Reviews Spring Square Nut

Wiha 32097 | 7 Piece Insulated SoftFinish Screwdriver Set

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

XtremepowerUS Multiplier Torque Wrench Labor Saving Lug Nut Wrench Cr-v Socket (Torque Wrench W/ 4 Socket) + Case

  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1-inch drive sockets.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut, extension bar helps to r....
Check Stock

Crescent CP4PCSET 4 Pc. Phillips® Acetate Screwdriver Set

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Utoolmart 1/4-inch Drive Chrome Vanadium Steel CR-V Flexible Socket Extension Bar, Length: 150mm, 3Pcs

  • 【Parameter】- Material: Chrome Vanadium Steel(CR-V).
  • 【Material】- Durable Chrome-Vanadium steel with electroplate finish.
  • 【Usage】- Easily solve the repair the car engine stricture uninstall screw, professional deal with ordinary screwdriver can not reach the corners and stenosis..
  • 【Feature】- Spring-loaded ball detents lock in to prevent parts from slipping into machinery.
  • Square drive radius corners reduce tool and socket wear..
  • 【Wide Application】- Can be connected to an electric drill, rechargeable electric drill or manual wrench,stricture, reaches to them unable to arrive at the twist the screw, nut. Pick up the handle is applicable to all electric drill and spanner, functional head is provided with a lock and the magnetic device, ensure the sleeve will not drop..
Check Stock

Wera Kraftform Plus 354 Hex-Plus 3mm Hexagon Professional Screwdriver, 3\ Shaft Length,5023110001

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Impact Grade Socket Wrench Adapter Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks,Sizes 1/4' 3/8' 1/2',Cr-V,Black,3-Piece

  • ☞ PACKAGE CONTAINS:3Pcs - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket wrench adapter set .1/4" 3/8" 1/2" Turns any power drill into a power nut driver Sturdy spring-loaded ball bearing holds sockets securely in place Sockets Snap-On Tightly and Won't Slip Off.
  • ☞USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for Automotive Mechanic Vehicle Repairs, Technicians, Handyman & Hobbyist Developments to use with sockets on Hardware/Tire Nuts, Lag Bolts, Hex Head Cap Screws at Home, Workshop Factory or Construction Site.
  • ☞Multifunction: 3Pcs1/4 3/8 1/2" Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set.
  • ☞Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most ....
Check Stock

5 Pieces Detachable Magnetizer Screw 1/4\ 6.35mm Metal Hex Screwdriver and Power Bits (Yellow)

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Short Stubby Screwdriver with Reversible and Magnetic Bit - Phillips and Slotted-Flat - Gato Tools, Blue

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

ABN Torque Multiplier Wrench – Torque Multiplier 1 Inch Drive Lug Nut Wrench Torque Amplifier Lug Nut Remover

  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut.
  • 3 inch (75mm) extension bar helps to remove nuts quickly after being loosened.
  • Use the square socket for square duel lug studs.
  • PERFECT SIZE FOR YOUR NEEDS: Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1 inch drive sockets.
  • CONVENIENT STORAGE: 15.25 by 8.5 by 4 inch (28.7 by 21.6 by 10.2cm) heavy-duty plastic blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Torque amplifier wrench case features locking latches for added security and molded handle for comfortable travel so you can change your tires anytime, anywhere.
Check Stock

GreatNeck SD11RC 11 in 1 Screwdriver and Nut Driver Set Multi-Bit Cushion Grip Multi Tool Screwdriver Kit HVAC tools Electrician Tools

  • 11-IN-1 SCREW DRIVER SET: features the star tips, Phillips screwdriver bits, flat head screwdriver bits, and square-tip bits used most often by....
  • THOUGHTFULLY DESIGNED: All in one screwdriver features interchangeable shafts for quick bit storage.
  • Superior socket design for secure bit fit.
  • INCLUDES THESE BITS: Slotted or flathead screwdrivers bits (3/16", 1/4"), Phillips head screwdriver bits (#1, #2), Square drive bits (#1, #2), and....
  • DOUBLES AS A NUT DRIVER: Multi screwdriver’s shaft converts to nut driver sizes: 1/4", 5/16" and 3/8".
  • MULTIPURPOSE TOOL: 11 Nut and Screw drivers in one tool. If you're looking for a multibit screwdriver with the most common torx, square bit, slotted,....
Check Stock