Reviews Springfield Xdm Osp

Ade RD3-009-OSP Red Dot Reflex Sight for Springfield XDM XD-M OSP Pistol Handgun

  • Fits directly on Springfield XDM XD-M OSP system with the #1 mount that comes with OSP without needing to remove the rear sight. This optics does NOT....
  • Dimensions: L 2.0" x W 1.0" x H 1.1". Weight:0.9oz. Included: Allen wrench,Screwdriver, Adjusting disc, Protective cap ,3V Lithium battery (CR 2032.
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

Ade RD3-012-Delta Red Dot Reflex Sight for Springfield XDM XD-M OSP System Pistol Handgun

  • Does NOT fit the new HELLCAT OSP. Fits directly on Springfield XDM XD-M OSP system with the #1 mount that comes with OSP without needing to remove the....
  • Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was....
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to....
  • 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate..
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation....
Check Stock

Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD XDE XD MOD.2 XD M XDM XDS Pistol

  • New design in 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD....
  • It is design to for Springfield Non-OSP(Non Optics Ready) XD/XDS/XDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It....
  • Fit Ade RD3-006A(Huracan), RD3-006B(Cobra), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex....
  • There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two....
  • Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to....
Check Stock

We The People Holsters - Gray - Right Hand - IWB Holster Compatible with Springfield XDm 3.8 Compact 9MM/.40SW/.45

  • Specifically designed and molded for the Springfield XDm 3.8" Compact 9MM/.40SW/.45, this concealed carry holster is made using only top quality....
  • In order to be effective for self defense you need to be comfortable with your holster. This compatible with Springfield XDm 3.8" Compact....
  • With its thick wall Kydex construction and comfortable hardware, we have crafted a holster compatible with Springfield XDm 3.8" Compact 9MM/.40SW/.45....
  • Designed to be worn inside the waistband with a belt and an un-tucked shirt to properly conceal the weapon, this compatible with Springfield XDm 3.8"....
  • This compatible with Springfield XDm 3.8" Compact 9MM/.40SW/.45 Kydex holster is a durable, form-fitting piece, offering effective concealment and....
Check Stock

We The People Holsters - 2nd Amendment - Left Hand - IWB Holster Compatible with Springfield XDm 3.8 Compact 9MM/.40SW/.45

  • Specifically designed and molded for the Springfield XDm 3.8" Compact 9MM/.40SW/.45, this concealed carry holster is made using only top quality....
  • In order to be effective for self defense you need to be comfortable with your holster. This compatible with Springfield XDm 3.8" Compact....
  • With its thick wall Kydex construction and comfortable hardware, we have crafted a holster compatible with Springfield XDm 3.8" Compact 9MM/.40SW/.45....
  • Designed to be worn inside the waistband with a belt and an un-tucked shirt to properly conceal the weapon, this compatible with Springfield XDm 3.8"....
  • This compatible with Springfield XDm 3.8" Compact 9MM/.40SW/.45 Kydex holster is a durable, form-fitting piece, offering effective concealment and....
Check Stock

Ade Advanced Optics Pistol Red Dot Sight Mount Base Plate/Adapter for Springfield XDE XD XDM XD MOD.2 XD M Hellcat Non-OSP Handgun

  • Released in May 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD....
  • It is design to for Springfield Non-OSP(Non Optics Ready) XD/XDS/XDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It....
  • Fit Ade RD3-006A(Huracan), RD3-006B(Cobra), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex....
  • There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two....
  • Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to....
Check Stock

Springfield XDM 4.5" OWB Holster - USA Made - Fits Springfield Armory XDM 4.5in - Signature OWB Holster by Blade-Tech Holsters, Outside Waistband Open Carry (Right Hand)

  • USA Made: Produced with high strength, heat resistant polymer in the USA. This Blade-Tech Precision molded Springfield Armory XDM 4.5" Holster has a superior fit to Kydex. Carry Confident with your Springfield XDM 4.5" securely and comfortably..
  • Compatibility: This Springfield XDM 4.5" Holster features our versatile mounting pattern which makes it compatible with a huge selection of attachments. The Signature Holster is a great option for everyday Outside the Waistband carry of your Springfield Armory XDM 4.5". This holster comes with our Tek-Lok belt attachment which allows you to get a tight hold on belts from 1.5” to 2.25"..
  • Positive Lock Trigger Guard and Adjustable Retention: The Signature OWB Holster for the Springfield XDM 4.5" is designed with adjustable retention and a positive lock trigger guard. Adjustable retention screws can tighten or loosen the fit of the holster around your firearm while the positive lock trigger guard provides tactile feedback to let you know your firearm is secure..
  • Optics Compatible: Out of the box, the Signature OWB Holster for the Springfield XDM 4.5" is compatible with most optics platforms such as RMR, Red Dot and suppressor height sights..
  • Lifetime Warranty: We offer a Carry Confident Lifetime Guarantee We ....
Check Stock

Ade Advanced Optics 2020 Red Dot Mounting Plate/Base/Adapter for for Vortex Venom/Razor/Viper Burris Fastfire,Meopta,Docter Insight to FIT Springfield XD,XD MOD 2,XDE,XD M ,Hellcat Non-OSP Pistol

  • This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XD(M), XDS....
  • It is design to for Springfield Non-OSP(Non Optics Ready) XD/XDS/XDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It....
  • Fit Ade RD3-006A(Huracan), RD3-006B(Cobra), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex....
  • There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two....
  • Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to....
Check Stock

Springfield XD and Springfield XDM 9mm / .40 / .45 Polymer Retention Roto Holster Black

  • Does not fit XDM ELITE! Finger press Safety holster - Level 2 retention.
  • Rotates 360 degrees for every application (cross draw, etc.).
  • Designed for military & police personnel. Great for civilians & off duty officers.
  • Fits: Springfield XD 9mm/.40/.45 | Springfield XDM 9mm/.40 | HS and XDM pistols from HS Produkt (Croatia).
Check Stock

We The People Holsters - Black - Right Hand - IWB Holster Compatible with Springfield XDm 4.5" Fullsize

  • Specifically designed and molded for the Springfield XDm 4.5" Fullsize, this concealed carry holster is made using only top quality components and with absolute functionality and comfort in mind. Proudly made right here in the USA, each concealed carry holster is backed by a Lifetime Warranty. Whether it is appendix, strong side, behind the hip or cross carry your gun holster will accommodate any carry draw..
  • In order to be effective for self defense you need to be comfortable with your holster. This compatible with Springfield XDm 4.5" Fullsize holster can be adjusted to your desired height and angle by simply unscrewing the clip, placing it to your desired position, then screwing it back into place. Position your concealed carry waistband holster up, down or canted to achieve your desired tilt angle for a smooth draw..
  • With its thick wall Kydex construction and comfortable hardware, we have crafted a holster compatible with Springfield XDm 4.5" Fullsize that will unfailingly keep your pistol safe and secure. Kydex holsters are waterproof, washable and will never rot, unlike leather conceal carry holsters. The .08-inch Kydex is robust enough to maintain its rigid structural integrity for a lifetime..
  • Designed to be worn inside the waistband with a belt....
Check Stock