Reviews Stainless Steel Angle Iron Inch

ChgImposs 5Pcs 16-30mm 5/8-Inch to 1-3/16 Inch HSS Hole Saw Cutter, Drill Bits Set Heavy Duty Tool Kit for Stainless Steel, Aluminum Alloy, Plastic and Wood

  • Outside Diameter Size: 16mm/0.62in(5/8-Inch), 18.5mm/0.73in(3/4-Inch), 20mm/0.78in(4/5-Inch), 25mm/0.98in(1 Inch), 30mm/1.18in(1-3/16 Inch). There are 5 size of hole saw kit to meet your professional needs..
  • High Quality Material: Made from strong HHS high-speed-steel for durability, high hardness, fast cutting, impact resistance, wear high temperature.
  • Sharp gears and anti-cutting with lower consumption make the product a long service life.
  • Can be used for thick steel plates, cast iron, stainless steel, non-standard angle iron and other metal open hole. Perfect for installing locks, knobs on doors and cabinets, or drilling large diameter holes through desks, etc.
  • Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. Provide fast and precise cuts into stainless steel, sheet metal, cast iron, mild steel, aluminum, plastic,copper and brass.
Check Stock

Makita 5 Pack - 4.5\ Cut Off Wheels For 4.5\ Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2\ x .045\ x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION....
Check Stock

Cutting Wheel 4-1/2 Inch 100 PCS Cut Off Wheel 4.5"x.047"x7/8" Cutting Disc Ultra Thin Metal & Stainless Steel,Cutting Wheel Fits Angle Grinder Saw Grinder Metal Cut Tools

  • FITS ANY ANGLE GRINDER ：Grinder blades is 4.5"x.047"x7/8" total in 100 PCS.Fit for 4-1/2”Angle Grinders and compatible with All 4-1/2”Angle Grinders..
  • MULTIPLE UESES : Grinding Wheel are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive cutting action.Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel.fast burr free cutting.
  • Package List:100Pcs 4 1/2 Inch Cut Off Wheel.
Check Stock

SKILFUL Cut Off Wheels 50 Packs, 4 1/2 inch Ultra Thin Cutting Wheels Anti-vibration Angle Grinder Cutting Discs for Metal and Stainless Steel Cutting

  • Double Cutting Efficiency---The SKILFUL 115mm angle grinder disc adopts a unique ratio of alumina and silica, acting on a solid stainless steel plate with a thickness of 20mm, which can cut 18 pieces, while other cutting wheels can only cut 10-15 During the cutting process, burrs and clogging will not occur even when it is aluminum, thereby finding a balance between sharpness and wear resistance, thereby reducing rework rate and simplifying work.
  • Double-Layer Glass Fiber Has a Longer Service Life---We use BASF's adhesive (resin) and double-layer glass fiber mesh to make it perfectly integrated, which produces self-sharpening and adds a layer of fiber cloth to the bottom of the grinding machine cutting wheel. Reduce the resin moisture and increase the density of the cutting disc, thereby prolonging the service life and facilitating storage.
  • FITS ANY ANGLE GRINDER---Stainless steel cutting discs is 4 1/2 x0.04x7/8 inch total in 10 PCS with ultra thin metal & stainless steel fast burr free cutting.Compatible with die grinder, electric cut off tools,accessories for DEWALT,Makita ,Bosch,Ryobi and so on.
  • MULTIPLE UESES---The angle grinder disc are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive c....
Check Stock

CGOLDENWALL 1200W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger for Steel Plate Angle Steel Plate Iron Plate Aluminum Plate CE&ROHS Certificate

  • [FAST ELECTRIC PUNCHING] 1200W High Power, Punching speed is as fast as 2-3 seconds.
  • [ACCURATE POSITIONING,NO OFFSET] It is a electric hydraulic puncher applied for drilling of copper, aluminum, steel, iron plate, 4 to 6 # angle, etc. Wide Wide punching range: Iron/steel plate≤0.23 Inch, Copper/ aluminum plate≤0.31 Inch, Angle iron≤ 0.23 Inch.
  • [EASY TO OPERATE] One-button start,regular punching surface, no burrs ,and great saving labor and improving punch speed.Two kinds of working mode, Install the base and work on the platform,Or install the auxiliary handle and hold it for worktorized, labor saving effectiveness.
  • [DURABLE AND RELIABLE QUALITY] Steal punching head,High strength and durable switch key,Detachable strong base,Thicker steel body, with better stability and longer service life.
  • [APPLICATION] Used in punching on steel plate, angle steel plate, iron plate, aluminum plate, U-steel etc..
Check Stock

Augtouf 6 Pack Cut Off Wheel, 4 1/2'' Angle Grinder Thin Cutting Wheels for Metal & Stainless Steel 4.5"x1/16"x7/8"

  • PRODUCT SPECIFICATIONS - 4 1/2 Inch Cut Off Wheel, with 7/8" arbor, 1/16" Thickness. Up to 13,300 maximum RPM setting (>common 13,000 RPM). Compatible with 4-1/2 inch die grinders and angle grinders with 7/8-inch arbor.
  • PREMIUM CORUNDUM RAW MATERIALS - Higher cutting efficiency and abrasion resistance than aluminum oxide grains, reinforced by double fiberglass mesh, these cutting discs perform much more aggressive cutting in metal and stainless with safety and longer service life.
  • WIDE APPLICATIONS - Designed for cutting fiberglass, steel, iron, stainless steel, and other ferrous metals for cutting action. Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural galvanized steel, sheet metal, structural tubing, black steel.
  • SAFETY MANUAL - Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, hearing protection, and respiratory protection may be required, depend on the work.
  • AFTER SALE SERVICE - 180 days warranty are available for all of our customers, need any further help please feel free to contact us..
Check Stock

WORKPRO 20-Pack Cut-Off Wheels 4-1/2 x 7/8-inch Metal&Stainless Steel Cutting Wheel Thin Metal Cutting Disc for Angle Grinder

  • ✅ Premium and Value: This 20-pack 4-1/2 x 7/8-inch metal/stainless steel cut-off wheel set is specially formulated for fast cutting in metals and....
  • ✅ Safe but Durable Material: Bonded with corundum and white alundum grain and reinforced by double fiberglass mesh, these cutting discs perform much....
  • ✅ Precise and Efficient Cutting: 3/64-inch ultra thin design for fast burr free cutting with minimal material loss, make cutting project more....
  • ✅ Great Performance: Perfectly compatible with all 4-1/2 inch angle grinders with 7/8-inch arbor, operating up to 13,000 RPM and 80M/S..
  • ✅ Versatile Applications: Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron,....
Check Stock

DEWALT 20V MAX* XR Angle Grinder Kit 4.5-Inch Paddle Switch Small Angle Grinder and 1-1/2-Inch Die Grinder 2-Tool DCK203P1

  • ✅ Premium and Value: This 20-pack 4-1/2 x 7/8-inch metal/stainless steel cut-off wheel set is specially formulated for fast cutting in metals and....
  • ✅ Safe but Durable Material: Bonded with corundum and white alundum grain and reinforced by double fiberglass mesh, these cutting discs perform much....
  • ✅ Precise and Efficient Cutting: 3/64-inch ultra thin design for fast burr free cutting with minimal material loss, make cutting project more....
  • ✅ Great Performance: Perfectly compatible with all 4-1/2 inch angle grinders with 7/8-inch arbor, operating up to 13,000 RPM and 80M/S..
  • ✅ Versatile Applications: Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron,....
Check Stock

COMOWARE 4 1/2\ Cut Off Wheel 25 Pack, Cut Off Wheels 4 1/2 x 7/8 Inch Ultra Thin, Metal and Stainless Steel Cutting Wheel for Angle Grinder, General Purpose Metal Cutting Disc for Angle Grinder

  • 【SHARP & CLEAN CUTTING】 This 25-pack 4-1/2 x 7/8-inch cut off wheel set is specially formulated for fast cutting in metals and stainless steel. The extremely thin .045-inch wheel design helps for clean, straight cuts with minimal burr..
  • 【PREMIUIM MATERIAL】 These 4-1/2" cut off wheels are specifically manufactured from corundum, aluminum oxide grain that provides high hardness, durability and abrasion resistance. The internal double fiberglass reinforcement provides ultimate safety and longer service life in these ultra-thin cutting wheels..
  • 【GENERAL PURPOSE METAL CUTTING】 Proprietary aluminum oxide grain combination helps these angle grinder cutting wheels deliver aggressive cutting action on carbon steel, sheet metal, rebar steel, stainless steel and other ferrous metals (not for masonry or concrete)..
  • 【SAFETY & STABILITY】 Reinforced by 2 full sheets of fiberglass and zinc-iron alloy rings for extra durability, this very hard cutting disc delivers stable performance with less wheel shatter..
  • 【GREAT PERFORMANCE】 These 4.5" cut off wheels for metal are compatible with all 4-1/2 inch angle grinders with 7/8 inch arbor. Up to 13,300 RPM (003ecommon 13,000 RPM) rotating speed for maximum productivity..
Check Stock

50 Pack Cut-Off Wheels 4 1/2 inch Thin Metal & Stainless Steel Cutting Wheel Professional Fast Cutting Disc for Angle Grinder

  • 【50 PACK】This is for a pack of 50 pieces of our cutting wheels.Outer diameter:4.5inch inside diameter:7/8 inch, operating up to 13,300 RPM. optimized for 4.5"angle grinders..
  • 【MATERIAL】Proprietary aluminum oxide grain for long life and fast cutting.double fiberglass mesh reinforced for further safety and durability..
  • 【PERFORMANCE】Thin 0.045" cutting wheel design for fast burr free cutting. Perfectly compatible with all 4 1/2 inch angle grinders with 7/8-inch arbor, operating up to 13,300 RPM and 80M/S..
  • 【APPLICATION】Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron, copper and other ferrous metals..
  • 【SAFETY TIPS】Please use all necessary protective gear when you use these cutting discs..
Check Stock