Reviews Square Weld Nuts

90Pcs 304 Stainless Steel Serrated Metric Wing Nuts Butterfly Nuts Hex Dome Cap Assortment Kit 6 Sizes - M3 M4 M5 M6 M8 M10

  • √ Product Name: Metric 304 Stainless Steel Wing Nuts Assorment Kit. The item come with a sturdy plastic organizer box for convenient to store and carry..
  • √ Material: 304 Stainless Steel, corrosion resistant galvanized finish to ensure life-time use, these quality assortment washers for home, automotive, and shop use..
  • √ Quantity: It contains 90Pcs / 6 Sizes of the most commonly used 304 Stainless Steel Square Nuts. Different types of square nuts,designed to stand off the material to allow easy weld penetration,widely used to industrial machine..
  • √ Widely Application: Great replacement for industrial and construction fasteners,also can be a important accessories in your daily life..
Check Stock

TentandTable 36-Inch Square Solid Birch Wood Folding Table | 30-Inch Height | Heavy Duty | Aluminum Edge | for Weddings, Parties, and Events | 4 Pack

  • 3' Square Top (36") - Pack of 2 - 3/4" thick clear faced plywood made from birch wood, sanded smooth without voids and patches, sealed on both sides with a protective polyurethane finish. Legs secured to top with flush flat head carriage bolts, lock washers, and nuts..
  • Aluminum edging is high-pressure crimped to the top - no adhesives used. Legs secured to top with flush flat head carriage bolts, lock washers, and nuts..
  • Legs made from 1" diameter, 16-gauge, cold-rolled, silver powder-coated steel tubing. Continuous weld joints. Black plastic glides pressed into ends of legs..
  • Hinged diagonal brace allows legs to fold. Full-length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking..
  • Perfect for weddings, banquets, picnics, restaurants, events, and more!.
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

uxcell M6 Carbon Steel Slab Base T-Shaped 2 Projection Weld Nuts Pack of 25

  • Made of carbon steel in dark grey, sturdy and durable..
  • Size: 23 x 14 x 8mm / 0.91" x 0.55" x 0.31"(L*W*H).
  • Weld nuts,designed to stand off the material to allow easy weld penetration,widely used to industrial machine..
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

The Hillman Group 160300 1 1 1 1/4-20 Square Nut 100-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Square nuts are used along with flat washers in order to avoid damage from their sharp edges and help to increase the strength of the fastener.
  • Zinc-plated for moderate corrosion resistance.
Check Stock

The Hillman Group 160293 1 1 1 6-32 Square Nut, 100-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Square nuts are used along with flat washers in order to avoid damage from their sharp edges and help to increase the strength of the fastener.
  • Zinc-plated for moderate corrosion resistance.
  • Product Dimension: 2.31" x 2.68" x 1.56".
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock