Reviews Spout Inserting

1ft Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard

  • Allowing you to connect an additional PSU to your ATX motherboard.
  • Designed for intense Gamining and BitCoin Mining.
  • Compatible with 24P and 20P ATX motherboards (1x 24p (20+4) male port and 2x 24P female ports).
  • Note: Be sure to recognize the direction when inserting the cable. Dont insert the cable backwards or insert the wrong position to prevent the device from being burned. When inserting the cable, hold the socket of the device before inserting the cable to avoid excessive force to insert the socket pin.
Check Stock

Danco Pull-Down Diverter Tub Spout for Delta fits 1/2 in. IPS and 1 in. Delta Brass Tub Spout Adapter in Chrome (10953)

  • DELTA PULL-DOWN DIVERTER TUB SPOUT REPLACeMENT: This Danco Pull-Down Diverter Tub Spout is specifically designed to replace your worn-out, leaky Delta diverter tub spout OEM# RP17453 & RP17454.
  • CONNECTION SIZE: This diverter tub spout is compatible with 1/2 inch IPS front connections and will also fit Delta 1 inch brass tub spout adapters OEM# RP 12307 and RP33794.
  • PULL-DOWN DIVERTER INCLUDED: This tub spout includes a discreetly hidden pull-down diverter that is activated by pulling down on the end of the spout, diverting the water from the bathtub to the shower head.
  • TUB SPOUT REACH: The bathtub faucet spout has a 6 inch reach.
  • BATHTUB SPOUT THREADED DIMENSIONS: The bathtub faucet spout metal threads measures 3-3/4 inch to threads from back of tub spout (tub spout end to the start of the internal threads is 3-1/2 inches), IMPORTANT to measure your stub out nipple to ensure it is at least 3-3/4 inches long.
Check Stock

Frienda Gas Can Spout Gaskets Rubber Ring Can Gaskets Fuel Washer Seals Spout Gasket Sealing Rings Replacement Gas Gaskets Compatible with Most Gas Can Spout (10 Pieces)

  • EXTENDED SPOUT: This Spout Kit Can Be Used As An Extended Spout Where Length Of The Nozzle Really Matter So As To Access Hard To Reach Places Without Any Spill or Mess. It is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material .Let's hit the roads & transform your old can with this FLEXIBLE GAS SPOUT REPLACeMENT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents you from spills by making it easy to bend the spout to reach any direction..
  • As shown in the picture the internal thread size is 1.7 inch, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing..
  • TWO GAS CAN CAPS: Black cap is fine coarse and used for older Briggs and Stratton, Rubbermaid, Essence, Blitz and Gott cans. Yellow cap is Coarse Thread and used for Midwest, Scepter and Chilton, Jerry can adapter. One of the great ways to transform your old gas cans with a new touch. There's no reason to put away the rusty cans when you have a 5 Gallon Gas Can Nozzle Replacement from Kool Products. This Flexible Gas Can Nozzle also has a smooth flow action manufactured excellently.
  • SUPER FLEXIBLE SPOUT: You Can Add As Many Spouts You Want & Still....
Check Stock

KWODE 12 Inch Swivel Gooseneck Spout Replacement Parts for Commercial Kitchen Sink Faucet 360° Swing Nozzle Add-on Spout, Brass Constructed Chrome Finish

  • ✅ Commercial Faucet Spout Replacement: 12 inch swivel gooseneck spout with swing nozzle is designed for all brand commercial kitchen faucet working on 2 or 3 bowls sinks.(faucet spout connector size is M25*1.25MM, please pay attention).
  • ✅ 12 inch Swing Nozzle Spout: 12” spout reach,10.4” spout height,it is the same quality with KWODE commercial faucet, most used for home,restaurant, industrial big hole prep & utility sink..
  • ✅ 360°Spout Body: This faucet spout can be rotated 360 degree by hand, stainless steel constructed, chrome polished finish, make it long lifespan, easy to clean and maintain.durable and sturdy, no water leaking complains..
  • ✅ Easy to Install and Remove: Max 2.2GPM, easy to install it, just remove the old one and install the new one less than 5 minutes by DIY installation. ( Tip: two gasket is already kept in connector side,just connect it no water tape at first.).
  • ✅ Reliable Quality Spout: Just 12 inch faucet gooseneck spout only, no included commercial faucet, 12 months warranty for this spout, any issue, please contact us from your order (the spout is good for KWODE, JZ,IM,MS commercial faucet, please make sure the connector size is M25*1.25MM, before you making the order.).
Check Stock

KWODE 10 Inch Gooseneck Swivel Spout for All Brand Commercial Kitchen Sink Faucet Swing Nozzle Add-On Spout Replacement Parts Chrome Polished Finish

  • ✅ Commercial Faucet Spout Replacement: 10 inch swivel gooseneck spout with swing nozzle is designed for all brand commercial kitchen faucet working on 2 or 3 bowls sinks.(faucet spout connector size is M25*1.25MM, please pay attention).
  • ✅ 10 inch Swing Nozzle Spout: 10” spout reach,10.4” spout height,it is the same quality with KWODE commercial faucet, most used for home,restaurant, industrial big hole prep & utility sink..
  • ✅ 360°Spout Body: This faucet spout can be rotated 360 degree by hand, stainless steel constructed, chrome polished finish, make it long lifespan, easy to clean and maintain.durable and sturdy, no water leaking complains..
  • ✅ Easy to Install and Remove: Max 2.2GPM, easy to install it, just remove the old one and install the new one less than 5 minutes by DIY installation. ( Tip: two gasket is already kept in connector side,just connect it no water tape at first.).
  • ✅ Reliable Quality Spout: Just 10 inch faucet gooseneck spout only, no included commercial faucet, 12 months warranty for this spout, any issue, please contact us from your order (the spout is good for KWODE, JZ,IM,MS commercial faucet, please make sure the connector size is M25*1.25MM, before you making the order.).
Check Stock

KWODE Swivel Swing Nozzle Spout 12 Inch Replacement Kit for Commercial Kitchen Sink Faucet Stainless Steel Add-on Spout Fits for 2 or 3 Bay Compartment Sinks, Chrome Finish (M25*1.25mm)

  • ✅ Commercial Faucet Spout Replacement: This Spout Faucet connected size is M25*1.25MM, 12 Inch Spout reach, 5.5” spout height, replacement spout for KWODE commercial faucet or other the connector size with M25*1.25mm faucet (please make sure for your commercial faucet connector size, before you making the order.).
  • ✅ 12 inch Gooseneck Swivel Spout: 12 inch spout reach is designed for commercial faucet working on 2 or 3 bowls prep & utility stainless steel compartment sinks at home, restaurant or industrial kitchens..
  • ✅ 360°Faucet Spout: This swing nozzle spout can be rotated 360 degree by hand, stainless steel constructed, chrome polished finish, make it long lifespan, easy to clean and maintain.durable and sturdy, no water leaking complains..
  • ✅ Easy to Install and Remove: Max 2.2GPM, easy to install it, just remove the old one and install the new one less than 5 minutes by DIY installation. ( Tip: two gasket is already kept in connector side,just connect it no water tape at first.).
  • ✅ Reliable Quality Spout: Just 12 inch faucet swivel spout only, no included commercial faucet, 12 months warranty for this spout (the spout is good for KWODE, JZ,IM,MS commercial faucet, please make sure the connector size is M25*1.25MM, before you making the or....
Check Stock

Lord & Hodge 1073A-1 Grommet Kit

  • Number of Grommet Sets Per Kit: 24 Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die..
  • A handy, compact, economical kit complete with tools and 12 rustproof brass grommets for immediate replacements or repairs in canvas or plastic..
  • Easy to follow instructions #0, 1/4" inner diameter Manufacturer: Lord & Hodge..
  • Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die. No. 1073A 0: 1 4.
Check Stock

Lisle 19702 Dispenser with Lid and Cap - 8 Quart Capacity,Grey

  • Long Flexible Universal Spout - EZ Pour Gas Can Spout is a sturdy choice, made with an extra-dense material, something that will not get brittle and crack in the cold. This single spout is designed to ensure a fast flow, letting you spend less time in the cold and saving your time..
  • Lightweight And Durable - This gas can spout is lightweight and durable. You can easily attach it to most any gas and water cans for keeping spare gasoline or completing chores for your home or farm. With this gas spout kit, you can have your old gas cans feeling new. This kit is a unique spout, one 8 inch HI-FLO spout and another 8" Spout Extension for those hard-to-reach tanks. A 1/2” replacement push-in vent, filter screen, and second base cap to fit additional cans are also included..
  • Resilient And High-Quality Material - This universal kit includes one 8 inch HI-FLO Spout and one 8 inch extension. It does everything it says it will without a struggle..
  • Comes With Everything You Need - A universal gas can spout, and it comes with one 8 inch HI-FLO Spout and one 8 inch extension and the necessary accessories to hook them up. Yes, that includes the vents and screw caps. These spouts are great and will work on most cans..
  • Made From Extra Dense Material - We are focuse....
Check Stock

KP KOOL PRODUCTS Long Flexible Gas can spout- Gas can spout Replacement Old Style - Gas can Nozzle Replacement for 5 Gallon can - Old Style Kit with Vent Cap for Easy Flow of Fuel, Pack 1

  • UPDATe YOUR OLD GAS CANS & JUG. This Spout Kit is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material. Let's hit the roads & transform your old can with this FLEXIBLE LONG REPLACEMENT GAS CAN SPOUT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents from spills by making it easy to bend and reach any direction..
  • As shown in the picture the internal thread size is 1.7 inch, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing..
  • PACK OF 1 Gas Spout Kit including gas can gasket. Spout Length: Approx. 11”. Spout Fits on most of the cans out there. Our Gas Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can Spout replacement is the best way to stop fuel shortcomings..
  • SCREW COLLAR CAPS (1 Yellow and 1 Black). The outer diameter including side ribs: 2.75". Please check dimensions of hole of your can. Our Gas Can Spout helps get rid of inconveniences while traveling. Our Universal Gas Can Spout is providing our customers to make their transport safe & comfortable..
  • stopper cap is used as a gas can cap f....
Check Stock

KWODE 8” Swivel Swing Nozzle Spout Replacement Kit for All Brand Commercial Kitchen Sink Faucet with M25*1.25mm Connector Size and 2.2 GPM Aerator, 360°Stainless Steel Add-on Spout Chrome Finish

  • ✅Commercial Faucet Spout Replacement: This 8 inch swivel spout is designed for wall mount or deck mount commercial faucet with M25*1.25mm connector size, 8" add on spout is designed for 1 or 2 compartment, please pay attention).
  • ✅8 inch Swivel Swing Nozzle Spout: 8 inch spout reach and 5.5 inch spout height, 2.2GPM Max water Flow, good design for wall mount or deck mount faucet even commercial pre-rinse faucet working on 1 or 2 prep & utility compartment sinks..
  • ✅360°Short Add-on Spout: lead free stainless steel constructed, polished chrome surface with high hardness and heat resistance characteristics. You can rotated the spout 360 degree by hand, easy to control and use..
  • ✅ Easy to Install and Remove: Max 2.2GPM, easy to install it, just remove the old one and install the new one less than 5 minutes by DIY installation. ( Tip: two gasket is already kept in connector side,just connect it no water tape at first.).
  • ✅ Reliable Quality Spout: Just 8 inch faucet spout only, no included commercial faucet, 12 months warranty for this swivel spout, any issue, please contact us from your order directly (the spout is good for KWODE, JZ,IM,MS commercial faucet, please make sure the connector size is M25*1.25MM, before you making the order.).
Check Stock