Reviews Stainless Steel Hanging Wheels

Makita 10 Pack - 4 Inch Cut Off Wheels For 4' Grinders - Aggressive Cutting For Metal & Stainless Steel

  • ✅ 10 MAKITA Premium 4” Flat Type 1 Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-Inch x .045-Inch x 5/8-Inch | Optimized for Makita 4 Inch Angle Grinders and compatible with All 4” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, ....
Check Stock

Makita 5 Pack - 4.5\ Cut Off Wheels For 4.5\ Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2\ x .045\ x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION....
Check Stock

Raybee Clothes Rack Heavy Duty Clothing Racks for Hanging Clothes 450 lbs Capacity Hanging Clothes Rack Commercial Rolling Clothes Rack Industrial Clothing Rack on Wheels ,Chrome

  • ...r indoor and outdoor use, you can use this industrial clothing rack in the bedroom , living room , bathroom, balcony, commercial performance,waterproof and dust proof, metal clothes rack will meet your different needs..
  • 【Sturdy & Durable Heavy Duty Clothing rack】Clothes rack with wheels is made of solid & sturdy stainless steel, can hold up 450 lbs.( the top hanging rods holds up to 260 LBS when not moving. 190 lbs on the bottom shelves for shoes and luggage storage). Premium gauge chrome finish to enhance its protection against water, rust, corrosion & scratch..
  • 【Garment Rack Heavy Duty Fit Your Space】Heavy duty clothing racks on wheels dimension: 51.18-75" L x 21.7" W x 65-70" H. The extensible horizontal rod of rolling clothes rack from 51.2" to 75" provides more space than ordinary single hanging clothes rack. Height adjustable from 65.7" to 70.8" accommodates short and long garments. You can adjust the length and height of rods to meet your space needs..
  • 【Collapsible & Rolling Clothes Rack】Collapsible design for folding the industrial clothing rack heavy duty flat to save space or easy its transports when not in use. Heavy duty omnidirectional wheels for commercial garment rack,ensure flexible movement,smoothly across any flooring. 2 lo....
Check Stock

Hamper Stand, 30 gal, no Bag

  • [Heavy-Duty Large Industrial Laundry Cart]-Graywlof Laundry Rolling Cart, size: 35.4"Lx25.6"WX31.5"H, capacity of 11.35 bushels (400L), 105 gallons，bearing capacity of 260 lbs (120Kg).
  • [Sturdy Stainless Steel Laundry Basket]-Graywlof industrial household laundry basket cart is made of waterproof Oxford cloth (moisture-proof) and stainless steel (durable). The bottom has 4 4-inch wheels. The large opening and deep basket are very suitable for putting clothes, towels, and blankets. Delivery of sheets and quilts to the laundry room.Also great for grocery storage and shipping.
  • [Easy to Move]-Rolling laundry basket has four smooth 4-inch silent wheels at the bottom, including 2 Fixed wheel and 2 Swivel wheels. The laundry cart can move smoothly on carpets, tile floors, and cement floors..
  • [Waterproof and Anti-rust]-laundry cart with wheels Equipped with a removable stainless steel frame and waterproof Oxford cloth lining, wear-resistant, easy to store, 10 metal hooks to prevent the lining from moving.Easy to assemble.
  • [Wide Use]-Very suitable for hotels, apartments, homes, hospitals, rehabilitation centers, nursing homes, correctional facilities, schools, shelters, libraries, humanities and society, beauty salons, barber shops, etc..
Check Stock

Cooks Standard Multi-Ply Clad Cookware Set 10 Piece Silver

  • Set Includes: 1.5 quart with stainless steel lid, 3 quart saucepans with stainless steel lid, 8 quart stock pot with stainless steel lid, steamer insert with stainless steel lid, 8 and 10-inch fry pans.
  • Sturdy Construction: The cookware is made of high-grade stainless steel, these pots and pans are all clad with 18/10 stainless steel interior/exterior with an aluminum core throughout.
  • Even and Quick Heating: Aluminum core for even/quick heat distribution with excellent heat conduction, more even heat distribution reduces hot spots that can burn foods, allowing the cooking progress more efficient.
  • Cool Handle and ventilative Lid: Comfortable soft-touch handles stay cool during use , secure-fitting lids trap in heat/moisture to seal flavor.
  • Easy to clean: Stainless steel body for easy cooking and cleaning，After cleaning, hanging the pan to dry and store with its hanging hole, also is a convenient choice. Dishwasher safe.
Check Stock

Pelican Air 1626 Case - no Foam (Black)

  • Features super-light proprietary HPX polymer automatic purge valve - keeps water and dust out while balancing Air pressure quiet rolling stainless-steel bearing wheels retractable extension handle.
  • Crushproof dustproof with a watertight O-ring gasket and an automatic purge valve that balances Air pressure inside the case.
  • DIMENSIONS Exterior (LxW×D) 31 12 x 17 05 x 13 33 inches Interior (L×W×D) 28 14 x 14 10 x 11 72 inches.
  • Features rolling stainless steel bearing wheels extending trolley handle double-throw latches stainless steel hasps rubber overmolded handles and a card holder for front or side placement.
Check Stock

Cut Off Wheels 4-1/2 ,PRETEC 50+5 Pack Metal Cutting Wheel,Thin 4.5” Metal & Stainless Steel Fast Cutting Discs for Angle Grinder - 7/8 Arbor Hole

  • ...ically manufactured from corundum and white alundum grain that provides high hardness, durability and abrasion resistance,extend die grinder cut off wheel the service life..
  • 【Sharp & Clean Cutting】Cutting discs 0.04 inch ultra thin design for fast burr free and stable cutting. Make fast, clean cuts in steel, stainless and other ferrous metals with these abrasive cut-off wheels. Promot the heat dissipation of the cutting blade during work, avoid metal thermal burns. Performance with minimal material loss, make the cutting project more precise and efficient..
  • 【Professional Cutting Wheel】PRETEC Cutting wheels obtained CE,ISO certification.Help you better cut stainless steel, aluminum alloy, cast iron, carbon steel and general-purpose metal..
  • 【 Multiple Ueses】Cut off wheels 4 1/2 inch are designed for cutting steel, iron, plastic,fiberglass,stainless steel including rebar, steel pipe, sheet metal, structural tubing..
Check Stock

YOSE Hammock Hanging kit,360°Rotating 1200 lb Capacity Heavy Duty,Hanger & Swing Hook Snap for Concrete Wood,Hammock,Veranda Seat,Chair,Swing Sets,Yoga and Gym（Without Chain ）

  • 1.Good material: hammock hanging kit is made of high quality 304 stainless steel, Load Capacity 1000LB, all parts made of high quality 304 stainless steel, no rust, corrosion resistance strong enough and high hardness to ensure safety use,perfect for Hammocks, Chairs, Beds, Baskets, Furniture, Swings ect.hammock hanging kit,hammock chair hanging kit.
  • 2.Easy to install,come with 2 expansion bolts, 2 wood screws and a snap hook, item with 2 bolts which fit concrete application and 2 screws which fit wood application.the swing ring can be detached, even if your chain, rope or connecting buckle is closed, it can be connected, so it can be easily connected to items such as the hammock, swing chair or sandbag that you need to hang.hanging chair hardware.
  • 3.Package include: 1 x Stainless Steel Hammock Hanging Kit, 2 x Stainless screws, 2 x Stainless bolts and 1 x hook ups.hammock kit,swing hanging kit,hammock hooks heavy duty,hammock hooks.
  • 4.The swivel hook allows 360° rotated freely swing. It prevents tangling or twisting. The innovative design ensures wider and more flexible use.porch swing hanging kit,hammock hook.
  • 5.Our hammock hanging kit have undergone strict quality inspections. If you find any dissatisfaction during receipt and use of the product, ple....
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702

  • ..., Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of Rotary Cutting Tools, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 80-18100 for optimal results. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010.
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting wheels which are 1 3/4 inch in diameter and 1/32-inch-thick with a center hole of 1/8 inch, with a maximum speed of 42,000 RPM. and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

GRIDMANN Stainless Steel Table 72 in x 30 in NSF Commercial Kitchen Prep & Work Table w/ Backsplash and Wheels

  • Heavy-duty work table: GRIDMANN's stainless steel table features an 18-gauge #430 SS table top and measures 72" Long x 30" Deep x 34-1/2" High with a 1-1/4" backsplash. This prep and work table is ideal for use in commercial and industrial applications..
  • NSF Certified: Designed to meet the highest regulatory requirements for safety and durability in commercial kitchens. NSF Model #: GR10-WT7230SB+CT4W.
  • Adjustable height under-shelf: Durable and adjustable, the heavy-duty galvanized steel under-shelf on this prep table can support additional equipment, pots and pans, and supplies..
  • Versatile design: The front and back of this stainless steel workbench are designed with rounded edges to maximize working comfort. This table can be used in restaurants, hotels, or at home in the kitchen or garage..
  • Adjustable height, non-marring feet and 4 caster wheels: Adjustable bullet feet keep the stainless steel table sturdily in place, while protecting floors from denting and scratching. The feet adjust up to 1" to eliminate table wobble. A set of 4, non-marring caster wheels are also included. These wheels work on almost any surface and two of the wheels lock down to keep your table in place..
Check Stock