Reviews Stainless Steel Quick Disconnect

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

Brazing and Soldering Kit

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for B acetylene cylinders.
Check Stock

PERA 2 Pair Pin Lock coupler MFL 2 Gas & 2 Liquid Quick Disconnects Set

  • Packing: Pin Lock Gas Disconnect MFL 1/4”(2PCS) , Pin Lock Liquid Disconnect MFL 1/4” (2PCS).
  • Material: PBT Material for Pin Lock Quick Disconnect Body and Stainless Steel for Threaded End.
  • Use: The Pin Lock MFL Disconnects used for Cornelius style Pin Lock keg (Coke), Works for Beer or Soda.
  • A Perfect Gift for Home Brewing and Wine Making Lovers.
  • Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement free..
Check Stock

Homebrew Pin Lock Disconnect Pin Lock Barb Quick Disconnect with Free Hose Clamp for Draft Beer Keg System

  • 1.Include: Pin Lock Gas Disconnect Barb type (3 pcs), Pin Lock Liquid Disconnect Barb type (3 pcs), Worm Clamps 6 pcs.
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Worm Clamps.
  • 3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 3/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
  • 4.Use: The Pin Lock Barb Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..
Check Stock

Universal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring

  • Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
  • Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
  • Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
  • Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
  • Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....
Check Stock

MAGMA Products T10-680 Dual Extended Horizontal Round Rail Mount 1 Rails Multi One Size

  • Round rail, quick-disconnect, mounting bracket is made entirely of 18-8 stainless steel and 356 hard anodized aluminum.
  • Allows mounting of Gourmet Series and Connoisseur Series Grills out over the water.
  • Quick-disconnect system allows quick disassembly leaving no hardware on the rail.
  • Fasteners for attaching this mount to any Magma Rectangular Grill or Dual (DM) Filet Table/ Cleaning Station are included with those products, grill....
Check Stock

TMCRAFT 1.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing

  • STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
  • PORTABLE: 1.6 Gallon capacity can be stored and taken anywhere. Measures 8.9"L x 8.9"W x 11.1"H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
  • BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
  • RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..
Check Stock

LUCKEG Homebrew Pin Lock Disconnect Pin Lock MFL Quick Disconnect with Swivel Nut and Free Hose Clamp for Draft Beer Keg System

  • 1.Include: Pin Lock Gas Disconnect MFL type with 5/16" swivel nuts (3 pcs), Pin Lock Liquid Disconnect MFL type with 3/16" swivel nuts (3 pcs), Worm....
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Swivel Nuts and Worm Clamps.
  • 3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 5/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
  • 4.Use: The Pin Lock MFL Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..
Check Stock

HK Paintball Airsoft Fill Whip Hose Extension 4500 Psi PCP, 36 inch Stainless Steel Air Fill Station & Charging System with Universal Quick-Disconnect Plug Adapter

  • Stainless Steel Material Support High Pressure : The braided stainless steel adapter support 4500 psi high pressure with 36 inch length,and the surface is polished plating, very strong and beautiful..
  • Universally Fit : The charging system extends the line from your tank to the re-fill station, which have 8mm quick release male plug and female socket on the end..
  • Advantage : We offer the 8mm quick disconnect adapter double male fill nipple that you can easy to connect with your existing fill valve/regulator..
  • Easy to use and install : Suitable for compressed air tank up to 4500 PSI. Our products are made of high quality materials, thick and durable, not easy to age, long service life..
  • Package including : 1* Paintball Airsoft Fill Whip Hose, 1* Quick Disconnect Adaptor Double Male Fill Nipple, 2* Gaskets..
Check Stock

TMCRAFT 2.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing(10L)

  • STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
  • PORTABLE: 2.6 Gallon capacity can be stored and taken anywhere. Measures 8.9″L x 8.9″W x 14.6″H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
  • BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
  • RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..
Check Stock