Reviews Stainless Steel Grid Grid
American Standard 7433000.075 2-Pack 13.39-in x 16.06-in Sink Grids, Stainless Steel
- Sink grid designed to fit the Danville offset double bowl sink #18CR.312000S.075.
- 2-Pack of Stainless steel grids with feet and bumpers.
- Size: left bowl grid: 16.06L x 13.39W, right bowl grid: 14.17L x 10.63W.
Check StockHongso SCD911 Universal Stainless Steel Wire Cooking Grid Grate Replacement for Viking VGBQ 30 in T Series VGBQ 41 in T Series VGBQ 53 in T Series
- We have upgraded our material to 100% food-grade SUS 304 stainless steel since 2016! 7 mm in diameter..
- Dimensions: 23 1/4" x 11 1/2", Material: Stainless Steel Wire.
- Hongso Stainless Steel Wire Cooking Grid Replacement for Viking VGBQ 30 in T series, VGBQ 41 in T series, VGBQ 53 in T series.
- Make sure you measure the size of your original parts and compare with ours BEFORE you order.
- Stainless steel cooking grate is designed to last longer and work better than your original barbecue grid. When grill grid becomes worn out and rusty,....
Check StockARLBA Kitchen Sink Protectors for Kitchen Sink W/Rear Drain Hole,304 Stainless Steel Sink Grid 16x13,Metal Sink Mat Sink Grate Protector Sink Rack for Bottom of Sink w/Sink Strainers & Rubber Feet
- ✅【Stainless Steel Sink Protectors for Kitchen Sink】- The ARLBA Stainless Steel Sink Bottom Protective Grids (Size: ,13″x16″ ) with protective rubber feet and bumpers not only protect the bottom of your sink from scratches and damage by pots, pans, plates, silverware, glasses, and so on, but also be used as an in-sink drying rack for tableware, vegetables ,fruits ,glassware, utensils and pans .Open grid design allows water to drain while in use. Ideal for kitchen, bathroom, and laundry room sinks..
- ✅【304 stainless steel Sink Grates Sink Mat】- This premium-quality sink grids are Made of food-grade 304 stainless steel, can be in direct contact with food, They are resistant to corrosion and rust,strong sturdy and durable. The welds are clean and splatter-free and the wire ends are ground smooth .It is more durable and lasts longer than silicone sink mats.
- ✅【Multifunctional Sink Rack for Bottom of Sink 】 – Our Sink Bottom grid of kitchen sink with rear drain position can improve drainage in your sink, which can allow water to flow away freely underneath your dishes and cutlery. These sink grid can meet your different needs : Not only can you use it to dry dishes, vegetables and fruits, but you can also use the sink protector as a k....
Check StockMONSINTA Kitchen Sink Grid and Sink Protectors, Stainless Steel Sink Grids for Bottom of Kitchen Sink, 26' x 14' with Rear Drain for Single Sink Bowl
- Stainless Steel Sink Grid Dimension: 26″ X 14 1/16″..
- Sink Protector with Rear Drain Location..
- Kitchen Sink Grate, Sink Grid, Stainless Steel Construction..
- Sink Bottom Grid, Sink Grate as Drying Rack For Glassware and Crockery..
- Sink Grids for Single Bowl Kitchen Sinks..
Check StockSoleil SSGR-FC64 60/40 Double Bowl Fireclay Kitchen Sink Grid Set in Brushed Stainless Steel
- INCLUDED COMPONENTS | Sink Grid, Protective Feet and Bumpers.
- OVERALL DIMENSIONS | Length: 15.16" | Width: 14.37" | Depth: 0.94".
- PROTECTIVE FEATURES | Tiny feet keep the stainless steel grid from sitting flush against the sink bowl, while protective bumpers prevent the sink basin from scratching.
- MULTIPURPOSE | The open grate of the grid offers ideal drainage during clean up, but also doubles as a drying rack for pots and pans.
- DURABILITY | Stainless steel composition makes each basin rack resistant to rust, scratches and spots through years of use.
Check StockSerene Valley Sink Bottom Grid 26-15/16\ X 14-1/16\
- IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you..
- Grid dimension: 26-15/16" X 14-1/16" for your sink bottom with Corner Radius 2"..
- 304 Premium stainless steel to ensure durability and rust-free with limited life warranty and protect your kitchen sink from daily wear..
- Please refer to the video shown at the bottom of the product picture display for more detailed info on measuring your sink to fit our grid. This info is VERY important and could save you a lot of time if ordering a wrong grid can be avoided..
Check StockBroil King Gas Grill Stainless Cooking Grid Handler and Lifter
- EASY TO OPERATE - The grid gripper is easy to lift the grate. It is useful for Big Green Egg, Weber, Primo, LifeSmart, Kamado Joe etc. smokers..
- RUSTPROOF STAINLESS-STEEL MATERIAL - This grate lifter is made of rustproof steel, tough and durable.
- does not deform. Stainless-steel grid gripper is your best choice for health and environmental protection. Gloves are recommended for high temperature operation..
- EASY TO LIFT HOT/GREASE GRATE/GRID/PLATE -A necessary grill accessory, the grid gripper is good to clamp hot cooking things. You can easily pick up the grate, etc., in just one hand with it. Please keep kids far away for safety..
- CONVENIENT STORAGE - You can hang it onto your grill with the additional hook while BBQing. You can easily store it after cooking too, hanging it anywhere you want. Remember to dry it before you put it into a drawer or box..
- WIDELY USED AND CONVENIENT - You can use it to lift the hot grate, bowl, dish, plate or roasting pan from grill, oven, pressure cooker, microwave etc. Pick up hot soup or extremely hot plates with ease.
- The gripper won't let you drop or spill anything when used correctly. There is no slippage when plates or bowls are gripped correctly. When lifting hot things with heavy food, please use both hands to ....
Check StockSerene Valley Sink Bottom Grid 29-1/16\ X 13-15/16\
- IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you..
- Grid dimension: 29-1/16" X 13-15/16" for your sink bottom with Corner Radius 2"..
- 304 Premium stainless steel with heavy-duty design (outer wire diameter 1/4" and inner wire diameter 1/8") to ensure durability and rust-free with limited life warranty and protect your kitchen sink from daily wear..
- Please refer to the video shown at the bottom of the product picture display for more detailed info on measuring your sink to fit our grid. This info is VERY important and could save you a lot of time if ordering a wrong grid can be avoided..
Check StockFranke FRCNSTR100 Canister Small White and Red
- Stainless steel construction with rubber feet to elevate grid and prevent slipping.
- Designed to completely cover the base of the sink.
- Compatible with all Franke Prestige Stainless Steel sinks.
Check StockBlanco 231608 Multi-Level Sink Grid Stainless Steel
- Stainless steel with protective bumpers and feet.
- Fits the BLANCO QUATRUS Super Single bowls.
- CONVENIENT DRAIN GRATE: Allows water to pass below standing the dishes, this stainless steel sink grid is ideal for food prep and rinsing plates.
Check Stock