Reviews Spring Cylinders

ABN Brake Cylinder Hone – 1-1/8in 3 Stone Piston Honing Tool Cylinder Bore Hone with 3/4in to 2-1/2in Honing Range

  • ...SIER: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the ABN | 1-1/8 Inch Cylinder Bore Honing Tool Small Engine Cylinder Hone Kit.
  • Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders.
  • BUILT TO LAST: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity.
  • The flexible shaft and spread-control tension nut allow faster cutting and maneuverability.
  • 3 stone design makes insertion easy by self-centering.
  • Stone sleeves add strength and protect your abrasive stones when not in use.
  • PERFECT SIZE FOR YOUR NEEDS: Rigid honing tools for a drill features 3 carbide stones that help you remove glaze build up on your brake cylinders.
  • 220 medium grit stones measure at 1-1/8 by 3/16 by 1/8 inches (2.8 by .5 by .3cm).
  • Square ends of stones make this small brake hone tool ideal for step-cut and blind-end cylinders.
  • ADJUSTABLE RANGE: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface.
  • Spring and knurled adjusting nut increase tension and lock the drill hon....
Check Stock

KUNTEC Engine Cylinder Hone Tool 2 -7 Adjustable Deglazer 3inch Blade 220 Grit Stones

  • Engine cylinder hone for deglazing engine cylinders 2-Inch to 7-Inch in diameter.
  • Durable flexible shaft for easy use and self-centering..
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • Cylinder Hone features 3 replaceable 3-Inch long 220 grit stones.
  • 220 grit stones enable faster and smoother removal of deposits and corrosion in engine, brake and all types of cylinders..
Check Stock

VEVOR Hydraulic Directional Control Valve, 1 Spool Hydraulic Spool Valve, 21 GPM Hydraulic Loader Valve, 3600 PSI Directional Control Valve, Hydraulic Valves And Controls For Tractors Loaders Tanks

  • [DOUBLE ACTING]- 1 Spools monoblock for double acting cylinders. Hydraulic control valve for operating double acting cylinders..
  • [Control method]- The valve has a variety of control methods, including manual control, pneumatic control, hydraulic and electric control options..
  • [DURABLE QUALITY]- Come with 1 spools with Joystick Control, 11 GPM Flow, 3600 Max PSI..
  • [SPRING RETURN]- All spools standard come with spring return, which can return to the neutral position..
  • [WIDELY USED]- This valve is widely used in hydraulic systems of construction machinery such as forklifts, sanitation vehicles, small loaders, etc..
Check Stock

Owfeel M18x1.5 DIN Valve Scuba Adapter with Gauge, Pcp Scuba Tank Valve 4500psi Working Pressure with 22-inch-Long Black Hose for Air Tank, PCP Air Rifle, Paintball, and HPA Tank (M18x1.5 Threads)

  • High Pressure Resistance - It could resist working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI, with a gauge to indicate the pressure..
  • Two Types of Threads - One-piece DIN valve has two types of external thread. Sizes: M18x1.5 & 5/8-18UNF. Please check your tank thread before purchasingif you do not know,please contact us..
  • Dual Gauge Design - one gauge indicate tank pressure,the other gauge indicate the inline pressure. WIth 57 cm long stainless steel spring protection hose..
  • Easy Installation and Quick Release - It comes with an 8mm female quick-release coupling plug, and it could be connected and released from other male fittings within seconds..
  • Strong Compatibility - Mainly used for high-pressure gas cylinders, SCBA gas cylinders, SCUBA diving cylinders or PCP gas cylinders, easy to assemble and install, for air/carbon dioxide filling..
Check Stock

5 tons 0.28\ Stroke Hydraulic Cylinder Lifting Jack ram Low Height FPY-5

  • Low height:5 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 7 mm（0.28"） provide the maximum power to height ratio. A compact, low height cylinder design is ideal for confined spaces where other cylinders will not fit.
  • strength and durability: hard chrome plated high quality steel plungers plunger avoid break ing when it is overloaded.
  • Heavy duty spring return: faster retraction increasing productivity, ideal for pulling and pushing in testing, maintenance, and tensioning applications.
  • Oxide finish resists corrosion ensuring long life,Extended height(mm) 48 （1.89"）.
  • Need to work with hydraulic pump: recommend cp-180.
Check Stock

Electric Hydraulic Double Acting Control Valve w/Rocker Switch 2 Spool 15 GPM A Spool Controls Double Acting Cylinders 12 Volt

  • 2 Spools, A Spool (Controls Double Acting Cylinders), 12 Volt.
  • Momentary Rocker Switch includes a 3′ switch harness and 5′ extension valve harness for a total of 8′ between switch and valve allows for easy control with Mountable Switch Bracket.
  • All spools are double acting with spring return to neutral position, A spool is designed to control double acting cylinders, A and B ports are closed to Tank in neutral position.
  • Max Operating Pressure: P = 5080 PSI, T = 3050 PSI, A & B = 5080 PSI.
Check Stock

10 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 11 mm（0.44\） Hydraulic Cylinder Industrial Lifting Jack Ram Low Height

  • *Low height:10 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 11 mm（0.44"） provide the maximum power to height ratio. A compact, low height cylinder design is ideal for confined spaces where other cylinders will not fit.
  • *Stopping ring: protect the cylinder when the stroke get to top, absorbing heaviness from the other side.
  • *Plated steel plungers:hard chrome plated high quality steel plungers plunger avoid break ing when it is overloaded.
  • *Single-acting spring return: provides fast and complete retraction.
  • *Copper ring:high-standard copper welding, protected when the cylinder is loading.
Check Stock

20 ton Ultra-Thin Hydraulic Lifting Cylinders 20 Ton Stroke 0.52\ Hydraulic Cylinder Industrial Lifting Jack Ram Low Height

  • *Low height:20 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 13 mm（0.52"） provide the maximum power to height ratio. A compact, low height cylinder design is ideal for confined spaces where other cylinders will not fit..
  • *Stopping ring: protect the cylinder when the stroke get to top, absorbing heaviness from the other side.
  • *Plated steel plungers:hard chrome plated high quality steel plungers plunger avoid break ing when it is overloaded.
  • *Single-acting spring return: provides fast and complete retraction.
  • * Corrosion resistance:hard chrome plated high quality steel plungers and cylinder wall for increased corrosion resistance.
Check Stock

EWK 1-1/4 to 3-1/2 Inch 3 Stones Engine Cylinder Hone Tool Adjustable Cylinder Deglazer Piston Honer 220 Grit

  • 【Perfect Honing】 EWK cylinder honing tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and....
  • 【Smooth Surface Deglazing】Fits 1-1/4" to 3-1/2" (31.75mm to 88.9mm) diameter brake caliper bores, engine cylinders of automotive, motorcycle and....
  • 【Highly Flexible】 Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The....
  • 【Durable & Long Lasting & Replaceable】 Made of premium steel, maximize the cylinder honing tool with extra strength and durability. The 220 grit....
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast....
Check Stock

ProVision PV2 Flexible Fiberscope / Inspection Scope w/ 36 In Non-Obedient Cable

  • 【Scope of application】Cylinder honing tools are suitable for degreasing engine cylinders with diameters from 3/4 in to 2‑1 / 2 in and 1‑1 / 4 in to 3‑1 / 2 in. The manufacturer's part number is 88233.
  • 【Excellent performance】This tool can be used to remove carbon deposits and hot glaze in the cylinder bore. This special tool can be used for small-bore cylinders, such as motorcycles, brakes, and clutch cylinders, ideal for removing rust deposits in old renovations..
  • 【High quality】The cylinder honing three jaws are made of high-quality iron materials, high strength, high hardness, rust and resistance, not easy to wear and not easy to age, and are made of special technology to enhance their stability and performance to ensure excellent durability and long service life ..
  • 【Ergonomics design】The engine cylinder grindstone adopts ergonomics design, which can be comfortably held, effortless to use, easy to operate, labor-saving, and high-efficiency, bringing you a lot of convenience. Flexible shaft, easy to use, and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole..
  • 【Use steps】Spray lubricant on the stone or cylinder hole. Set the whetstone on the drill bit, insert the engine whets....
Check Stock