Reviews Stainless Steel Angle Ruler

GemRed Digital Angle Finder Tool, 2 in 1 Angle Gauge, Stainless Steel 7inch/200mm Digital Protractor for Woodworking/Carpenter/Construction/DIY Tools (Battery Included) …

  • ...large LCD display, read clearly. ☆Also easily operate with only 2 bottons.(The red and white buttons make the function distinction clearer and more convenient.).
  • 【Humanized Detail Design】 ☆Locking Function: For read it easily, GemRed digital protractor could be locked at any angle. ☆Specially treated matte stainless steel ruler body: The ruler body does not reflect light, each Angle can be clear reading ☆Bigger and bolder type of the ruler: Sharper reading..
  • 【Durable & Long Battery Life】 This digital protractor has been adopted high quality stainless steel ensures the durability of the product. Large capacity standby with automatic power-off function can work more than 2000 hours, saving power consumption and extending battery life..
  • 【Note & Waranty 】 Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN.*SCRATCHES ON RULERS ARE RESULTED FROM TOUCHING WITH EACH OTHER. IT MAY APPREAR ON BRAND-NEW PRODUCT. We provides high-quality services with a 12-month warranty..
Check Stock

Miter Saw Protractor Angle Finder, 360 Degree Rotation Function, 7.3 inch Construction Protractors for Woodworking and All Building Trades

  • Large LCD Display: This Digital protractor is equipped with a large LCD display for easy reading.
  • Lock and Reverse angle functions: You can hold and keep the reading by pressing the HOLD function button, it also comes with a Reverse Function Button, When you measuring large angle and doing reverse measurement, The display could read up-side-down. Easy to read, laser engraving scale, clear and accurate..
  • Stainless Steel Body: Durable stainless steel body can be used for a long time.
  • use a CR2032 button battery to work for more than 2000 hours (CR2032 Battery included)..
  • Zeroing at Any Angle: Zero-adjust at any angle under the relative measurement angle of a button.
  • the locking screw is used to maintain the measured reading at any time.
  • it will be automatically shut off after 6 minutes of inactivity..
  • Quick and Accurate Reading: The combination of digital stainless steel ruler and angle finder can make accurate measurement.
  • the hinge mechanism on the angle ruler allows a complete 360 degree measurement of internal and reverse angles..
Check Stock

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

  • ...of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can draw any line you want with this ruler.
  • HIGH QUALITY: The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • AFTER-SALES SERVICE: If you have any questions after receiving the goods, please contact us as soon as possible, we will provide you with good after-sales service. If the product is defective, please contact us to return it for you, or you can consult us if you have any questions during use.
Check Stock

WEIKUELE Woodworkers Edge Rule,Multifunction Protractor Angle Finder,0-70°Adjustable Edge Angle Measure Tool, for Student Drawing and Woodworkers Build Furniture (15 in)

  • Reliable quality: The measuring device and the ruler body of the woodworking side ruler are made of stainless steel, which has anti-corrosion and anti-rust functions and can be used for a long time..
  • Accuracy: The ruler tool can be adjusted from 0° to 70°, and there is a steel ball every 5° (plus 22-1/2°, 67-1/2°), which can firmly lock the angle drawing line during measurement.
  • Any angle can be obtained by moving and rotating the ruler..
  • Available in three sizes: This product is available in three sizes of 10", 15" and 20" to ensure your various needs in use..
  • Simple operation: This ruler makes layout a breeze, fast and accurate. Turn the ruler to get your desired angle. Adjust the nut for the best feel..
  • Wide range of uses: Ideal for students, mechanics, carpentry, vehicle maintenance and repair, construction, drafting. Can be used in workshop, home improvement, toolbox, cabinet..
Check Stock

Suncala Digital Angle Finder Protractor with Zeroing and Locking Function, 7-Inch Stainless Steel Angle Finder Ruler

  • * QUICK AND ACCURATE READING - Digital LCD display for easy reading.
  • * MULTI-FUNCTIONAL MEASUREMENT - 2-in-1 device to measure both length and angle, metric and Imperial Scale.
  • * RESETTING & LOCKING - The ruler could be hold at any angles using the lock/open knob to adjust the tightness..
  • * DURABLE AND SIMPLE ON/OFF - Ruler made of stainless steel for durability, Could be well used into various fields besides of Angle ruler, Straight ruler and Square Ruler..
  • Can work more than 2000 hours with one piece of CR2032 coin battery(Included).
Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • ...ches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL：The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index holes and the spring-type, close-tolerance indexing pins engaged with it.
  • The pin snaps into place, so you can make sure that its positioning is accurate.
  • CONVENIENT STORAGE：Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. Woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
Check Stock

General Tools 823 Digital Angle Finder Rule, 10-Inch

  • PREVENT WASTE- This digital 10” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements.
  • LOCK IT AND REVERSE IT- Digital protractor has lock and reverse angle functions. Place the angle rule where you need to measure your next cut, LOCK it in place with knurled locking nut, make a mark and use your miter saw to make your cut. The angle finder will automatically display the reverse angle.
  • MEASURE 360-DEGREES- Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles, accuracy +/-0.3 Degrees. Center check notches are on the ruler ends enables exact ruler placement marking. Display has a hold function to freeze movement for accuracy.
  • PICK YOUR ZERO POINT- Woodworking tool can be zeroed at any point in the swing plus the display can be inverted for easy reading.
  • LARGE LCD DISPLAY- Easy to read LCD display eliminates guessing or eyeballing the angle and length with one convenient protractor tool.
  • Power source: "CR2032" Lithium-ion battery (included).
Check Stock

Angle Protractor ,Stainless Steel Angle Ruler Finder 0-180 Degrees ,10 cm Woodworking Ruler, Angle Measure Tool, Angle Finder Ruler, Craftsman Angle Measure Tool

  • 2 in 1 Angle Finder : It is 2-in-1 manual protractor ruler for measuring lengths and angles. Great gift for dads, men and women who work in woodworking, construction, engineering..
  • Durable Angle Ruler: It is stainless steel protractor,prevent rust and corrosion , do not bend or deform easily ,laser etched measurements offer clear reading ..
  • Lightweight and Portable : You can put the angle measure tool in your pockets,the angle finder ruler is clear and accurate for measuring length(0-10 cm)..
  • Adjustable Protractor Arm : The protractor arm can be easily asjusted from the nut, so it helps you draw radial lines, measuring and marking angles..
  • Wide Applications : This angle ruler is a practical measuring tool for school, office, architect, suitable for for engineering, school, office, architect, and drawing who needs to measure data..
Check Stock

WORKPRO Rafter Square and Combination Square Tool Set 7 in Aluminum Alloy Die-Casting Carpenter Square and 12 Inch Zinc-Alloy Die-Casting Square Ruler Combo Rafter Square Layout Tool

  • Durable Material - The rafter square is die-cast from heavy-gauge aluminum alloy which enables it to last long and still give an accurate measurement. The combination ruler itself is die-cast from zinc alloy and carries a steel ruler made of stainless steel with a matte finish..
  • Clearly Identifiable Scale - The rafter square finishing features low glare and protective powder coated. It has permanent deep markings and white graduations for max readability in any lighting. The stainless steel ruler of the combination square has a deep etching scale for superior legibility and long-lasting usage..
  • Multiple Graduation - 7-inch rafter square has many kinds of graduation which blends the features of framing square, try square, miter square, and protractor square. The combination square has a 12-inch stainless steel ruler which has 3 types of minimum scale values: 1/16”, 1/32”, and 1mm..
  • User-Friendly - Lipped fence allows you to easily brace the rafter square flush with the wood, creating a straight or angled line that is proportionate to the wood's edge. The spring screw of the combination square makes it easier to detach the stainless steel ruler and the smooth ruler is easier to slide for your measurement..
  • Wide Versatility - Easy-to-read level vial and....
Check Stock

TWOZOZO Woodworking Edge Ruler, Precision Woodworking Tools Ruler with Adjustable Protractor Angle Finder, Stainless Steel Carpenter Mark Rule（20 Inch）

  • ...R AND LEGIBLE SCALES: T square ruler is laser precision engraved. It has permanent dark markings and white scales for maximum readability in any light.
  • DURABLE MATERIALS: The dial of the woodworking edge ruler is made of plastic ABS, and the goniometer and body are made of stainless steel, which is resistant to moisture, rust and corrosion. The measuring tape is perfect for carpenters, designers, architects, mechanics, engineers, etc.
  • EASY TO HANDLE: You can put the cross side of the disc close to the edge of the board and turn the ruler to get the angle you want, draw a straight or diagonal line. The pencil tip is placed in the notch of the serrated groove and moved along the board to facilitate your measurement.
  • WOODWORKING RULER PLACEMENT: The carpenter's ruler comes with a wall-mounted storage rack for stable storage.
Check Stock