Reviews Stable Current Output

High Voltage DC-DC Boost Converter 8V-32V to 45V-390V Adjustable ZVS Capacitor Charging Power Supply Module

  • Input voltage: two input voltage range selectable, (jumper selectable through the back of the PCB, default setting 10-32V input): 1) 8V-16V input 2) 10V-32V input.
  • Output voltage: 45-390V continuously adjustable (the default output 50V. This module has regulator function, after adjusted output voltage is stable and unchanging, not with changes in input voltage changes).
  • Output Current: 0.2A MAX (affected by input voltage and dropout voltage,the higher the output voltage, the smaller the output current).
Check Stock

4 Pieces Adjustable LM2596S DC-DC Buck Converter Reduced Voltage Regulator Power Module 36V 24V 12V to 5V 2A Voltage Stabilizer with Digital Voltmeter Display

  • Product parameters: input voltage is 4.0V - 40V, output voltage is 1.25V - 37V, output current is 2A (normal and stable) and 3A max, conversion....
  • Simple to operate: the voltmeter can be turned off, and the switch can be turned off by pressing and holding the switch for more than 1 second and....
  • Easy to use: with terminal block, no soldering iron is also convenient to use, and retain the wire bond point (the input voltage must be higher than....
  • Output current: the maximum output current can be as high as 3A, the recommended working current is about 2A, more than 2A plus heat sink.
  • Nice design: with 150KHz internal oscillation frequency, features low power consumption and high efficiency.
Check Stock

NOYITO ACS712 Current Sensor Module Detector ACS712ELC 5A 20A 30A Amps Amperage Range (Pack of 2) (20A)

  • USES: SZT20-CH-420E AC current sensor can measure the AC current in the grid or circuit in real time and convert it to 0-5V / 0-10V or 4-20mA DC current output signal..
  • VERSATILE: It can be combined with various AD to form a variety of digital centralized acquisition systems. Or output to the PLC to form an automatic control system, or match the traditional analog and digital indicating instruments, display the measured values..
  • EXCELLENT ATTRIBUTES: mutual current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
  • HIGH PRECISION: The product has a hysteresis of less than 1% and can be used in strong magnetic field conditions..
  • ADVANTAGES: It has the characteristics of strong overlapping ability, high precision, high isolation, high safety, low power consumption and strong anti-interference ability..
Check Stock

Adjustable DC Power Supply (0-30 V 0-5 A) with Output Enable/Disable Button HANMATEK HM305 Mini Variable Switching Digital Bench Power Supply

  • 【Auto Power Calculation】 - Intelligently calculates output voltage and current into power and displays the value on its large screen..
  • decimal point automatic carry & LED 4 digits display of voltage function displays.current and powe.
  • The keyboard can be locked to prevent misoperation..
  • 【Output switch control】 - Sometimes we need to switch between different voltage or current outputs, but we often forget to unplug the previous instrument and cause the instrument to burn out.,which often occurs in the maintenance.Output key is designed to solve this problem.By pressing the Output key, the required voltage and current can be adjusted without the actual output power,Which makes this DC power supply more secure and more energy efficient..
  • 【Safe and Reliable to Use】 - Safety is our priority. The built-in fan low arc noise & low ripple,The power supply is durable and compact. Productive work since the power supply comes multiple protection of Over-voltage, over-current, over-power, over-temperature, short-circuit powerful protection function..
  • 【Wide Application】 - Applied in production line test, electrical maintenance, aging products, battery charging, laboratories scientific research and teaching and all other need DC regulated power supply.....
Check Stock

Current Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A

  • Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
  • The measured current of this current transmitter is AC 0-10A/20A/50A.
  • The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
  • With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
  • through‑core structure design, isolation withstand voltage up to 2000VAC.
  • hysteresis less than 1%, can be used under strong magnetic field conditions..
  • The shell is made of self-extinguishing material ABS.
  • it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..
Check Stock

Diymore 2pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module 20v to 12v Step Down

  • This step-down voltage module with a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current..
  • It is designed with 75V/80A large current dual MOS tube. Input and output use high frequency low resistance electrolytic capacitor, low ripple, stable output..
  • The efficiency can be up to 96%, measured at 20A, converting 24V to 12V. Wiring is convenient with these large current 30A screw terminals..
  • The buck module has 2 heat sink that could enhance heat dissipation, extending service life..
  • When there is a big difference between input and output voltage, please decrease power and current..
Check Stock

SQL 100 amp 1600V 3 phase AC to DC High Power Rectifier Silicon Full Wave Diode Bridge Rectifier Module 5 Terminal with Heatsink

  • High quality bridge rectifiers used for conversion of an alternating current input into a direct current output.
  • Well welded structure with good temperature and power cycle ability ensures a more stable performance.
  • Designed for 3 phase rectification, output DC current is 100A.
  • It has a large over-current capacity, good heat dissipation.
  • This high power bridge rectifier can be widely used for power supply.
Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • ...ing and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated volta....
Check Stock

Hantek DC Power Supply 32V 6A Adjustable Programmable Multiple Storage Functions Low Noise Precision Digital Lab Bench Power Source Stabilized Voltage Regulator with Short Circuit Alarm

  • 【List Programmable】 In the list mode, the required voltage and current can be easily adjusted through the coding knob setting the 10 sets of voltages,currents,the parameters can be set according to your demands, fast storage, convenient to call at any time.
  • 【Higher Sensitivity & Precision】The voltage output is 0-32V, and the current output is 0-6A, four-digit display voltage and current, resolution up to 10mV/1mA, can make the voltage and current in the test more accurate.Good power stability and ripple coefficient, it can precisely sense the location of voltage and current.
  • 【10 groups of storage/memory and recall function】10 groups of commonly used current and voltage data can be stored at will, and can be recalled at any time. Adjust to the voltage and current data to be stored, and then long press the corresponding storage key to store the data.
  • 【Multi-protection functions】The Power Supply comes with over voltage, over current, overload, overheating, short circuit protection functions.
  • The built-in low noise temperature control fan,prolonging the life of product effectively.
  • On/Off output control, one-button panel lock function to prevent misoperation.
  • 【Multifunction】Standard USB quick charge function, support a variety of quic....
Check Stock

5 Pack JacobsParts DC Boost Module 3V 3.3V 3.7V 4.2V Input 5V 2A USB Output 10W DIY Power Bank

  • Turn any 2.5-5.5V DC power source into a USB charging port • Add a USB charging port to all kinds of electronic devices.
  • Get stable 5V output from 3.7V lithium cells over their entire operating voltage range.
  • 5V 2A Peak Output • 1.5A Sustained Output • 1MHz Switching Frequency • Up to 92% conversion efficiency.
  • LED Power Indicator • Industrial grade (-40℃ to +85℃) • Ceramic Capacitors.
  • Over current protection • short circuit protection • low voltage and low current output protection.
Check Stock