Reviews Ssd Drive For Mac

Cable Matters Premium Aluminum 10Gbps Gen 2 USB C Hard Drive Enclosure for 2.5\ SSD/HDD with USB-C and USB-A Cables - Thunderbolt 4 / USB4 / Thunderbolt 3 Port Compatible with MacBook Pro, MacBook Air

  • USB C 2.5 External SSD Enclosure supports a 2.5" SATA SSD or HDD drive.
  • portable external hard drive in a sturdy aluminum housing protects the SSD drive and assists with heat dissipation.
  • Portable USB 3.1 SSD enclosure offers convenient and fast data back-up for temporary or long-term use.
  • Diagnose internal SATA SSD drives for replacement or repair with this SATA HDD adapter.
  • Tool free SATA hard drive enclosure offers a data transfer rate up to 10Gbps with a compatible computer.
  • 10Gbps data transfer rate is 2x faster than USB 3.0.
  • Thunderbolt 3 computer compatible with the included USB C cable.
  • Supports the maximum SATA III 6Gbps data transfer rate.
  • SSD hard drive USB C to SATA storage solution is compatible with Windows or Mac computers as a Thunderbolt 3 hard drive enclosure.
  • USB C SSD enclosure provides a cost-effective solution for adding additional memory without opening up your laptop.
  • UASP, TRIM and S.M.A.R.T support with compatible computers, drives and OS for increased data transfer speeds, improved CPU utilization and failure detection.
  • 10 Gbps USB C hard drive ENCLOSURE is compatible with SATA SSD or HDD drives up to 9.5mm, including 7mm.
  • SATA to Thunderbolt 3 hard drive enclosure is compatible with SATA drives such as the Samsung 860 EVO, Kin....
Check Stock

M.2 NVME SSD Convert Adapter, 12+16pin M.2 NGFF M-Key SSD Convert Card for MacBook Air Pro Retina Mid 2013 2014 2015 2016 2017, NVME AHCI SSD Upgraded Kit for A1465 A1466 A1398 A1502

  • [NVME SSD Adapter] - This NVMe SSD convert adapter is DIY kit for assembling a upgraded SSD replacement for MacBook with large capacity NVMe SSD.
  • [High Performance] - Used to upgrade your storage capacity, perfect for tech enthusiasts, high-end gamers, 4K & 3D content designers.
  • [Applicable SSD Hard Drive] - ONLY support PCIe NVMe based based M Key and B+M Key SSD (NVMe & AHCI), NOT support any SATA based SSD.
  • [Support System] - It is compatible with MacBook Air 11 “A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13 “ A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
  • [Please Note] - Require Mac OS 10.13 High Sierra or Later.
  • DO NOT compatible with earlier than Mac OS 10.13 versions. Please use your original SSD to upgrades your Mac OS before installation.
Check Stock

JESOT M.2 to USB Adapter, B Key M.2 SSD to USB 3.0 Reader Card, NGFF SATA Converter Support SATA Based SDD 2230 2242 2260 2280 No Cable Needed

  • [Efficient] - This M.2 USB adapter can used as a portable flash drive or external hard drive for cloning or retrieving data, not cable needed.
  • [High Performance] - The M.2 drive adapter comes with a 5Gbps USB3.0 1153E chip, can retrieve and backup data in high-speed.
  • [Applicable SSD Hard Drive] - Input Interface: ONLY support for SATA Based B Key and B+M Key SSD, DO NOT support any PCIe NVMe based SSD. Output Interface: support for USB 3.0 and downward compatible with USB 2.0.
  • [Support System] - The M.2 SSD SATA adapter compatible with Window 2000/ 2003/ XP/ Vista /7 /8, Linux OS, Chrome OS and Mac OS. Supports for 2230 / 2242 / 2260 / 2280 SATA port NGFF SSD.
  • [Hot Swap] - The USB to 2280 M.2 SSD drive adapter without enclosure cover, can help fast heat dissipation. Plug and play, can realize full potential of high performance.
Check Stock

JESOT NGFF M.2 NVMe SSD Convert Adapter Card for Upgrade MacBook Air 2013 2014 2015 2016 2017 and Mac Pro Retina 2013 2014 2015, NVMe AHCI SSD Upgraded Kit for A1465 A1466 A1398 A1502

  • ...ng a upgraded SSD replacement for MacBook with large capacity NVMe SSD.
  • [High Performance] - Used to upgrade your storage capacity, perfect for tech enthusiasts, high-end gamers, 4K & 3D content designers.
  • [Applicable SSD Hard Drive] - ONLY support PCIe NVMe based based M Key and B+M Key SSD (NVMe & AHCI), such as Adata NVMe SSD: SX6000, SX7000, SX8200, SX8200 Pro etc, Corsair : MP500, MP510, Crucial: P1, HP: ex920, ex950. Intel NVMe SSD: 600p, 660p, 760p, Toshiba XG3-XG4-XG5-XG5p-XG6 line, Samsung: 960 Evo, 960 Pro, 970 Evo, 970 Pro, WD: v1, v2 and v3, MyDigital: SBX - BPX. NOT support any SATA based SSD.
  • [Support System] - It is compatible with MacBook Air 11 “A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13 “ A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
  • [Please Note] - Require Mac OS 10.13 High Sierra or Later.
  • DO NOT compatible with earlier than Mac OS 10.13 versions.
  • DO NOT support Samsung 970 Evo Plus, PM981, 950 Pro. Please use your original SSD to upgrades your Mac OS before installation.
Check Stock

ULXUUUN SATA to USB Cable, USB 3.0 to SATA III Hard Drive Adapter Compatible for 2.5-Inch HDD & SSD, Support UASP

  • 【QUICKLY ACCESS TO 2.5" SSD/HDD】: Supports drive with the standard SATA connector, Connect a 2.5" SATA hard drive to your computer for add storage, create disk images, transferring files on HDD/SSD and Add drive space to upgrade your laptop, and have a chance to keep old HDD as an external memory. ( Not support 3.5'' SSD & HDD).
  • 【FAST TRANSFER SPEEDS UP TO 6GBPS WITH UASP】: The USB to SATA adapter supports USB 3.0 data transfer speeds of 6Gbps, 70% faster than conventional USB 3.0 when connected to a computer that also supports UASP, Reverse compatible with USB 2.0 & USB 1.1.
  • 【EASY TO USE】: SATA to USB 3.0 adapter Hot-swappable, plug & play, no drivers needed. for a 2.5" drive no need for an additional power supply, An LED light indicates Power and Activity status. The cable length is only about 8 inches, which is good enough for cloning a laptop hard disk drive to an SSD.
  • 【WIDE COMPATIBLITY】Compatible with USB 3.0 computer systems such as Dell Optiplex & Apple Mac & MacBook and 2.5in SATA hard drives & solid-state drives such as Samsung 840 EVO series & Crucial MX 100 series. System requirements:Windows: XP/Vista/7/8/8.1/10, MAC: OS X, Linux.
  • 【WARRANTY】: 45 Days Money Back Guarantee & 12-Month Worry-free Warranty. Friendly and easy-t....
Check Stock

Inateck Mounting Bracket for 2 x SSD/HDD, Compatible with Regular PC and Mac Pro 2019, with SATA Cable and Installation Tool

  • Work with Regular Computer Case: Widely compatible with different desktop computer cases. With the bracket you can mount a 2.5” hard drive to the 3.5” hard drive slot in a computer case..
  • Work with Mac Pro 2019: Can be mounted to a Mac Pro 2019. With this mounting kit, you can install 2 x 2.5” SSDs/HDDs in Mac Pro 2019..
  • Dual Hard Drive Installation: Supports installing 2 x 2.5” SSD/HDD. A single hard drive is also applicable..
  • Metal Strip Support: Put your hard drive on the metal strip support, and turn the screws into the holes on the two sides of the hard drive. No need for holding the hard drive manually..
  • Easy to Install: For Mac Pro 2019, lead the bracket into the computer case via the slideways and fix it from the outside with screws. For a regular computer case, you can install the bracket with screws..
Check Stock

Cloudeck NVMe SSD 512GB PCIe Gen3x4 Internal Solid State Drive with 3D NAND for MacBook Air (Mid 2013-2017), MacBook Pro(Retina, Late 2013-Mid 2015), Mac Pro(2013) & Mini (2014), iMac(2013-2017)

  • ⏩【Ultra Read &Write Speed】 Powered by NVMe interface (PCIe Gen 3.0 x4), the SSD’s sequential read and write performance levels of up to 1,800MB/s and 1,400MB/s..
  • ⏩【3D TLC NAND Technology】Triple-level cell (TLC) NAND stores 3 bits per cell. By adding more bits per cell, this reduces the cost and increases the capacity, keeping the Mac you love running faster, longer, and cooler than before..
  • ⏩【For Intensive Application】1 Year Warranty, Designed for macOS 10.13 and beyond. Ideal for 3D animation, rendering, photo and video editing, gaming, and other heavy workloads applications..
  • ⏩【Wide Compatibility】The 3D NAND NVMe PCIe Internal SSD fits for Mac Mini (2014), Mac Pro (2013), iMac (2013-2017), MacBook Air (2013-2017), MacBook Pro (2013-2015). Please match your device’s EMC to see if this drive is the right fit for you..
  • ⏩【Kindly Note】 Must update original SSD to mac OS 10.13 or later version before moving out. New SSD will not be recognized after replacement if original SSD installed 10.12 or earlier Mac OS..
Check Stock

SFX - Echo Sound Like Setting Up Survelance In A Haunted Place

  • [Usage] Perfect for hard drive or SSD upgrades. Also good for full system Backup, data migration to SSD, and making a duplicate HDD as standby. Compatible with Windows 11, 10, 8.1, 8, 7, Vista and XP..
  • [Versatile] Compatible with any USB-to-SATA adapters. Supports cloning to NVMe, 2.5" SSD and HDD, also to 3.5" HDD. NTI's trademarked "Dynamic Resize" technology enables cloning to a target drive of smaller, equal, or bigger size..
  • [Powerful] Able to clone Windows, Linux, Mac, or Windows/Linux/Mac multi-OS partitions* (Please see NOTE below). Your PC installed with NTI Echo 5 becomes your Cloning Station, just connect Source disk and Target disk to it and start cloning!.
  • Improved Compatibility with latest Windows 11 and devices. Check NTI website for FAQs, especially if you want to clone on a gaming PC/ laptop (e.g. Alienware, Predator). Contact NTI technical support if you have questions, we'll be happy to help!.
  • [IMPORTANT] Please check NTI website for technical support and FAQ, most reported issues in user reviews *can be* fixed. [NOTE*] Software activation requires Internet access. Installed and run from Windows (11, 10, 8.1, 8, 7, Vista or XP), able to clone multi-OS partitions with Windows, Linux and Mac OSX on the....
Check Stock

UGREEN USB C Hard Drive Enclosure for 2.5\ SATA SSD HDD Aluminum USB C to SATA Adapter USB 3.1 Gen 2 Support UASP SATA III Compatible with MacBook Pro Air WD Seagate Toshiba Samsung Hitachi

  • 【USB C Hard Drive Enclosure】UGREEN hard drive enclosure can easily connect a 2.5" SATA SSD or HDD with your computer to expand storage, upgrade the system, back up files, retrieve and recover data, and transfer data. This external hard drive enclosure protects the external hard drive from outside scratches and makes the hard drive portable for data storage..
  • 【6Gbps High-Speed SSD Enclosure】UGREEN hard drive reader supports 6Gbps max transfer speed and UASP accelerated transmission protocol, 70% Faster than traditional USB 3.0. The USB-C port is standard USB 3.1 Gen 2 which supports 10Gbps and (7+15)Pin SATA III supports max 6Gbps. 【USB-C to USB-C Cable included】.
  • 【Aluminum 2.5" Hard Drive Enclosure】Made of premium aluminum alloy, durable and excellent heat dissipation, no cooling fan is needed for your high-speed working, portable and easy to carry with. The LED indicator lets you know the working status easily. The Auto Sleep Mode helps to extend the lifespan of your hard drives..
  • 【Easy Installation HDD Enclosure】Plug and play with tool-free installation, no driver is needed for this external hard drive case. Supports Windows/Mac OS/Linux systems, game consoles like Sony PS4/PS3/Xbox One, Smart TV, Router, etc. 【For the devices on....
Check Stock

Cat Footwear Women's Echo WP ST Industrial & Construction Shoe, Black, 5 Wide

  • [Usage] Perfect for hard drive or SSD upgrades. Also good for full system Backup, data migration to SSD, and making a duplicate HDD as standby. Compatible with Windows 11, 10, 8.1, 8, 7, Vista and XP..
  • [Versatile] Compatible with any USB-to-SATA adapters. Supports cloning to NVMe, 2.5" SSD and HDD, also to 3.5" HDD. NTI's trademarked "Dynamic Resize" technology enables cloning to a target drive of smaller, equal, or bigger size..
  • [Powerful] Able to clone Windows, Linux, Mac, or Windows/Linux/Mac multi-OS partitions* (Please see NOTE below). Your PC installed with NTI Echo 5 becomes your Cloning Station, just connect Source disk and Target disk to it and start cloning!.
  • Improved Compatibility with latest Windows 11 and devices. Check NTI website for FAQs, especially if you want to clone on a gaming PC/ laptop (e.g. Alienware, Predator). Contact NTI technical support if you have questions, we'll be happy to help!.
  • [IMPORTANT] Please check NTI website for technical support and FAQ, most reported issues in user reviews *can be* fixed. [NOTE*] Software activation requires Internet access. Installed and run from Windows (11, 10, 8.1, 8, 7, Vista or XP), able to clone multi-OS partitions with Windows, Linux and Mac OSX on the....
Check Stock