drive and features walls that are only 17.7mm thick compared to the 19.7mm thickness found on standard 6-point spark plug sockets. Constructed of durable, heat treated Chrome Vanadium Steel, this socket also features a mirror polish finish for easy cleanup and a professional look with high visibility markings for easy identification..
  • DESIGN: The socket's interior magnet retains and protects the spark plug for easier installation, and the 12-point design allows for enhanced gripping power and fit..
  • MADE TO LAST: The interior magnet in this socket won't wear out over time like traditional rubber gaskets, so this spark plug socket can provide years of reliable use. This spark plug socket meets and exceeds ANSI/ASME standards..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Magnetic Spark Plug Socket, simply contact customer service for troubleshooting help, parts, replacement, or refund..
Check Stock

ZKTOOL 14mm Spark Plug Socket Magnetic 3/8-inch Drive 12 Point 1mm Thin Wall Spark Plug Socket Compatible with BMW Nissan (14MM)…

  • Specifications: ZKTOOL 3/8-inch driver 14 mm thin-walled magnetic rotating spark plug socket adopts a 12-point design, and its wall thickness is 17.7mm, which is easier to use than the 19.7mm wall of a standard 6-point spark plug socket..
  • Easy to use:This magnetic spark plug socket is made of high-quality chrome vanadium steel. At the same time, there are a large number of powerful magnets at both ends. The rotating head can firmly grasp the ratchet to fix, and the top can attract the spark plug to ensure that it is firmly fixed in place during installation and disassembly. Don't worry about losing the spark plug..
  • High quality: Made of high-quality chrome vanadium steel, the surface is polished, and the chrome-plated mirror surface can maximize the wear life and prevent rust and corrosion..
  • application: compatible with BMW 1 series (E81/E87-N43B) and 3 series (E90-N43B). 5 series (E60-N43B) and Nissan engines and various MINI vehicles such as R55, R56, R57 and R60..
  • Lifetime Warranty: ZKTOOL offer lifetime warranty, we will refund or replace, if the product have any quality p....
Check Stock